PDA

View Full Version : ****PCB FOR Terminator****



nonu_don
19-03-2003, 05:33 AM
Hi, is somebody having a PCB design for making the terminator dongle. if yes then please share it with me

Single layered PCB is appriciated.

Naman
[email protected]

nonu_don
19-03-2003, 06:14 AM
hi, i got one from gsmhack-crew, it is single layered but the prob with this design is that it does not uses db25 at both sides. just uses simple wires solded to pcb to connect pc and phone. please get me some better one which have some universal sockets.

Naman
attaching the pcb

Wu-Tao
19-03-2003, 08:26 PM
Hi, but this pcb not have DC 5v, and where is the .hex for pic???

Thanks, and sorry for my englis

nonu_don
20-03-2003, 03:29 AM
the terminator dongle get +5 from the phone connector ( pin 9 and 22). see sony-eric-cable.pdf for more details.

Naman

Wu-Tao
20-03-2003, 01:18 PM
Thanks but where is the .hex working 100% for the pic 16F876-20/SP????

Best regards.

nonu_don
20-03-2003, 01:43 PM
Originally posted by Wu-Tao
Thanks but where is the .hex working 100% for the pic 16F876-20/SP????

Best regards.

i have 2 type of hex for this, but none tested by me.
attaching

Naman

Ps. try searching old posts before asking...

zlavo
21-03-2003, 08:56 AM
This two files is the same, but what must be other settings: fusses,code protect, ID. I know that oscilator setting must be "HS" for this quartz. I think ID is important. I made this dohgle,
but soft reply "dongle not find". Any help?

DaveGSM82
22-03-2003, 02:34 PM
can anyone say whether this thing actualy works?

I have two T68's that I need to unlock and I need I need to know before I build one.

Dave.

nonu_don
22-03-2003, 07:12 PM
just got my terminator dongle ready,,, and yes it works,...
well i have not unlocked a phone yet but, donge is detected.

Naman

Wu-Tao
22-03-2003, 09:27 PM
You can explain with what files have planned it how have configured the programmer???



Thanks.

nonu_don
23-03-2003, 04:01 AM
i am attching the hex as well as the pcb which i used to build the dongle.

Naman
dont distub the default config of this hex file in icprog, just load the file and press program all.

bossgrp
23-03-2003, 11:52 AM
sim card use for what function and what 's bin,hex file to program sim card

zlavo
24-03-2003, 10:16 AM
I think it is not free in this moment:
mad:

Alinus
24-03-2003, 03:35 PM
u can bet that's not for free....

Wu-Tao
08-04-2003, 04:38 PM
This scheme not working, the message with terminator 1.3, 1.6 & 1.8 is: dongle not find:mad: :mad:

nonu_don
08-04-2003, 05:32 PM
sorry dude, pcb working,,, as far as my dongle is detected with same pcb.

used this attached hex only

with others dongle n/a.

Naman
please post ur reply,,, did it worked for u???

Wu-Tao
08-04-2003, 08:01 PM
With what software recognizes it you? ??, because I have done two times the pcb and I have reviewed it carefully, but continues without functioning. Certainly the hex that utilize is that.

stavygsm
08-04-2003, 09:11 PM
It working 100% for programming 16F876_20 .I test it and work:D

Wu-Tao
09-04-2003, 07:54 AM
Je, jejejeje, did not mean that had problems to plan the pic, the soft that ask is the terminator, the version with the one that recognizes the dongle.

Thanks.

nonu_don
09-04-2003, 09:36 AM
mine works with every version,, ie term 1.1, 1.2, 1.3, 1.6, 1.8, 2.0, Cooler 1.0

Naman

Wu-Tao
10-04-2003, 07:19 PM
A doubt, is necessary to put the smartcard? ???, because it do not I have position, perhaps be therefore for which does not function? ???

nonu_don
11-04-2003, 02:45 AM
no u dont have to place the smartcard for making a terminator dongle. It is required when u r making a DIC dongle. You dont even need the 74HC74 for terminator. it is also for DIV...

NAman

Wu-Tao
11-04-2003, 01:23 PM
Then the 74HC74 does not do lack for the dongle terminator? ???, not one must puncture it? ??? or what..

fhwong
20-04-2003, 05:23 PM
My Dongle ERROR: 0101

davie
02-11-2003, 08:57 PM
Hi!

stavygsm' s icprog.zip have virus win95 Dupator!!!!!!!!!!!!!!!!!!!!!

Regards.

pm03
09-11-2003, 01:37 AM
hi,
here is worked sheme and pcb

the-equinoxe
07-01-2004, 05:23 PM
Here is the asembly file for the terminator dongle
(decompiled from original dongle!)

cam_id
28-01-2004, 09:50 AM
!!!!!!!!!!!!!!WARNING!!!!!!!!!!!!!!

stavygsm
YOUR file icprog.zip HAS w32/dupator virus

Pejo
30-01-2004, 11:13 PM
Try here:

Terminator (https://www.handango.com/AdminProductDetailView.jsp?siteId=1&jid=FAF6A4XBAE8C99X8727136F8FB2AEC7D&productId=98612&platformId=1&productType=2)

rumensat
05-12-2004, 11:00 AM
please can somebody post here HEX file for dct4 dongle with PIC16f876?