ProjecT 5110 1.5

[BOEBOE]

Hello everyone, better late then never...:rolleyes:

Changes:

*Starttone
*Fade In-Out
*Changed texts of the Dutch, English, and Comm lang_chunk.
*Some of those are blinking
*Removed all other languages to free more space
*Linefeed & Blinking character added
*Repositioned the special characters
*Inverted screen
*Slideshow
*Changed 60% of the graphics
*Changed font
*Changed ringtones (42)
*Sms-tones (3 changed)
*Repositioned the menu.

Special thanks goes to:
bglan: ENGL lang chunk
pawaka: Graphics
...

Use:

-Flash the file with Rolis 4.78b6
-Wait -> Open NokTools 1.9 by Rolis
-Press the read button
-Press FAID ->wait for the startup sequence
-Press SP -> ||
-Press SFR
-Press SW Reset
-Phone off
-Phone off
-And look...:eek:

Note: #0000# -> Slideshow*
*0000# -> Warranty menu
*#0000# -> SW-version

Offset for slide frame #1: hex: 000AC698 dec: 706200
Offset for slide frame #2: hex: 000AC890 dec: 706704
Offset for slide frame #3: hex: 000ACA88 dec: 707208
Offset for slide frame #4: hex: 000ACC80 dec: 707712

Cheers

[battouter]

yeeehaaa! nice work!

:D

[BOEBOE]

Now working on
-ProjecT 5110 1.50b (17-03-03
-ProjecT 3310 1.00 (30-03-03)

[battouter]

hey boe... what would be in the new version?
i tried patching my 5110 fls with netstrength and slideshow using g3n0lite 1.7... worked ok but when i run slideshow, the signal bar would not go behind the slideshow (the slideshow is supposed to cover the whole display right? 84x48) did you encounter this problem? one more thing... how do you change the *#746025625# to activate slideshow (i want it different e.g. *#12345#) or better how do i create n extra menu to run slideshow? any suggestions? anyone?

[BOEBOE]

Bugfixes.

About the Slideshow: It should cover the whole screen

Slideshow code : Open hexeditor and search for *#0000
You will see * #sim0clock somwhere and jsu tchange it to: #0000 for the last bytes, go to the hex part and type 00 00 00 ...

[Damian]

@boeboe

when i try to open the flash in rolis 4.78 (006) it says that the flash is not a valid flash file or it is not complete.....any idea what i am doing wrong? should i open it as an MCU or PPM or was i right in opeing as a flash?

Damian

[battouter]

Originally posted by BOEBOE
Slideshow code : Open hexeditor and search for *#0000
You will see * #sim0clock somwhere and jsu tchange it to: #0000 for the last bytes, go to the hex part and type 00 00 00 ...

it didnt quite get that... explain more please :confused:

thanx!

[seb87]

i have a cable this is plugged into my com1 port,can i use it to flash my phone,or is that not a flasher cable???

[ldicdican]

Originally posted by seb87
i have a cable this is plugged into my com1 port,can i use it to flash my phone,or is that not a flasher cable???

i think that is an mbus or mbus/fbus cable, and surely not a flasher.
with an mbus cable, you can't flash a phone by only using that cable, you need a flasher cable that connects to LPT port of ur computer...

m8s, correct me if i'm wrong...

:)

[BOEBOE]

totally rite!

[dave8210]

HI m8s!

I have a 5110, flasher cable, Fbus cable, Rolis Flasher, Eeprom tools, FaidMonster and so on.

Nothing works!!!
Is it WinXP that is the problem or is it my Intel 815 chipset???
Have problems wit logomanager - only works sometimes. Think it is my chipset.
Any suggestions???
Rolis sais "Could not prepare phone" or something like that.

H E L P !
please....
______________________
29.03 01:04AM - Found the problem...
XP needs this program: UserPort

[Damian]

i'm not 100% but i think you need a program called 'userport' or something very similar. i think its in the download section.....if you do a search it will be around somewhere........



Damian

[dave8210]

Originally posted by Damian
i'm not 100% but i think you need a program called 'userport' or something very similar. i think its in the download section.....if you do a search it will be around somewhere........



Damian
Thanks Damian!
Have already figured it out...

