PDA

View Full Version : 3210 datacable problem



archie42
16-05-2002, 03:09 PM
My datacable for 3210 works fine with Nokia`s logomanager, but not with knok22 or Rolis flasher or eeprom-tools. These software does not find a mobile phone at all.
The datacable has 4 pins on the mobile side and is connected to the com port of the PC.

What can I do ?
Please help!

archie42

Zzzooommm
16-05-2002, 03:49 PM
Try to use this Nokia Tool by jordik (http://www.schwantz.hpg.com.br/zip/nokia_tool_303.zip)

This soft work's with flasher conversor to Mbus, normal Mbus, M/Fbus, etc etc.

archie42
16-05-2002, 06:06 PM
Unfortunatedly this program does not work. When I try to run it, I get the message:
"File MSCOMM32.OCX not registered properly".
What does that mean?
By the way: My 3210 has SW 6.0.
archie42

Zzzooommm
17-05-2002, 12:00 AM
Just copy this file to C:\windows\system

archie42
17-05-2002, 09:05 AM
Thanks for the file! Now I was successfull at last.

Zzzooommm
17-05-2002, 02:28 PM
;)

benchowmein
19-05-2002, 12:35 AM
i have also had problems with my datacable, as it will only work with logomanager, ive even tried Nokia Tools by Jordik. but still no luck as any1 out there got any ideas. please help, as im wanting to update my 3210 to v6

CarloOchotorena
31-05-2002, 08:41 AM
Some data cables really don't work for some software especially if they are dual (no switches). If the software requires MBUS then try blocking the FBUS pin with a piece of paper or something non-conductive. Do the opposite for FBUS. There are a lot of info on the pinning on the web so you should know. Hope this solves the problems.

benchowmein
31-05-2002, 07:19 PM
cheers! i'll try that