3210 led change

[Alex2003]

soon i'm gonna buy a soldering iron and i wanna change leds for 3210
first of all what shuld i need for these
what sodering iron(how many watts?)
and all of the things i need
and how i install the leds( i wanna install white leds like 8310 got)
what transistors shuld i bridge?

p.s
i'm from israel
anyone from israel too
and he know where to buy leds

[w0rf]

I think u wanna start with the most difficult leds to change

3210-> 0603 leds
I think the 0805 for my 33xx where difficult enough:)

u will need a very fine solder tip, for the solder bridges u need to make for bright leds -> http://www.bluled.co.uk/

its all explained with pictures.

btw..be very carefull when taking the leds of...if u use power..the contacts are easily damaged

[Alex2003]

So u Think i shuld start from 5110 or its the same?

[Furgo]

Read these sites mate.

www.bluled.co.uk
www.jbphonetech.info
www.blue-backlight.de ( German )
www.umbau-kult.de ( German )
www.te-elektronik.com ( German )

u will need a fine tipped, 11w - 15w max solderin iron with a tip really not bigger than 1mm

U will need a needle longer thinner and sharper the better,

i recomend flux

u will need some solder, only little bits though.

an if u are planin on fittin blue white true green or pink/purple led's then u will need a transistor.

most importantly u need patience, not everyone gets it right first time round, i didn't..

wOrf try fitting 0603 to a 33x0 thats difficult.

Hope this helps u out a bit

B.R

Furgo

[Alex2003]

thanks

[chunkhead]

We covered this a little while ago and one of the solutions was to modify the tip of your soldering iron to give it two prongs! it makes the 0603 led's a breeze! Check it out!

http://nokiafree.org/forums/showthread.php?s=&threadid=15296&highlight=leds+changing