Here! Fading ligths. Step by step.

[adrianoliveira]

First, very thanks Lexx, Nokiacrazi, Asgaardro and Boeboe.

This text is about how I put fading ligths in my 3310.
I´m not response if you damage your phone.

1- Put out the SIM CARD, Phone turn OFF and conect the flash cable.

2- With Knok95: Click menu READ > READ FULLFLASH AND STORE AS FLS. Press fast power on in the phone (not is necessary turn ON the phone). If the read don't start, check the cable.
IMPORTANT: MAKE A COPY OF THIS FILE.

3- After read the fullflash, run NFADER 1.4, click SELECT A FILE and open the file (your fullflash) saved by KNOK (search in KNOK folder). Click APPLY and save a new file.

4- Back to KNOK. Click menu WRITE > WRITE FLS FLASH FILE TO PHONE. Open the file saved by NFADER. Press fast power on.

5- Click menu MISC > EMULATE COMMUNICATION FROM FLS FILE

6- Click menu CHECK AND FIX > CHECK AND FIX CHECKSUMS

7- Turn ON the phone. If the phone don't start, repeat the step 3 to 7 (if no solution, go back original file and no fading ligths).

8- If the phone start, conect Mbus cable, phone ON, click in menu PHONE SETTINGS > SET FAID click OK.

9-:D

[bobl]

Nice post, just interested if it can be done to the 3410:

I guess Nfader simply patches the flash file at a certaint point, so this could be done to the 3410 flash as well?

Then you can convert to deadfaid and then reup the flash?

Bob

[Sinister Frog]

talk about taking the long way!
with rolis u can do it in about 3 steps!