9110/i flashing help needed.

[liteFun]

i have nokia 9110 with oldest possible phone & pda versions.
i want to upgrade to newest ones.

if i short pins 15-16 to get it in relink-mode, it's just like normal, no indicators about relink-mode (i read it should say "relink-mode enabled").

and for the cable, should there be only mbus & gnd connected when using for flashing, no fbus rx & tx?

how can mbus be used when eg. logomanager doesn't recognise there's 9110?
(just want to set logo and activate netmonitor..)

and yes, i tried to read flash from phone with rolis & knokphoenix using flasher cable and my 9110 lead i made. (it has mbus&fbus connected..)

[lonegunman]

Check on my site, look for file called 9110 total upgrade, it has all the info you need.

[liteFun]

thanks a lot.
i'll check that file as soon as possible.

[liteFun]

right. i already had those same files, as Nokia_9110_MCU_WinTesla.zip.



hold phone up right pin 1 is to the left.
connect pin 15-16.
Connect battery.
On screen (top left in small text) should say
'relink mode enabled'
can now flash as 5110.


that's what i have done, phone doesn't say about relink, pda neither.

rolis can't read because flash type 0 or something.

and how about the cable? i had fbus rx&tx, mbus, gnd connected -> didn't work, and now same when only mbus & gnd.

and why no text about relink mode when pins 15 & 16 connected?
something broken?

[lonegunman]

Make sure it is pins (15-16) nearest the simcard holder not the other end, it's been some time since I have done this but it does work.

You must have relink mode on the screen for flashing the phone part.

[liteFun]

i'm thinking there is something broken.
just normal pda when connecting 15-16 and put battery back.
i have not opened that phone, maybe it's time to open and check is it ok.

[FreeSpirit]

i have a pic of my 9110 with his Mbus plz if some 1 can edit the pic and show me what to do.........

[FreeSpirit]

Some 1 can help ?!?!?!?!?!?!?!?!

[lonegunman]

Told you it had been sometime since I had done one, try the last 2 pad on the other end not the simcard end (just done 5 today so I know it's right:grin: )