PDA

View Full Version : flasher tool request



Oby One
20-05-2003, 11:46 PM
Hi....
I have a 3210 and I want to save my flash before I start modding :)
What tool does work in win xp ? with witch can I save my flash and write anonter one ?

Noodlebut
21-05-2003, 07:35 AM
go to the download section of these forums, there is plenty tools around...

you can always use the search button.

Search for Rolis or Knok. they seem to be the best ones out.

Oby One
21-05-2003, 09:03 AM
ok but is saves a .bin with 128 k in size
and my flashes .fls are 2 Mb ....

and in option read flash image form ... to .... 3210 does not apear ...
as for knok it does not have a shell and I am afraid not to do someting stupid that can destroy my phone
I understand that I have not only to save my fls before puting a new one but also to "patch" the new flash I want to write ?
and to unlock it and to do somethig else... Am I wrong ?

mg70brz
21-05-2003, 05:33 PM
use rolis tool 4.79 , its more security on xp,and use patch with this..... for not errors in xp.........
http://www.gsmschwantz.com/page.htm

Oby One
22-05-2003, 12:35 AM
well I am not stupid when I tell you that every software i have tryed didn't worked
Look in the picture below and see that rolis tool 4.79 DOEsn't work on win xp....

as for knok95 I don;t think it can work on win xp
it says


FLS1_GetFlashParameters : parameters found NSE-8(3210) - DCT3BT2.TIA
FLS1_PreparePhone : found flashing params NSE-8(0) - 61, 06
FLS1_ConfigurateBootstrapDCT3 : checksum is 4E8B
FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
FLE5_DirectInitialiseBootstrapDCT3 : executing bootstrap
FLE5_DirectInitialiseBootstrapDCT3 : preparing reading phone RAM
FLE5_DirectInitialiseBootstrapDCT3 : executing reading phone RAM
Cannot prepare phone

Other software can connect to my phone without any problem

So once again
What do I use to make a full back up of my phone (and works on win xp ) ?

mg70brz
22-05-2003, 01:21 AM
please ,right click in rolis 4.79 executable ,choose properties,compatibility ,compatibility mode ,click on first dialog box,and mark as windows98/me , apply , ok . enter........

Oby One
22-05-2003, 10:10 AM
Wel... u can imagine that I did that the first time
But it still doesn't work
It starts and when I press the read button it hangs... and it stays in that state until I press escape
In the picture below it stood for about 26 minutes and did nothing
I think it is the way he tryes to acces com1 witch differs form 98 to xp
I am sorry to say but this program doesn't work on xp
Other work ... like logo manager but I found none that can make a fulll back up .fls

Do u have any other programs ?

killer04
22-05-2003, 02:45 PM
Just press power button on your phone shortly!!!!!!Do you have userport??

Oby One
22-05-2003, 08:50 PM
I didn't have a user port, but I think that is the thing I needed to run all the programs that didn't work on xp
I shall try it first thing in the morning :) now I have one exam to attend :)

thx :cool:

Oby One
23-05-2003, 09:55 PM
Ok now the userport equation
I didn't know what address coresponds to Com1 so I have made all 9 combinations
You will see the errors on the image below
I think that I must really put win 98 if I want to do this

Oby One
23-05-2003, 09:58 PM
Logo manager works ok so I don;t think there is a problem with the cable.....
Mabye with the userport

Oby One
23-05-2003, 10:31 PM
I went to my Device Manager and see that Com 1 uses 03F8-03FF

so now exactly what do I put in User port on_left/on_right ?

mrpen
29-05-2003, 11:22 PM
well oby one it dont look like you know shit i use knok95 and i works and rolis tool 4.79 on win XP they both work 100% i used them to convert my m8s 3310 to 3315 and that works 100% so u dont know what your doing and im not using userport either so tough luck i guess hahahahaha lol:D

chunkhead
30-05-2003, 01:52 AM
Your mad! Your all bloody MAD! You have a F\Mbus cable!!! This CANNOT be used to flash or read phones!!! You need a Flasher cable!!! The Flasher cable connects to the LPT port, and that's what Userport works with!!! Read the NEWBIE section!!!:mad:

chunkhead
30-05-2003, 01:57 AM
@mrpen:

Don't be such a smart arse!!! Correct me if i'm wrong, but you are also a newbie!!! You will need help someday, and your name will be remembered for such comments and help will be very little!!!

@Oby one:

What I said should rectify your prediciment!!!;)

Oby One
30-05-2003, 06:56 AM
I need it for may school project but I did it without the phone :(
Anyway I shall start to look for a flasher cable to see how it looks and how I can make it ....
I think it connects to the same port on my phone
thx for the tip....

mrpen
30-05-2003, 04:01 PM
yea a newbie to this site and you can flash phones without userport on win XP i have done it

mrpen
30-05-2003, 04:04 PM
And the only reson your a Veteran is coz you have made lots of posts init if i sat at my computer all day posting stuff i would also be a Veteran

cjard
30-05-2003, 07:19 PM
Originally posted by Oby One
Logo manager works ok so I don;t think there is a problem with the cable.....
Mabye with the userport

maybe noone has actually told this guy:

LOGOMANAGER USES MBUS CABLE

ROLIS USES FLASH CABLE

FLASH CABLE != MBUS CABLE

go buy a flash cable..

cjard
30-05-2003, 07:20 PM
Originally posted by chunkhead
Your mad! Your all bloody MAD! You have a F\Mbus cable!!! This CANNOT be used to flash or read phones!!! You need a Flasher cable!!! The Flasher cable connects to the LPT port, and that's what Userport works with!!! Read the NEWBIE section!!!:mad:

oh look.. heh.. chunkhead got the answer before me :)

ps; on XP, rolis was written for xp, needs NO userport, nor compatibilty.. apparently!

