PDA

View Full Version : how to open up 8910



bisdak
26-04-2003, 04:39 AM
people please help me in this because the phone problem is the mic, flashed the phone many times to upgrade it in cheap flasher and griffin both failed, i think its a hardware prob...

pls post any link where i can find a tutorial,
help is needed,
bisdak:D

markchee
04-05-2003, 07:25 PM
Rigth the mic is stored inside the sliding cover with ribbon connected from the phones.They include mic & vibrator.
1)Remove the batt. cover
2)Remove the nokia logo behide the slide,(silver plate)push upwards to remove.
3)Unscrew the 2 T6 screw,which is holding the U shape metal,silver colour.
4)Now disconnect the ribbon from main PCB.
5)Becareful the spring.Unhook the spring.

now phone should be in two pieces.Below the slide cover theres two screw,remove it.

Now the ribbon should be dismantled at this point,check the mic with multi meter.

Don't try this if u are not in good hand on mechanical parts,my advice go look for service,play safe.Good luck,mark

ceanth
20-11-2004, 12:39 AM
could someone tell me what to check on the mic with the multimeter? I take it a multimeter is one of those things which checks things like current and volts?

mairo22
20-11-2004, 09:54 PM
could someone tell me what to check on the mic with the multimeter? I take it a multimeter is one of those things which checks things like current and volts?


Check the microphone resistance. This kind of mic has to be some kilo-ohms.