Here is the prog:

[juniore_806]

Originally posted by BOEBOE
totally rite!

I already downloaded the 5110 modz file... But when I open it... there's nothing inside...

pls help me to download it perfectly... I already did "save target as" but the same problem....

[BOEBOE]

Works fine for me, try using WinRAR 3.0.

[pedrofarinha]

it simply rocks!!! why dont you make a projecT for 6210/6250?? ;)

cheers,
Pedro.:grin:

[BOEBOE]

I could, but I don't have the phones.

[gsmsolutionsltd]

nice work...........respect

[BOEBOE]

Originally posted by pedrofarinha
it simply rocks!!! why dont you make a projecT for 6210/6250?? ;)

cheers,
Pedro.:grin:

ProjecT 3310 develop stooped, changing it now to ProjecT 6150!!
Sorry, maybe I'll get a 3310 in my hands someday...

[ME123]

is it ok to use the compatibility thingy in win xp as both those programs u mentioned dont like win NT/2000

so can i jus tell them its win 98 there runnin on and it ull work fine

[BOEBOE]

Yes, set Rolis Flasher in Win98-mode

[Thanh]

Hello :)
This modded flash looks exactly like the one i WANT for my phone, my OLD phone, that is.... but... it is a 5130.....................
Dear Boeboe, is there any way to apply the changes you did to that 5110 file also to a 5130-file? I have never done anything like this before as i am strictly a hardware guy, and i don't even have a flasher cable (no $ for that) but if i had the file, i could get someone to flash the phone for me.
Please, let me know how to do that...... Thanks a million!
Your Thanh.....

[ldicdican]

Originally posted by Thanh
Hello :)
This modded flash looks exactly like the one i WANT for my phone, my OLD phone, that is.... but... it is a 5130.....................
Dear Boeboe, is there any way to apply the changes you did to that 5110 file also to a 5130-file? I have never done anything like this before as i am strictly a hardware guy, and i don't even have a flasher cable (no $ for that) but if i had the file, i could get someone to flash the phone for me.
Please, let me know how to do that...... Thanks a million!
Your Thanh.....

don't try to flash a 5110 flash file to your 5130 phone, it won't work. that is tested and already experimented, i'm not sure of the problem but I'M REALLY SURE THAT IT WON'T WORK on 5130.

- i think it will result to "No Network"...
- you can try it yourself BUT BE SURE YOU MAKE A BACKUP FIRST BEFORE FLASHING!
-just an advise!
BR,

[BOEBOE]

@ Thanh

Hello, I know my flash is great :p

But it ain't nothing compared to my new 1.60 version...

So I will not port v1.50 to 5130.

And don't try to flash it on that phone, you won't get network...

This new 1.60 will be released in 2 months, because I have to wait for Genolite 2, g2 will include a GUI thingy, that makes the Menu, OK, Back text to be replaced by grphX.

I will release 2 flashes, English and Dutch, that is, because I've added +ADD_TEXT stuff in my menu with own languages...

I can release a English version for the 5130... Dutch and English are the only languages I speak... French too, but... ;)

And now... Some Q's for you.

What do you think about the Inverted LCD patch in 1.50?

The tones? (Actually stupid Q, 1.60 tones are MUCH better...)

Netstrength (I think I'm gonna patch Diagonal lines moving up, 5 frames. But I saw that these bars come too the text of the screen... The bars are 6 Pixels with, and must be 5 Pix to don't touch your op.logo.
Example:

Normal bars:

||||| Operator.logo

G3 bars:

||||||Operator.logo

-----------

Should I patch 7 Bars battery (OFCOURSE)

Slideshow (What grphX do U wan't)

Menu Pix (1.60 will be MUCH better, thanks to Romeo26222, mekme, SmarKieS => I didn't draw a single menu PIXEL)

Greetz,

BOEBOE.

[Thanh]

Hello again :)
Thank you for the hint with that c1.60... i will wait for it then :)
I yet can't try the 1.50 because i have no 5110 but only a 5130..... And i know that i can't flash that with a 5110-file because there will be trouble with the network after flashing. Besides, i have myself no flashing equipment, i will need to take the phone and the flash file to someone who got the flasher cables and stuff, i myself have only a m/f-bus for that phone.
I have already done some modifications to it, but only hardware wise... flashing antenna, transparent cover, white LED's for the keypad and blue ones for the display. It looks stunning for such an old phone, and the crown to that would be a nice modded flash with stuff such as many ringtones, ability to send blinking SMS, more or at least different Network- and battery bars etc etc. Also fading LED's would be great :)
About the languages, my phone got a lot of languages inside, it's an asian version, it includes thai (i am in Thailand), chinese, even hindi. But SMS can be written only in english anyway. If you could make a flash file for that 5130 it is perfect ok for me if it has only english, as i am no native thai and would need thai only for sending thai SMS which that phone so-or-so can't do :)
After all, i got my 6610 for that. About inverted LCD, i nevcer yet saw a phone "live" with that feature, but i am sure it would look SUPERB with the blue LED's, combined with my operator logo..... i can't even imagine it :)
Well, please let me know when you got such a file ready for use.... i can't wait to have it in my phone!
Kind regards.....
Thanh

PS slideshow? I read a lot about that in the forums, yet i have no clue what it does...?
And... will netmonitor still be available in the modded version of the flash? Because i need it :)

[BOEBOE]

Slideshow: When you pressa specific code, you're phone will show 4 Bitmaps of a size 84x48 slide over eachother. When this is finished, phone will return to the main screen. Cool eh...

Yes, Netmonitor is ALIVE AND KICKING!

[BOEBOE]

Now posting back here...

Thanh, do you have a ROM3 or ROM4 5130?

Netmon. 88


I think... ;)

[ldicdican]

@Thanh,

please check this out... http://nokiafree.org/forums/attachment.php?s=&postid=170987

[Thanh]

Hello again :)
Project T 1.6 ROCKS!! But there's yet bugs.....
The phone reset's after the lights go off, no matter when that is, either roughly ten seconds when idle or whenever after playing with the toners, settings, games etc, as soon as the lights go off, phone resets.
Netmoni test 18 makes the lights stay on, but after same rime (~10 seconds) phone freezes up, only removing batt helps.
Slideshow looks very nice, but phone freezes after last frame totally, the network bar aoppears beside the picture and moves (animates) but that's it, no reaction to any button, again, only removing battery helps.
I'm not sure if it's rom 3 or 4, the guy who flashed it also asked me, he said if it wrong version, the phone won't work at all. But it works almost perfect, except this bug which seems to have to do with the lights (don't fade either, just plain "on" or "off", i guess the bug is within the fader function).
The ringtones RULE!!!! Beat even some of the poly's in my 6610........ great work!
But please, what to do with the phone now? I can't use it anymore, can't flash myself (still no $$ for equipment) and reflashing to original also cost money which i don't have. Can i do anything with my m/f-buys cable? I updated FAID but it didn't change anything.
Please help me, guys... i'm dirt poor at the moment and can't even afford reflash to original, and can't use the phone either because it resets all the time...........
Thanks in advance........
your Thanh

[BOEBOE]

Sorry man, I told you it was beta, and I don't have a 5130...

Seems to be a problem with the Fading lights...

Try a Full Reset...

I really can't help you, since you don't have a flasher equipment.

PS. Is 20 Euro's THAT much?

Look on the MM-99 site.

[Thanh]

Hello again...
yes, 20 EUR is too much for me. Don't laugh, but see on the left side where i am located... Bangkok, Thailand. I earn a fraction of what you earn, to be specific, my all-month salary is precisely 430 EUR. And at present my boyfriend has no job, so this salary has to pay living costs for two, inclusive rent, electricity, phone bills for two persons, water, and food.
I am even struggling with 150 Baht for a simple flashing procedure, yetr i could "free" this amount, i couldn't wait to test your file :)
All i need is another version of that same file, maybe without fading LED's, and someone else who could test it before i have to pay again to get it flashed.
I knew it is a beta, and i don't blame you, i also knew that you did not have a 5130 to test...... that is the risk of beta testing :) But next time i would like someone else who got a 5130 AND a flasher kit, to test it first... as it can't damage the phone, just reflash if it doesn't work, but for me, each try cost 100-150 Baht.
About prices for flasher equipment HERE, a Griffin box (original) cost 15.000 Baht (330 EUR) and a "fake" Griffin still 5.000 (110 EUR). A simple flasher cable (dongle?) is available for 2.500 (55 EUR). Data cables cost between 200-500 Baht depending on phone model, and pop-port cables (fakes!) cost 700, originals 3.990 Baht.
I have a data cable for this 5130, it is m/f-bus with manual switch. It works fine with all applications i have (i use XP pro) but i don't really know, besides sending logos etc, what to do with it.
How can i do such a "Full reset", with which application?
I also found another bug while playing with the phone, if you connect a charger while the phone is off, it powers up automatically and starts it's resetting cycle, but while charging, it goes on for ever, does not keep off after the fifth reset.
Is it possible for you to submit another version of your file, w/o the fading lights? I love all the other features, and would like to keep my phone that way! I love specially the ringtones, the inverted display and the changed fonts.... it look s just cool!
i could eventually do that myself (i've got Nfader) but i don't know how to... never did that before :)
Please assist me a little... Thanks a million!
Kind regards.....
your Thanh

[SmOg]

Hi i edited my 5110 flash with genolite/hexedit/ppmaker and so many editor! The flash work perfectly, but im now unable to edit the pictures!

Ppm edit give me error: "out of memory"
Flasedit unable to save: "close hexeditor"

Here is the flashfile! Can anyone tell me how to edit this flash more? :) I wanna edit the pictures too... Thx!

[BOEBOE]

Hmm,

What is your order for modding flashes?

[SmOg]

uh really dont know now... :) Maybe first the ringtones->blinking text->delete language->genolite(slideshow)->genolite(+menu)->kill chksums->slideedit->hexedit to edit the version number

[BOEBOE]

Here is mine order:

Slideshow+LCD invert+g3n0lite animated bars (g3 1.7)
Slide editing (Slidedit 1.02)
Poodriver (editing animated bars)
PPMmaker (deleting chunks)
Tones and Texts (PPMmanager by Vanov)
Starttone Alarm-Tone, Message tones: MCUTools 1.0
Bitmaps (FLSedit .4)
Batt bars and icons+Changing place of the bars (PPMedit 1.0a)
Fading leds, I use Fade out 400 and Fade in 50 (Nafer 1.41)
Menu (g3nolite 1.7b)
Security code (SecTone)
Kill Chks (genolite 1.7b)

Always kill checksums when you've finished modding.

[SmOg]

I can now edit 3-4 bitmaps and after that flashedit 0.4 give me the hexedit close error...

Isnt it able to "revive" checksum?

[BOEBOE]

No, you can't

Because, if you kill checksums, the 2nd checksum is directed to the 1st checksum,... so you haven't get any checksums anymore...

The point is, kill checksums last, otherwise, you will get CS or phone won't start and this is 100% the case with a 5110.

[SmOg]

Funny but not only checksum killing wont let me to edit anymore the flash with ppmedit. If i have to reserve more space for ppm with genolite, i have to forget more editing... :(


I edited a new 5110 flash and i tried to make blinkig oplogo(the text) eidited so many other thing and last time i killed checksums... It gave me CS all the time (edited the NSP-1 into 5110i with hexedit can it cause CS?)

I gave 41 ringtones with ppmanager...

[BOEBOE]

For imoporting your texts, what prog did you use?
You don't need to reserve some more PPM space with g3. Do it with PPMMaker. Delete some languages..., But I don't think you'll need SO much space for only tones and languages...

No, you can't get your op.logo blinking.

No, changing that won't give you CS. But, if you do this, also think that programs like LogoManager won't recognize your phone.

Yeah, PPMmanager works great!

And kill your chks with genolite!

[SmOg]

I made the flash with your steps! Flash working fully thx!

How many ringones are able to insert? Only 42?

[Harmonieman]

I'm new and want to know what the ProjecT does? my handy is german, so does it work and what will be changed exactly.. can i damage my handy using the Hack?

thx

[BOEBOE]

Originally posted by SmOg
I made the flash with your steps! Flash working fully thx!

How many ringones are able to insert? Only 42?

As many as you can... Mine contains 64 Tones.

[SmOg]

Yeah thx its working well, but i have "crashes" with the ID's. I tried to add 2-3 tones form your projeckt. The phone recognize the "new" tone name, but some of the ids are the same... How can i change the ids?

Thx!

[BOEBOE]

With a program called TCO, you sort them, change all their ID's automaticly, a great prog, it's here somwhere in the forum.

[SmOg]

I cannot search for this prog, because of the too less words.
If u have could u attach it here?

Very thx man! (Thx for all the info u gave me!!) :) ;)

[Thanh]

Hallo :)
(english translation follows)
Du kannst Dein Handy nicht kaputtmachen. Der "Hack" ist eine veraenderte Version der originalen Nokia Software, diese "neue Version" beinhaltet neue Grafiken, neue und mehr Klingeltoene, LED's die langsam an- und ausgehen (wie bei Siemens oder neuen Nokias), neue Anzeigen fuer Batterie-und Netz sowie weitere Details. Ich habe eine Version von diesem "Hack" auf meinem 5130 und es ist KLASSE. Schau's Dir an, wie gesagt, kannst nix kaputtmachen. Bevor du's auf Dein Handy laeds't mach aber ein Backup, bloss um sicher zu gehen.
Freundliche Gruesse aus Bangkok......

English:
You can't damage your phone. The "Hack" is a modified version of the original Nokia software, this new version includes new graphics, new and more ringtones, fading LED's (like Siemens or new Nokia's), new network-and battery graphs and other stuff. I have a version of this "Hack" on my 5130 and it is SUPERB. Have a look at it, as said, you can't damage anything. Just backup your phone before flashing, to be sure.
Kind regards from Bangkok

Thanh

[BOEBOE]

Nobody wants to help me on my 5130 project, so, discontinued.

[Thanh]

Dear BOEBOE.....
please don't stop when you're almost there...... but i know it is too easy to give up.
I am here, willing and waiting to help you but goddammit i am financially unable to do it!! All i need is a f***ing flasher cable, i have all the programs, patchers, files whatever yet can't make a use of it! I am willing and able (good soldering skills!) to build the cable/dongle/whatever myself, but i damn can't get the required IC's here anywhere! Not even for money...... Back in germany i'd open the "Conrad electronics" catalogue, place one call and two days later i got it or the value of a raw egg and a slice of salami. But here..... step into a TV repair shop, don't speak the language and try to tell the guy that you need a specific IC and ask if he can order... standard answer "mai mee" (don't have). I am stuck! My phone don't work! Can you do me one favour... could you find out for me how much cost the IC requred to build a simple DCT-3 flasher cable or dongle, in your country? IC only, i don't worry about diodes or resistors, i can get them here. I can't afford 20 EUR for a cable and i have no credit cards anyway to order online.
Please don't let me hang in the middle of nowhere.....
Please....................
your Thanh

[BOEBOE]

Well, I don't exactly know anymore but it is something between 0.50 and 1.50 €'s I think...

[Thanh]

Friend, if it is only 1.50 EUR, that is 72 Baht, i could afford that..... is there any possibility that you could get one such IC for me and post it to me? You got my e-mail adress. I now don't know what IC exactly it is but i need the one for the simple DCT-3 flasher cable, the schematics are somewhere in the forums here. I would then build the cable and test a million 5130-files for you if i get it to work. I know i can't break the phone by flashing it :)
My luck hangs on 1.50 EUR.... can you believe it? I just can't get it here, i am sure it would be even cheaper............
Kind regards...
Thanh

[BOEBOE]

OK,

But what IC or schematic do you prefer? Original Dejan scheme?

[SmOg]

Dear BOEBOE! Could u tell me where can i find this TCO? I couldnt find it anywhere...

Thx! Keep up to good work! ;)

[BOEBOE]

Hi,

I couldn't find it aswell, searched fir "tco*" , "mixxu"
But nothing.

So, I attached here the latest version for my computer.

[SmOg]

Thx BOEBOE!!
Very very thank you man!! !! !! !! ;)

[SmOg]

I attached ~138 tones into the flashfile. Update ppm, kill faid/mcu.
Flash working perfect, but the phone only see 74 tones.
There is so many palce in the ppm section.

What is the reason that is "only" ;) 74 chooseable?

[ldicdican]

The IC on Dejan 1.04 is 74HC14(but you can also use 74HC04), here in the Phils. it costs Php 20.00/piece., that would be US$ 0.37/piece.

regards,

[BOEBOE]

Originally posted by ldicdican
The IC on Dejan 1.04 is 74HC14(but you can also use 74HC04), here in the Phils. it costs Php 20.00/piece., that would be US$ 0.37/piece.

regards,

Isn't Dejan 1.04 a Box? Based on PIC? Works win WinDls?

And Dejan 1.00b is based on 74HC14? NOrmal flasher that works with Rolis?

Well, could be wrong.

@Sm0g, yes this a problem with Nokia phones, on 3310's yes can only get 57 tones...

[Thanh]

Hello again :)
Dear friends, i just need one IC that allows me to build a ordinary flasher dongle or cable. There are many different schematics out there, based seemingly on different IC's. I want one that allows me to flash a 5130 by using normal .fls files, i have rolis several versions, knok95 and other programs.
A "box" where i would need to program a chip is useless for me as i have absolutely no knowledge of that.
I can easily get resistors, capacitors, diodes here. Trouble is when i need things like IC's, transistors or zener diodes, the guys in the electronic shops (TV repair shops! Here is no electronic parts retailer in Bangkok!) can't understand english, and instead of looking at a paper where i wrote down the type of IC or whatever i need, they come with "no have" as that saves them work.
I have tried desperately to get a ordinary IrDA transceiver chip in order to build a IrDA adaptor for my computer, i got all the other parts, but same here... if the component has more than two "legs" you just can't buy it, they won't let you. Friends of mine (thais) have no clue of electronics so i have nobody who could order it for me here, i am sure they are dirt cheap here, too.
I need only the IC and, if needed (depending on schematics...) transistors. Please let me know if anyone of you would be able to get those parts for me, and eventually mail them to me to Thailand. Please send me an e-mail, i will give you my private adress. I am willing and able to do beta tests for 5130 flashfiles then....... but that's all i can offer as i am really in $ trouble, i don't want to beg, but i need to do something, otherwise i'm totally stuck.
Thanks a hell of a lot........
Kind regards....
Thanh

[Thanh]

Dear BOEBOE.....
I have checked out several (4) schematics, and printed them. They look different but seem to be virtually the same thing, as posted by several users, i trust in the design.
It seems to be the "Dejan" schematic, based on the IC "74 HC 14" plus two diodes, a resistor 4k7 or 10k (which one is better???) and a capacitor 100 nf.
I can get the diodes, capacitor and resistor(s) easily here, such parts cost 10 Baht each (4.2 us cents). I also already have a printer cable (to get the LPT connector) and a serial connector (from a old PC... i'm PC technician). Also i own a data cable type M/F-bus manual switch.
I want to build a "box" which i connect to the LPT port, inside the IC, and on the other end i connect the data cable.
Now, the only thing i am in desperate need for is that "74 HC 14" which i am unable to get here.
Also, i use a solderer with 30 watts, and have no way of creating PCB's, means, i'll have to solder direct to the IC's "legs". Is that sort of IC easy to "kill"? Please advice me.............. i really wish to build this thing and test your files!
Thanks in advance.....
your Thanh

[BOEBOE]

Get the schematic that signed with Dejan Kaljevic. I have it printed with me and the compents are:

LPT connector
2 x 1N4148 diodes
4k7 (4700ohms) resistor
100nanoFarad capacitor (Elektrolytic)
74HC14 IC :(
Nokia Connector

Yes, all IC's are very very easy to kill. Make sure that you use an earthed workbench and connect yourslef with your bench. So the voltage between you, the IC and the workbench are 0. An other thing that you must keep in mind, is that the IC may not get hot. Very important. I suggest that you connect a metal, or something that absorbs the heat. Actually 30W is way to much, o be carefull. I use 10Watts.

Hope this helps you...

[BOEBOE]

And Thanh,

Finally looked at my PM list and got someone who is able to beta-test! He is even from my country Belgium, so...

And how's your IC going?

[ldicdican]

Originally posted by BOEBOE

Yes, all IC's are very very easy to kill.

