Mikolson
26-02-2003, 01:25 AM
Changes/improvements made from version 5.57 to version 5.80:
- USSD:
- Send USSD returns complete response
- "*" character is handled correctly in USSD input
- SMS:
- Erased concatenated SMS's are not shown when new one comes
- GPRS: - FDN support for GPRS connection
- Call and network management:
- Call using ALS line 2 handled correctly
- DTMF imporvement; beep sound stops when accessing voice message box
- Call divert status is shown correctly
- In Chinese UI mode the setting "Hide clock" works correctly with Calendar alarms
- USC-2 support for ringing tone title
- SIM Wake Up message is displayed longer time
- Operator list updated
Changes/improvements made from version 5.54 to version 5.57:
- China input improvement: in SMS editor "?" is shown instead of an empty "box"
- SIM lock improvement
- Operator list updated
Changes/improvements made from version 5.11 to version 5.54:
- Timer T3186 is reset, when camping to the new cell starts
- Improvements to SI13 refresh on ext-BCCH
- Improvement to camping on PCCCH; now possible to camp on cell after PSI1 and PSI2 are received. Earlier PSI1, PSI2 and PSI3 were all needed
- RAC_valid invalidated after every detach (local or procedure)
- Improvement to MS functionality: in NW, which continuously rejects the TBF establishment by sending immediate assignment reject
- Improvement to cell reselection in case where C2 parameters are used for cell prioritisation
- When MS lost coverage and returns service in a new RA and network mode of operation is I, then RAU is performed with update type combined RA/LA updating. If RA is not changed then update type is combined RA/LA updating with IMSI
- Total PLMN search timer value is optimised for every used band combination.
- Pending or suspended PLMN search is started, if own SI search is ongoing during TBF release.
- Improvement to SI search in case where SI13 is received with changed BCCH_CHANGE_MARK.
- Improvement to cell reselection in case where reselection reason is abnormal cell reselection.
- Attempt counter for unresponded attach request, detach request and routing area update request was increased after every request. Now attempt counter is increased after 5 requests.
- Improvements to RAU procedure in case where NM0 changes from NM02 to NM01.
- Improvement in own SI search clearing when target cell reading is started in TBF mode.
- Improvement in reception of too many erroneous PSI blocks.
- Optimisation to 900->1800 cell reselection time.
- Direct hopping improvement: The length of the reassembled block is correctly updated to the actual output block length field, which is used in decoding of the message.
- Improvement in PFI value handling in Packet Resource Request
- Pending channel configuration optimised neighbour SYNC or PSW measurement during TBF causing long cell reselection time.
- Improvements in Early Classmark sending in PCCCH
- Improvements in handling the rejection cause #15 "No suitable cells in LA"
- Improvements in timing offset threshold for early SCH measurement in a PDTCH configuration. Now neighbour synchronisation is not missed in certain situations.
- If network transmits a message with incorrect values in non-GPRS cell options IE, then non-GPRS cell options IE is marked as not being present in the message. Implementation changed to cope with incorrect message.
- Not able to handle Immediate Assignment if it came in two parts (two-message assignment). Now two message assignments handled correctly
- Improvements in handling of the MPH_NEXT_CELL_REQ message in PCCCH cell.
- Cell reselection not allowed to perform a barred cell during ongoing DL TBF.
- Handling of the combined RAU accepts during MM state "Receive RR Activation Response" improved.
- Neighbour measurements are resumed after non-DRX->DRX (PCCCH)
- When SMS character coded NITZ or flexible PLMN name had 7 spare bits in the last octet, then the name length was calculated 1 character too long. Therefore in display an extra '@' character was shown when name length was 7, 15, 23, 31 or any other (8 * n - 1) length
- TA update procedure changed. Latest sent TAI info is reused now as long as it is valid even if we get new values for the other direction. This change avoids gaps in the earlier procedure in receiving continuous TA blocks when taking the new TAI values in use.
- When PCCCH is accessed RSSI values are changed so that reselection is triggered. After successful reselection to another cell auto PSI1 -procedure is completed correctly.
- With several band combinations maximum PLMN search time is correctly set when e.g. next cell request received during suspended PLMN search.
- The cell, where SI/PSI13 is received, is supposed to support GPRS. Earlier GPRS support was marked as true only if PBCCH description is present in the SI13.
- Improvements for SMS stability
- Compact business cards are received as normal SMS
- Alarm Clock Indicator at start up improvement. Indicator was sometimes displayed briefly at start up even Alarm Clock was not activated.
