PDA

View Full Version : 3410 flash error



David Gibbons
03-07-2003, 09:12 PM
Trying to flash 3410 with m-bus f-bus win xp and kNok95 and I get the following error message

Lead's kNok-Phoenix - build 1
based on kNok - Engine build 22, Frontend build 18

Thanks goes out for the following:
Dejan, Kodo, Viper, Jozso (for hardware and cable support
and of course beta testing), Bph&Co, Saras, IceDragon,
Steina, Epilog, Invisible, Jethro, H-tom, AlAraf, Lead
and all the others who supports knok...
misc_calibrate_delay : 2627.99 BogoMIPS
FLS1_GetFlashParameters : parameters found NHM-2(3410) - DCT3BT2.TIA
FLS1_PreparePhone : found flashing params NHM-2(0) - 65, 0B
FLS1_ConfigurateBootstrapDCT3 : checksum is 4A8B
FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
Cannot prepare phone
Can someone tell me if I am using wrong software or if I have missed something out Cheers.

bobl
04-07-2003, 06:52 AM
How are you "powering on" the phone?

The best way is to simply plug in the charger (Which is obviously connected to a mains supply that's on). This will "wake up" the phone which is what you want to do. Don't switch on the phone using the switch, just use the charger as above.

Gluck

Bob

chunkhead
04-07-2003, 04:53 PM
What I think my friend Bobl failed to realise is that you do not have a flasher cable!:D

There are two types of cable, an M\Fbus(COM) and a Flasher cable (LPT)! You will need the LPT cable to flash your phone as the COM cable is for FAID and logo's and stuff!;)

David Gibbons
04-07-2003, 05:08 PM
Thanks Chunkhead that will explain it and thanks to you to Bob sorry if I misled you my cable is only a data cable I will look around for a flaher cable Cheers
Gibbo:)

bobl
04-07-2003, 06:34 PM
No, I simply can't read :D

I was very tired (and ill :( ), and still am. I am starting to feel better...

But yes, you simply do need a flasher cable :)

Cheers

Bob

asgaardro
04-07-2003, 10:53 PM
Originally posted by David Gibbons
Trying to flash 3410 with m-bus f-bus win xp and kNok95 and I get the following error message

Lead's kNok-Phoenix - build 1
based on kNok - Engine build 22, Frontend build 18

Thanks goes out for the following:
Dejan, Kodo, Viper, Jozso (for hardware and cable support
and of course beta testing), Bph&Co, Saras, IceDragon,
Steina, Epilog, Invisible, Jethro, H-tom, AlAraf, Lead
and all the others who supports knok...
misc_calibrate_delay : 2627.99 BogoMIPS
FLS1_GetFlashParameters : parameters found NHM-2(3410) - DCT3BT2.TIA
FLS1_PreparePhone : found flashing params NHM-2(0) - 65, 0B
FLS1_ConfigurateBootstrapDCT3 : checksum is 4A8B
FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
Cannot prepare phone
Can someone tell me if I am using wrong software or if I have missed something out Cheers.

to write a flash to a nokia phone u need dejan flash cable
search the forum 33xx to find the schematics and build a cable cost 10$