I disagree with you on this one, 74HC series HAS INTERNAL DIODE CLAMPS TO Vcc AND GROUND TO PROTECT FROM DAMAGE DUE TO STATIC DISCHARGE

I personally assembled 7 working flasher/mbus combi box using this(74HC14) single IC without any use of anti-static devices such as wrist straps,etc. I directly soldered the IC pins on DB25 connector using a 30Watts soldering iron with bare hands and I haven't encountered DAMAGE IC's.

74HC04/14 has 6 inverters inside it. Flasher scheme uses the 4 inverters of the IC and MBUS uses only 1 inverter, so I use only 1 74HC14 IC for my combined Flasher/MBUS box...... just modifiy the scheme :D:D:D

please check the Tech Specification of 74HC14 IC I attached! good luck! :D

[Thanh]

Hello again :)
How's the IC going.... i can't get one here in Bangkok, i need someone who is so kind and can send me one here to Thailand.... anyone? They are so cheap everywhere, but here simply not available!
Please, someone help me out.......
Thanks a lot....
Thanh

[Thanh]

Hello!
Finally i GOT the IC with help of a friend of mine who's PC technician like me, but thai.... my 1st homemade flasher combi box is running and the 5130 re-animated.

@Indicdican
I use your flash file now as BOEBOE's contained a bug which i can't solve. Your file is nice (the network bars even niceer than BOEBOE's) but i prefer his battery graph, and his fonts. Your Graphics ROCK! But the slideshow (nice to put it as a menu item) hangs after 4th frame, only removing battery helps..... and the bitmap for "Net monitor" is sort of screwed up totally, but the netmonitor itself works fine. Also your file produced "Contact Service" and needed to have it's checksums corrected, which i did with G3nolite, and also patched it for inverted display. Congrats for your LED fading, it functions nice, and also the ringtones are great!

@BOEBOE
as you've seen in the other thread, i can now call myself a "member" as i'm behind my very first flashing experience now, and even on a self-made flasher! Now i can't wait to get your next BETA which i'm now able to test :) If there were a combination of your and Indicdican's file (i love your tones and battery bars!!) it would surely stay in my phone for ever.

Both of you, congratulations for your mods, i love them both!! If BOEBOE's next one is same as b4 but w/o the bug i will need a second 5130... as i love the design, tones etc of both.......
Thanks to both of you!
Kindest regards from a happy guy.....
your Thanh

[ldicdican]

thanks for testing my modfile....
slideshow has no bug, it is normat just wait for the phone to restart.

you like some part of my mod, you like some part of boeboe's mod, then YOU SHOULD COMBINE IT THERE, experiment on modifying it and you'll get your PRIZE!

br,

[Thanh]

Hello :)
Well, i am sort of beginning to learn how to modify flashes... i need more time, i yet did not find out how to actually change bitmaps (battery bars!) and also the applicastion i use (PPMedit) kind of "won't let me do it" because after changing something and saving, it is still like before. Also it won't let me find the bitmap for "Net monitor"....... is that hidden? I have no clue of hex editing :)
About "wait for phone to restart"... well, it didn't restart after 12 minutes, so i think it must be some sort of bug....... after the last picture comes, it stays on the screen, the lights stay on, and not any button responds, not even power button. As i said, i have to take off the battery......
Also, when i select any language other than english or automatic, the graphics get screwed same as netmonitor, it looks like the phone tries to combine the original graphic with yours.
And a question: What does "LaUrO" mean? It appears (blinking! Very nice!) when the keypad is locked.
Are you filipino? I wonder why you didn't use an asian flash file... it would be nice when the thai language would be included (it was in the phones original flash file) but it's not a must, i just wonder :)
Also it seems that the battery last longer than before?? With the original flash (using Orange SIM) the phone lost one "bar" each day in pure standby mode, now i got it running since saturday afternoon and lost only one bar so far...... even i did some testings such as sending SMS's, and making few calls to test the audio quality. Congratulations for that mod!
I'll soon get another 5130 (junk... needs to be repaired, battery and LCD issue, same as this one) so there's a good chance that i keep your flash in this one and use the other for BOEBOE's mod :)
Kind regards....
your Thanh

[BOEBOE]

@ lcdicdican,

You won't tell me that normal, the restrating,...

