Unlock myX-3 simlocked after prom restore

[pitone02]

I have a myX-3. Now it's locked "simlock" with or without sim.
An error during a prom restore has locked it.

I can't access hotline menu so what can I do to unlock it?
Please, give me a tip.

Regards.

pitone

[hrco]

You must change field 0 ...last 2 bytes in 00....then you turn off and turn on your phone you fix problem "simlocked".....but is not finish....
FInde what you do it wrokg (becouse you can enter now in hot line menu but whit new imei)...
New imei you will get *#06#....then recalculate MMC code for entering in hot line menu!

[pitone02]

@hrco:

thanks for answer...but i don't know how change field 0.
sagem doctor say field protected and it's not possible to write it.

i have try some speed without results.

other way?

[Habibi]

Simlocked without SIM -> A protected field is wrong...
Did you try old unlocking software on your Phone?
Then usually field 5375 is damaged. Post it here. (Read by calbe)

Hotlinemenue is locked for this mobile...
You even do not reach it with editing field 0.
Get an eeprom Backup of another X3 from the same provider and compaire the checksum protected fields. (5375)


If you want to have the PhoneID,
You may post your IMEI and field 5709 here and lets see...

[pitone02]

imei: 35104935089760-1

field 0: 083A15403905986710
field 5709: BE7CB670

field 5375 is empty

i' searching for a guy that have this phone.....to do a backup

thanks

[Habibi]

This is your PhoneID: 0C140E666948

Unfortunately this does not help you repairing the Simlocked without sim...

[hrco]

Some think is a smart one!
Easy is calculate ID when you hvae calc....which made some one else!
Stop saying anything!
You can must read field 0 becouse field 0 is free on any phone!
And only way is to enter in service menu by keyboard whit changing field 0!
You must change!

[pitone02]

@hrco

ok. do not think i haven't try it?
i have tried and sagem doctor say field is protected at various speed. i have tried with telmem and same answer.

fielad 0 is free to read but not to write (in my phone)
tell me how change field 0 if you think i am in error :(

regards

[Habibi]

@Hrco:

Stop saying anything!
Sorry... No
Lets fight, who may help pitone.. Choose your arms...

@Pitone: Like i told you... Its impossible at the moment to enter Monitormode and read/write protected fields.

As the protected fields cannot be changed, they cannot be wrong...
So your Phone can be repaired..
The X3 has usually these protected fields:

16128
16129
16140
16141
16178
185
227
268
5120
5375
5798
5908
995

Find someone else with X3 and compaire these fields.

I bet your field 5375 is not OK :-)
Post it here and we will see...

[pitone02]

i have another myx-3 equal mine for only few hours.
please, tell me wich fields i must read from this phone and put in mine.

from this phone i have read all field with telmem by cable and field 94, 191, 192, 231, 251, 252, 253, 5250-5270 by hotline menu.
field 5375 is empty in this phone also.
thanks very much


pitone

[hrco]

:)...
my x-3 it can bee very hard....becouse I have one whit field 5709 which hace 3 bytes, and offcourse work perfect....on my luck I hvae frend which have providers code...and I unlock this phone!
So...maybee new version!
Try to read full backup in TEXT file!
Don't worry if you can't read some field, and after finish attach file here!

[pitone02]

these are two backup.

mine and other phone.

[hrco]

You must explain proceduer how you get simlocked, and other thing is you must can change fiedl 0 becouse you can read field 5709!
In this case if you can read field 5709 in all other cases can change field 0!
No "C" change imei , option "5" and edit field 0!

[pitone02]

Now i retry to change field 0 but i have tried few times and always sagemdr said field is protected and cannot be writed.

i have simlock during a prom restore....an error with soft and restore stopped.

power off and on. since this moment, simlock.

[pitone02]

change field 0 doesn't work. it is readble but not writeble.

if i try option C, using phoneid said by habibi, what can i do? can i brake something else?

thanks

[hrco]

becouse all other field is protected!
But if you can change whit option "C" then you can change whit option 5 too!
But you can try whit option "C" but when drsagem ask you ("do you whan to correct all other checksume" ) then say "N" linke no!
Maybe will work!

[pitone02]

Nothing to do. Field 0 is not writeble and changeble with this method.
I have tried option C but it's the same.

i think must be a way to do this....

[hrco]

it is JTAG box for sagem, sometihing like factory sw, becouse you can fill empty boards whit this sw, it have some test point like martech sw for siemens!
But this box cost about 1000eur!
And can repair all sagem which have on market!
So if you itnrested buy!
Or maybe you have somebody in factory of sagem!
P.S.
Keep trying to finde way.....and if you finde poste result!

[pitone02]

ok. i will try

pitone02

[jaytc2003]

you could try using sagem service software. This will allow you to repair field 0 by using a slightly different imei, just change the last few digits of you imei to 00 and click repair. then turn your phone off and back on and it should then let you enter the hotline menu. dont forget to change your imei back to its original though.

[pitone02]

sagem service 2.5 don't recognise my phone: "unknown".
so no one button is clickable.
probably it's out of date for new phone myx series

is this the version that you mean?

[jaytc2003]

no not that sagem service software, you can get this one from the following link.

http://www.maisondugsm.com/logiciel/info.php/soft/42/xd/

This should enable you to change your imei.

I have seen sagem service v3 on google that may help

[pitone02]

v3 is old.

i haven't found software to change imei....for new phone that have protected field....

[pitone02]

solved fixing field 5908.

thanks all for help.