PDA

View Full Version : Dct4 Imei Changer Software Here!!!!



lolly
04-02-2003, 11:10 PM
IVE FOUND A WEB SITE THAT SELL IMEI CHANGING SOFTWARE FOR DCT4 PHONES.

HERES THE LINK http://www.vshgsm.net/index2.htm

IF YOU GOT TO THE LINK PAGE, AND CLICK PRODUCTS AND THEN THE NEXT PAGE CLICK "BUY", YOU WILL SEE.

IT SAYS E-MAIL THEM FOR A PRICE, AND THAT IT WORKS BY PATCHING THE FLASH FILE!!!!!!!!

IVE GOT NOTHING TO DO WITH THIS WEB SITE, SO DONT SHOOT THE MESSANGER!!!!! IF YOU GET MY DRIFT.

IM JUST EXCITED THAT THERE MIGHT FINALLY BE SOME LIGHT AT THE END OF THE TUNNEL

LOLLY

AiR-A
04-02-2003, 11:35 PM
Iv'e got my doubts.
Anyone that can verify that it is for real?
/AiR-A

lonegunman
05-02-2003, 12:25 AM
FAKE, all it does is somehow is to change the *#06# version of the IMEI not the bit we are all after in changing.

AiR-A
05-02-2003, 10:06 AM
Okey, so this means that even if you change the *#06#-imei, the phone is still barred? You can't make a phonecall, right?
/AiR-A

lonegunman
05-02-2003, 10:09 AM
As like the DCT-3 nokia phones the IMEI is stored in 2 place's, 1 real and 1 for show, this only change's the 1 for show.

AiR-A
05-02-2003, 10:10 AM
But still, this means that you can't make a phonecall if the phone is barred?
I mean, even if you change the imei for show?

lonegunman
05-02-2003, 10:14 AM
The phone is still barred, so you need to change the UEM chip and put new IMEI number in to un bar it.

NDI
06-02-2003, 06:58 PM
OMG!!

Ok this is the kinda thing i've been looking for.

If that software can patch the phones Flash, i might be able to decompile it and actually do what dave intended on doing.

Anyone know what language it was written in?

If poss someone send me the source :D


As you know, the DCT4 phones flash is encoded. To do ANYTHING you first need to decode the flash. So whoever wrote that program must have decoded part of the flash. So if we can get the source code, we can then pick up where that guy left off

Anyone understand me?

Z0l
06-02-2003, 08:04 PM
M8s...
Think. What was the meaning of partial flashing? To force the phone to read the MSID from another place. If we could force the soft of a DCT4 to read the IMEI from another place than the UEM chip we're done. These Nokias don't even charge battery without software :) Shure this can be done.

NDI
06-02-2003, 08:07 PM
exacticaly.

All we need to do is :

a. Get a newish nokia DCT4 flash (software)
b. Decode it.

Then were rolling :D

NDI
07-02-2003, 12:25 AM
has anyone managed to get a copy of that prog yet?

also, just being a smartarse, but on his site (http://www.vshgsm.net/index2.htm)
hasnt he spelt develop wrong?