3310 problem?!

[sergo_zmeia]

Hi guis!
regards to all of You posting this great forul!
Now at the point: I dropped my nokia 3310 and now it is dead.
What I mean: no power on, no charging massage, I cant read it's info no matter what software I use...After connecting it to a dc power supply and a thermocouple to simulate the battery somthing about 30mA I saw at the indicator is it a charging IC problem..any one any ideas?
Please help!
Regards!

[hppeter]

Take a Torx 6 Tool and disassemble the phone, look if any part is broken.
If any part is broken, replace it.
Look if all contacs are O.K.. Descryption is here: http://www.inside-gsm.com/Nokia/Nokia_3310/Inside_Nokia_3310/Component_side_description_Nok/component_side_description_nok.html


Most Nokias have a Fuse in the charging-circut of the phone. Have a look to the Power-Circut-Diagramm in the Service-Manual, you can find the Service Manual for the a lot of Nokia phones here http://www.gsmzone.co.uk/nokia_service_manuals.html

Reassemble and Hope.

[sergo_zmeia]

Ok..i light it up but there is contact sevice on the screen..after test with Eeprom tools the result is:
MCU interface test failed
Eeprom Tune Checksum test Failed...
I can't read Eeprom wiht noktool..it shows me mistake at adress
0xA00000...Do i need a vergin eeprom?
Please help!
Regards!

[hppeter]

Take a flasher an write a Fullbackup (MCU, PPM and EEPROM) to your phone. All you need and some Full-Flash-Files can you find

here: http://nkflash.altervista.org/flash.htm
or here: http://members.chello.at/willibald/Logs/update_files.htm

[sergo_zmeia]

Thanks for the tips..
I already did that..using Windls 2.7...But there is no result..I'l search for full flash and will try again..how about to rekommend me the software..rolis flasher..or knok or dark..is there any diference?
Thanks one more time!
Regards!

[BOEBOE]

Hello, Download MCU and PPM from this site: http://www.thony.xtr.at/dd69/dct3

Convert them to Deajn format with the prog I've attached.

Update Checksusms with Genolte.

Flash with Rolis.
Flah Virgin EEPROM with rolis: can be found here: http://nokiafree.org/forums/software.php?u=&pathext=Nokia/eeprom/

Turn phone on, and update FAID with NokTools.

[sergo_zmeia]

Hi guis!
Sorry I didnt write so much time but there was some problems around me...no everithing is ok..
Thanks for replies! I fix it up everithing i cool now!
Only one more thing i cant fix IMEI?! Knok says can not analize phone..bla bla...Any suggestions...
Thanks one more time!
Regards!

[BOEBOE]

Use NokTools by Rlois 1.9 (001), works on every PC.

[sergo_zmeia]

Thaks for replay BOEBOE...but how to change IMEI with noktool..
I dont know...please help..
Regards!

[hppeter]

Change IMEI with Knok Phoenix

http://members.v3space.com/napalm/nokia/software/software.htm

[BOEBOE]

You can do that by just typing the IMEI in the textbox and click change.

[sergo_zmeia]

Hi guys! Thanks for replais!
I fix it up....cable problem...now every think i ok
Thanks one more time!
Regards!