3310 no network after unlocking

[simba1805]

i got a 3310 (ver 4.24) that i've unlocked with rolis 1.8 , but after introducing simcard and chossing network coresponding to the simcard manualy , i got message (access denied), and trying the same simcard into another phone it works correctly .

whats going on ????

[emul8d]

What button did you press on rolis? "SP"?
You must press SP, then see if the display is
MCC+MNC = 00101 = open
GID1 = 00000 = open
GID2 = 00000 = open
MSIN = 0000000 = open

then check MCC+MNC then click CLOSED to make you phone Openline else if you'll lock it to a certain network, input the correct MCC+MNC ID supplied by your network (each network has different codes)

[simba1805]

thanks for your reply, but, when i said that i didn't understand what's going on , i mean that the rolis software show me that all the locks are open , that's what making me wonder , i think that there's something locked inside that couldn't be showed by the rolis software, i've tried also to flash it with a diferent firmware and a virgin eeprom and i've updated the fai with rolis but same thing it detect the network but don't give access though that all locks are opende by rolis

[emul8d]

Originally posted by simba1805
thanks for your reply, but, when i said that i didn't understand what's going on , i mean that the rolis software show me that all the locks are open , that's what making me wonder , i think that there's something locked inside that couldn't be showed by the rolis software, i've tried also to flash it with a diferent firmware and a virgin eeprom and i've updated the fai with rolis but same thing it detect the network but don't give access though that all locks are opende by rolis

Full flash the fone with a new version, faid, SP,faid, SFR, and try that again!

Else your fone has a hardware falilure, you must try wintesla to test your phone for problems

else try this

http://nokiafree.org/forums/attachment.php?s=&postid=103777

[simba1805]

thanks alot for your reply concerning the solution for hardware failure , but thaugh that the network is detected , i don't think that it's a hardware failure , but i'm going to use wintesla for testing it

thanks

[chunkhead]

Use Knok95, quickset the faid, reset user factory settings, reset full factory settings, open reset SP lock, quickset faid again! Let phone start up with simcard, phone will have no signal, it will reset itself after 10-15 secs and phone will be fine!;)