PDA

View Full Version : 3310 keep resetting!



luN
11-07-2003, 06:31 PM
my 3310 keep resetting without gaining any signal... i didn't flash it or do anything with the program... it comes suddenly.. i'd tried reflash it, but still not works... when using eeprom tools, dsp test fail... can anyone tell me what should i do? is there any i/c need to be replace?
thanks!

nen77
11-07-2003, 09:32 PM
i tested this 4 times
it worked 2 times


.....50% it is a chance

natnat
12-07-2003, 01:42 AM
got the same problem with my 3310 here lun!

i tried to flash upgrade it to a 3315 however, it displays insert sim even if the sim is already inserted. i tried several sim cards but to no avail.

do you have any solutions yet? please post it here.

thanks!

SmaRkieS
12-07-2003, 04:28 AM
just try to check all the CRC or to set faid and open sp locks, or reset all settings and re enter the IMEI and code, no need to replace the ic if you have a backup of your flash try flash it back..

for more info you can check it to my tread

http://nokiafree.org/forums/t28899/s.html

thank you...

natnat
12-07-2003, 05:40 AM
i've noticed something.

with noktool by rolis v1.9 build2, the MCC+MNC is closed. i tried to open it but it always fails. then when the phone restarts, it is detected to be open. then when it restarts for the second time, the phone says "sim card not accepted" and the MCC+MNC is again closed.

youre right smarkies, it works well when i flash the original backup flash file.

natnat
12-07-2003, 07:29 AM
noticed something again.

when i connect the cable (both the f/mbus and flasher cable) it produces a popping sound -about 4-6 pops!

what could it be. i read something about a damaged IC when you hear a sound but cant locate it now. could my memory be correct? could i have a damaged IC then?

wumpus
12-07-2003, 02:40 PM
I hear a slight "pop" sound too on enabling flashing(woot I thought I was imagining it :), but my phone works fine.

chunkhead
12-07-2003, 04:13 PM
@luN

DSP test fail means the MAD is faulty! This is not good!

@Everyone

Use Knok95 for FAID and Restting:

Quickset FAID, Reset User interface settings, Reset Full Factory Settings, Reset SP Locks, Set new IMEI, Use original IMEI, Quickset faid! In that order!

;)