@ Thanh,

You should be able to mod the graphix and battery bars!
About the battery draining, nah, won't use genolite's patch anymore, thtab ecause it takes to much CPU power...

[ldicdican]

Originally posted by Thanh
Hello :)
Well, i am sort of beginning to learn how to modify flashes... i need more time, i yet did not find out how to actually change bitmaps (battery bars!) and also the applicastion i use (PPMedit) kind of "won't let me do it" because after changing something and saving, it is still like before. Also it won't let me find the bitmap for "Net monitor"....... is that hidden? I have no clue of hex editing :)
About "wait for phone to restart"... well, it didn't restart after 12 minutes, so i think it must be some sort of bug....... after the last picture comes, it stays on the screen, the lights stay on, and not any button responds, not even power button. As i said, i have to take off the battery......
Also, when i select any language other than english or automatic, the graphics get screwed same as netmonitor, it looks like the phone tries to combine the original graphic with yours.
And a question: What does "LaUrO" mean? It appears (blinking! Very nice!) when the keypad is locked.
Are you filipino? I wonder why you didn't use an asian flash file... it would be nice when the thai language would be included (it was in the phones original flash file) but it's not a must, i just wonder :)
Also it seems that the battery last longer than before?? With the original flash (using Orange SIM) the phone lost one "bar" each day in pure standby mode, now i got it running since saturday afternoon and lost only one bar so far...... even i did some testings such as sending SMS's, and making few calls to test the audio quality. Congratulations for that mod!
I'll soon get another 5130 (junk... needs to be repaired, battery and LCD issue, same as this one) so there's a good chance that i keep your flash in this one and use the other for BOEBOE's mod :)
Kind regards....
your Thanh

Thanks that you like my mod.....
m a Filipino and the word "LaUrO" is my client's name, you can change it using any PPMManager, export Text chunks, edit the exported chunk using notepad, search for the word "LaUrO" and change it, save the file. From PPMManager, import Text chunk, update PPM's and flash, that's it!
On slideshow hanging, i'm going to make a patcher that will fix that problem, maybe tomorrow, i'll attach it....

[Thanh]

Hello again :)
Well, i keep it as it is..... you know, when i once found something nice, i always keep it. I am not the sort of guy who always got to change things...... I have no problems with LaUrO, it is quite unique, and as i anyway don't use any language but english i have no problem with the graphics either.
In the moment my BF uses that phone as he had to pawn his due to a once again broken car and need for $$ urgently, so we tried if the phone can be duped into using a GSM 900 SIM... well, it works :) The two networks AIS (900) and GSM 1800 are from the same parent company, AIS or SHIN communications, and same as my GSM 1800 auto roams with AIS when out of coverage, also AIS roams with GSM 1800, i only had to manually log into the network once and change back to auto select, now it works just nice :)
Don't hurry with that patch, i won't flash again before i have his 7250 back from the pawn shop :) But thanks a lot!
Keep up the good work.......
Kind regards.....
your Thanh

[BOEBOE]

Originally posted by ldicdican


Thanks that you like my mod.....
m a Filipino and the word "LaUrO" is my client's name, you can change it using any PPMManager, export Text chunks, edit the exported chunk using notepad, search for the word "LaUrO" and change it, save the file. From PPMManager, import Text chunk, update PPM's and flash, that's it!
On slideshow hanging, i'm going to make a patcher that will fix that problem, maybe tomorrow, i'll attach it....

So, Artangel ;)

Ur you making also a patch for 5110?

[ldicdican]

no, i'm not Artangel, he is my friend here in the Philippines..... i am sHoEsTRiNG at TAPGSM.....

[BOEBOE]

:)

But you're also very great at making patchers...

But, i think it's now useless, as g3g0 is making one in his g3n0lite.

[ldicdican]

well, i hope g3gg0 is STILL developing it(g3n0lite 2.0) :D

[BOEBOE]

Oh dear,

I HOPE SOOOOOOO

[ldicdican]

Originally posted by BOEBOE
Oh dear,

I HOPE SOOOOOOO

i hope g3gg0 will still release it for FREE!
but i don't expect it that much!

More expectations, more frustration......

do it urself, and u'll be rewarded! :D

best regards!