PDA

View Full Version : Dead 3410



babsy
30-05-2003, 01:48 PM
This phone originally had water damage after sorting this problem
the phone is now completely dead will not charge and will not allow me to flash it anybody got any idea's any help will be appreciated thanks
Babs:confused:

Anybody know what kind of resistance reading should be obtained between the on/off switch, because i'm getting weird readings, when the switch is pressed ive checked along side a working 3310 and the reading is dead short when the on/off swich is pressed could the on/off switch be at fault, and is it common for the switch to break down cheer's
Bab's

obeids
31-05-2003, 09:21 PM
Hi

Listen up buddy! First of all i need to know what it says when u try to flash it? 2nd i need to know what readings does your meter give you when you press the power button. 3rd What software are u using for flashing.

My Advice: First clean the board and reflow it. there after clean the contact points of the battery connector and the connetors on the phone.

2nd: leave lcd board out and try to flash.

3rd: Flash using Rolis 4.78

4th: check your power switch. it should only give a reading when Pressed. The power switch has four pins: 2 right 2 left. (the ones opposite one another are the same. check two next to one another.

If you still require further assistance please email me at [email protected]

I so far have recovered many phone like this.!!|


:rolleyes: