Continuous vibrating

[jumper]

Hello

I changed some ringtones in the flash file and after flashing it into phone I noticed that when the phone is ringing withe the new tone the vibrating alarm is continuous.
What should I do to get the vibration working normally with these tones, like it follows the melody with original tones?

[chunkhead]

Youv'e made a mistake somewhere in changing the flash! Start again and make sure you understand all the options of the program your using to change the tones! Some will have a function to modify the buzzer in the tone!;)

[Romeo26222]

put 0AFE at the last to stop vibrating then 0BFF to stop ring!!!
That's it!!!

[jumper]

this takes the vibration off but how can I add some pauses between vibrations so that when this tone is ringing, then the phone vibrates, then dont and then vibrates again?

[liteFun]

use 0A 01 somenotes here 0A FE to make it vibrate only some notes.



...again i'm asking myself: is it really so hard to use that search...

[HAMMER]

I have the same problem.

I used flashtone - the vibration was right, but the ringtone was damaged.

with PPM Edit 1.0a
I tried to use 0A 01 and 0A FE in PPM Edit 1.0a -HEX DATA, then clicked update. The tone was damaged.

I d like to use this to sms alert (3315(3310) personal alert)

nokring format:

SMS:d=16,o=6,b=160,l=15:c,d,d#,32f#,g,p,c,8p,8c,p,c,d,d#,32f#,g,p,c,8p,8c

PPM edit "tones":

0C 6c 0C 6d 0C 6d# 06 6f# 0C 6g 0C p 0C 6c
18 p 18 6c 0C p 0C 6c 0C 6d 0C 6d# 06 6f#
0C 6g 0C p 0C 6c 18 p 18 6c


PPM Edit - HEX Data:

0A 01 96 0C 98 0C 99 0C 9C 06 9D 0C 40 0C 96 0C 40 18 96 18
0A 0A 40 0C 07 0B FF

-----

I tried to modity Hex data:

0A 01 96 0C 98 0C 99 0C 9C 06 9D 0C 0A FE 40 0C 96 0C 40 18
96 0A 01 18 0A 0A 40 0C 0A FE 07 0B FF

nokring:

SMS:d=16,o=6,b=160,l=15:c,d,d#,32f#,g,p,c,8p,32c

tones:

0C 6c 0C 6d 0C 6d# 06 6f# 0C 6g 0C p 0C 6C
18 p 0A 6C


what's wrong? how do u change tones? what kind of software?
please help me. I was searching and reading for months, but I didn't figure it. thanks.

[logyan7]

I have the same problem.

I used flashtone - the vibration was right, but the ringtone was damaged.

with PPM Edit 1.0a
I tried to use 0A 01 and 0A FE in PPM Edit 1.0a -HEX DATA, then clicked update. The tone was damaged.

I d like to use this to sms alert (3315(3310) personal alert)

nokring format:

SMS:d=16,o=6,b=160,l=15:c,d,d#,32f#,g,p,c,8p,8c,p,c,d,d#,32f#,g,p,c,8p,8c

PPM edit "tones":

0C 6c 0C 6d 0C 6d# 06 6f# 0C 6g 0C p 0C 6c
18 p 18 6c 0C p 0C 6c 0C 6d 0C 6d# 06 6f#
0C 6g 0C p 0C 6c 18 p 18 6c


PPM Edit - HEX Data:

0A 01 96 0C 98 0C 99 0C 9C 06 9D 0C 40 0C 96 0C 40 18 96 18
0A 0A 40 0C 07 0B FF

-----

I tried to modity Hex data:

0A 01 96 0C 98 0C 99 0C 9C 06 9D 0C 0A FE 40 0C 96 0C 40 18
96 0A 01 18 0A 0A 40 0C 0A FE 07 0B FF

nokring:

SMS:d=16,o=6,b=160,l=15:c,d,d#,32f#,g,p,c,8p,32c

tones:

0C 6c 0C 6d 0C 6d# 06 6f# 0C 6g 0C p 0C 6C
18 p 0A 6C


what's wrong? how do u change tones? what kind of software?
please help me. I was searching and reading for months, but I didn't figure it. thanks.
----------------------------------------------------------------------
try the new flashtone version 2.10. bugs fix

[logyan7]

I have the same problem.

I used flashtone - the vibration was right, but the ringtone was damaged.

with PPM Edit 1.0a
I tried to use 0A 01 and 0A FE in PPM Edit 1.0a -HEX DATA, then clicked update. The tone was damaged.

I d like to use this to sms alert (3315(3310) personal alert)

nokring format:

SMS:d=16,o=6,b=160,l=15:c,d,d#,32f#,g,p,c,8p,8c,p,c,d,d#,32f#,g,p,c,8p,8c

PPM edit "tones":

0C 6c 0C 6d 0C 6d# 06 6f# 0C 6g 0C p 0C 6c
18 p 18 6c 0C p 0C 6c 0C 6d 0C 6d# 06 6f#
0C 6g 0C p 0C 6c 18 p 18 6c


PPM Edit - HEX Data:

0A 01 96 0C 98 0C 99 0C 9C 06 9D 0C 40 0C 96 0C 40 18 96 18
0A 0A 40 0C 07 0B FF

-----

I tried to modity Hex data:

0A 01 96 0C 98 0C 99 0C 9C 06 9D 0C 0A FE 40 0C 96 0C 40 18
96 0A 01 18 0A 0A 40 0C 0A FE 07 0B FF

nokring:

SMS:d=16,o=6,b=160,l=15:c,d,d#,32f#,g,p,c,8p,32c

tones:

0C 6c 0C 6d 0C 6d# 06 6f# 0C 6g 0C p 0C 6C
18 p 0A 6C


what's wrong? how do u change tones? what kind of software?
please help me. I was searching and reading for months, but I didn't figure it. thanks.
------------------------------

maybe ur using flashtone 2.09. try using 2.10
hope this helps

[HAMMER]

thanks, but I used the v2.10 :-(