Changes/improvements made from version 5.06 to version 5.11:
- Support for new type of flash device added (improvement for production)
- Updated list of operators
Changes/improvements made from version 4.53 to version 5.06:
Call and network management
- Improvements in Call Cost Settings, current value visible
- Improvement in Call Divert
- Stability improvements in Private in Conference Call
- Improvement in call menu
- Improvements in USSD
- Improvements in manual PLMN search
GPRS
- GPRS Attach and PDP Context Functionality at the service lost. PDP context not re-activated in service lost.
- Improvements in GPRS roaming and roaming notes
- Improvements in cell reselection speed
- Improvements in attach reject handling from network
- Improvements in dial-up & voice call simultaneously handling
- Improvements in data transfer with fixed alloc.
- Improvements in base band hopping
WAP
- Locked user settings are viewable
- Browser conform to WAP1.3 spec for go element attribute cache-control (no-cache)
- Scrolling up and down in select lists improved
- Improvement in showing animated GIFs
- Improvements in WAP browsing. WAP Header line sometimes overlapping with globe graphic.
- HTTP accept header for "Service Indication" added to indicate the support (MIME type: application/vnd.wap.sic).
DATA
- Improvement to situation where data call is on and then someone (e.g. WAP UI) is starting to release the call
- GPRS commands:
- ATZ does not reset to default configuration
- Improvement in ATZ (call control) implementation
- Improvement in WAP over CSD disconnection
- +CGREG support added
Phonebook
- Quick Saving to SIM corrected
- Stability improvement in speed dial
- Index numbers corrected in menu in Arabic
- Stability improvements with CLI logos
Messaging
- Improvements in Message menu
- Stability improved with Use number and Details view with some languages
- Message sorting changed in inbox
- Stability improvements in receiving corrupted messages
- Stability improvements when using T9
- Improvements in SMS receiving
- Receiving no-titled ringing tone improved
- Web address is also sent when sending business card
Other changes
- Improvement in the function of End key in some cases.
- Improvement in showing received ringing tones
- Minor improvement in timed profile
- Improvement in Operator logo display
- Improvement on key handling in Voice Command menu
- Correction on IR activation with voice command
- Improvement on key handling while recording
- Stability improvement on Voice Commands
- Correction in voice tag recognition after changing SIM
- Correction in Restore Factory Settings
- Many decimal points not anymore possible in calculator
- Calculator with Arabic and Hebrew improved
- Improvements in SIM ATK GET INPUT, extra dots removed
- Improvements on renamed profile names
- SIM ATK Correction when asking SMS Centre number, if SMSC number not set
- Correction on countdown timer
- Improvement on alarm setting
- NITZ Time Zone improvement
- USSD:
- Send USSD returns complete response
- "*" character is handled correctly in USSD input
- SMS:
- Erased concatenated SMS's are not shown when new one comes
- GPRS: - FDN support for GPRS connection
- Call and network management:
- Call using ALS line 2 handled correctly
- DTMF imporvement; beep sound stops when accessing voice message box
- Call divert status is shown correctly
- In Chinese UI mode the setting "Hide clock" works correctly with Calendar alarms
- USC-2 support for ringing tone title
- SIM Wake Up message is displayed longer time
- Operator list updated
Changes/improvements made from version 5.54 to version 5.57:
- China input improvement: in SMS editor "?" is shown instead of an empty "box"
- SIM lock improvement
- Operator list updated
Changes/improvements made from version 5.11 to version 5.54:
- Timer T3186 is reset, when camping to the new cell starts
- Improvements to SI13 refresh on ext-BCCH
- Improvement to camping on PCCCH; now possible to camp on cell after PSI1 and PSI2 are received. Earlier PSI1, PSI2 and PSI3 were all needed
- RAC_valid invalidated after every detach (local or procedure)
- Improvement to MS functionality: in NW, which continuously rejects the TBF establishment by sending immediate assignment reject
- Improvement to cell reselection in case where C2 parameters are used for cell prioritisation
- When MS lost coverage and returns service in a new RA and network mode of operation is I, then RAU is performed with update type combined RA/LA updating. If RA is not changed then update type is combined RA/LA updating with IMSI
- Total PLMN search timer value is optimised for every used band combination.
- Pending or suspended PLMN search is started, if own SI search is ongoing during TBF release.
- Improvement to SI search in case where SI13 is received with changed BCCH_CHANGE_MARK.
- Improvement to cell reselection in case where reselection reason is abnormal cell reselection.
- Attempt counter for unresponded attach request, detach request and routing area update request was increased after every request. Now attempt counter is increased after 5 requests.
- Improvements to RAU procedure in case where NM0 changes from NM02 to NM01.
- Improvement in own SI search clearing when target cell reading is started in TBF mode.
- Improvement in reception of too many erroneous PSI blocks.
- Optimisation to 900->1800 cell reselection time.
- Direct hopping improvement: The length of the reassembled block is correctly updated to the actual output block length field, which is used in decoding of the message.