http://blight.dk

cjard
30-05-2003, 07:22 PM
Originally posted by mrpen
i used them to convert my m8s 3310 to 3315

dickhead. a f/mbus cable is used for this, not a flash cable.. the guy wants to kno why his flashing software doesnt work,a nd you go blathering on about how you are so leet with an mbus cable, and that _he_ is the one that dont know shit..

heh

mrpen
30-05-2003, 09:35 PM
well c**t cheese i used a flasher cable ok and it worked fine not f/mbus

cjard
31-05-2003, 11:11 AM
what a load of bollocks youre talking.. no software on the scene uses a flash cable to do 3310->3315..

i really do think that you dont actually know what the difference between a flash and an mbus cable is.. note that the f in f/mbus doesnt stand for flash.. bozo

mrpen
31-05-2003, 10:29 PM
i know that you fick c**t a flaster cable goes in the LPT port and a f/mbus cable goes in the com port

NokDoc
01-06-2003, 10:29 PM
Hello, :(

Can we go do normal again?

Pointing out Ur own opinion is ok.

But only in a nice way, it is allowed.

No need to keep dragging to one another.

U spoil the forum fun other readers too.

Thanks.


Mr. Oby One,

All the time I was here on the forum, I read userport was required for XP.

Therefore I think it is.

NokDoc

Oby One
01-06-2003, 10:32 PM
I've search everywere and didn't find to buy a flash cable.....
I guess I have to build one my self
I'll search the forum for some help

devolution
02-06-2003, 02:12 AM
You can buy a flasher cable here fairly Cheep http://www.cellphoneshop.net/gensym-218.html

I bought both my cables here and have had no problems with them:)
HOPE THIS HELPS Oby One

chunkhead
02-06-2003, 04:02 AM
@Obi One: If you search in google, you will find many sites selling Flash cables, and it will do no harm to have userport running on your system, cos if you have a problem, you can't blame it on not having it!!!;)

@mrpen: Dear sir, I'm afraid that you have now shot yourself in the foot! Not only have you insulted a newbie, but you have also insulted myself and cjard! I have no need to explain myself to you, I happen to be very helpful to Newbies as I was one myself a long time ago, and as for cjard, he may not have a huge post number, but I for one, respect his opinions, solutions and help!!! This post has now had close to 400 hits, which will include most of the Veterans on the forum, like NokDoc, and I think you will now find it very hard to get any help, respect or support from these parties!!!

Oby One
02-06-2003, 12:03 PM
Sorry but I can't buy it from there.... I am from Romania .... so I have to make one my self....
I have a lot of exams now so I don't have a lot of time... but I will make it ;)

mrpen
02-06-2003, 01:40 PM
oby one you can buy a flasher cable from here http://www.fonefunshop.co.uk/Unlocking/nokiaunlocker.htm they do worldwide delevery :cool:

Oby One
02-06-2003, 04:31 PM
And maybe not :)
It is to expensive for me at >29 $
The mbus cable I have cost me about 7-8 $ but the sum of all components doesn't go above 3.4$
Same for the Flasher Cable....It won;t cost me much to build one.... Only if I can find the phone connector with 6 pins...

Hmmm I wonder if I can modify the one I have and insert two more pins.... hmmm....

NokDoc
02-06-2003, 07:03 PM
Hi,

For both flashing or mbus/fbus is only 4 pins required.

So U can use the one connector U have.

NokDoc

Oby One
02-06-2003, 07:57 PM
only four ?

1.Vcc
2.B-temp
3.F_bus tx
4.f_bus rx
5.Mbus
6.Gnd

NokDoc
02-06-2003, 08:00 PM
Hi,

Yes, 2-5.

NokDoc

Railey
04-06-2003, 07:14 AM
Im new here..
just wanna know what does flashing means?!
Is it like reformatting your nokia software?!!
then installing a new nokia Software version..
thanks!

kootp
04-06-2003, 01:21 PM
Sorry but I can't buy it from there.... I am from Romania .... so I have to make one my self....
I have a lot of exams now so I don't have a lot of time... but I will make it

Hey mate, there is a Guy called Gobi from Romania. I bought a Flasher from him. Nice guy.

His website is www.gsmtools.ro

Contact details

E-mail: [email protected],

ICQ:30399404,

Tel: +40744333934



I think this will help.


To ALL MEMBERS

Learn to respect other people & Don't think 400 posting are not just posting…Chunkhead is a very helpful guy.

Oby One
05-06-2003, 09:00 AM
Yeaa.. perfect ... I'll send him a mail right away.. :)
thx for the tip

Railey: in my opinion flashing is the the precedure with witch you erase the eeprom of your phone and write down a new one
In the eeprom is the code your phone needs to work ....+ settings stuff like that

I wonder : 1 . the flashing can be done if the first flash went wrong .... and the phone has no soft ( if the writing proces is hardware based)
2.if the flashing can be done through Ir ( in 7110)

Oby One
19-06-2003, 03:48 AM
:( unfortunately I have to sold my 3210 and buy a 7110 at almost the same price
It has the lastest version 5.01
It is a very beautifull phone...
But
1.Can I add a new game ?
2.what does mean 3v technology ?
3.can I do something hmm... new with this phone ? like some modding ?
In about 2 weeks I'll be free

devolution
19-06-2003, 08:32 AM
Hi obi one, 3v technology is in any electronic device that runs off 3.0 to 3.6volts, as for your other questions you might want to look in the catagory concerning your new phone:). good luck.

Oby One
19-06-2003, 11:51 AM
I belive that the other technology is 5 v ....

I'll try to run a full scan on the 71xx section capitan :)
Selecting full level 3 diagnostics on main sensor array :)