- Improvement in PFI value handling in Packet Resource Request
- Pending channel configuration optimised neighbour SYNC or PSW measurement during TBF causing long cell reselection time.
- Improvements in Early Classmark sending in PCCCH
- Improvements in handling the rejection cause #15 "No suitable cells in LA"
- Improvements in timing offset threshold for early SCH measurement in a PDTCH configuration. Now neighbour synchronisation is not missed in certain situations.
- If network transmits a message with incorrect values in non-GPRS cell options IE, then non-GPRS cell options IE is marked as not being present in the message. Implementation changed to cope with incorrect message.
- Not able to handle Immediate Assignment if it came in two parts (two-message assignment). Now two message assignments handled correctly
- Improvements in handling of the MPH_NEXT_CELL_REQ message in PCCCH cell.
- Cell reselection not allowed to perform a barred cell during ongoing DL TBF.
- Handling of the combined RAU accepts during MM state "Receive RR Activation Response" improved.
- Neighbour measurements are resumed after non-DRX->DRX (PCCCH)
- When SMS character coded NITZ or flexible PLMN name had 7 spare bits in the last octet, then the name length was calculated 1 character too long. Therefore in display an extra '@' character was shown when name length was 7, 15, 23, 31 or any other (8 * n - 1) length
- TA update procedure changed. Latest sent TAI info is reused now as long as it is valid even if we get new values for the other direction. This change avoids gaps in the earlier procedure in receiving continuous TA blocks when taking the new TAI values in use.
- When PCCCH is accessed RSSI values are changed so that reselection is triggered. After successful reselection to another cell auto PSI1 -procedure is completed correctly.
- With several band combinations maximum PLMN search time is correctly set when e.g. next cell request received during suspended PLMN search.
- The cell, where SI/PSI13 is received, is supposed to support GPRS. Earlier GPRS support was marked as true only if PBCCH description is present in the SI13.
- Improvements for SMS stability
- Compact business cards are received as normal SMS
- Alarm Clock Indicator at start up improvement. Indicator was sometimes displayed briefly at start up even Alarm Clock was not activated.
Changes/improvements made from version 5.06 to version 5.11:
- Support for new type of flash device added (improvement for production)
- Updated list of operators
Changes/improvements made from version 4.53 to version 5.06:
Call and network management
- Improvements in Call Cost Settings, current value visible
- Improvement in Call Divert
- Stability improvements in Private in Conference Call
- Improvement in call menu
- Improvements in USSD
- Improvements in manual PLMN search
GPRS
- GPRS Attach and PDP Context Functionality at the service lost. PDP context not re-activated in service lost.
- Improvements in GPRS roaming and roaming notes
- Improvements in cell reselection speed
- Improvements in attach reject handling from network
- Improvements in dial-up & voice call simultaneously handling
- Improvements in data transfer with fixed alloc.
- Improvements in base band hopping
WAP
- Locked user settings are viewable
- Browser conform to WAP1.3 spec for go element attribute cache-control (no-cache)
- Scrolling up and down in select lists improved
- Improvement in showing animated GIFs
- Improvements in WAP browsing. WAP Header line sometimes overlapping with globe graphic.
- HTTP accept header for "Service Indication" added to indicate the support (MIME type: application/vnd.wap.sic).
DATA
- Improvement to situation where data call is on and then someone (e.g. WAP UI) is starting to release the call
- GPRS commands:
- ATZ does not reset to default configuration
- Improvement in ATZ (call control) implementation
- Improvement in WAP over CSD disconnection
- +CGREG support added
Phonebook
- Quick Saving to SIM corrected
- Stability improvement in speed dial
- Index numbers corrected in menu in Arabic
- Stability improvements with CLI logos
Messaging
- Improvements in Message menu
- Stability improved with Use number and Details view with some languages
- Message sorting changed in inbox
- Stability improvements in receiving corrupted messages
- Stability improvements when using T9
- Improvements in SMS receiving
- Receiving no-titled ringing tone improved
- Web address is also sent when sending business card
Other changes
- Improvement in the function of End key in some cases.
- Improvement in showing received ringing tones
- Minor improvement in timed profile
- Improvement in Operator logo display
- Improvement on key handling in Voice Command menu
- Correction on IR activation with voice command
- Improvement on key handling while recording
- Stability improvement on Voice Commands
- Correction in voice tag recognition after changing SIM
- Correction in Restore Factory Settings
- Many decimal points not anymore possible in calculator
- Calculator with Arabic and Hebrew improved
- Improvements in SIM ATK GET INPUT, extra dots removed
- Improvements on renamed profile names
- SIM ATK Correction when asking SMS Centre number, if SMSC number not set
- Correction on countdown timer
- Improvement on alarm setting
- NITZ Time Zone improvement