cut_r2000
21-07-2003, 06:35 PM
hi 2 all
today whan i try to flash my 3310 from 4.** to 3310_virgin_eeprom_003D0000.fls it was ok the 3310 working good but whan i also try to flash it to 6.77full the 3310 not working any more & i got this message:
Flash erasing error
91 00 FF expected,but FF FF FF received.
seems,that loader can not erase whole flash
Check Vpp,Vbat voltage,phone type..
and also when i use newknok25b i got this message:
FLS1_ConfigurateBootstrapDCT3 : checksum is 4A8B
FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
FLS1_GeneralSendBootstrapDCT3 : bootstrap seems to be running
FLS1_PreparePhone : invalid NMP returned in phone RAM
FLS1_PreparePhone : detected NMP is NHM-5
FLS1_GeneralSendAlgoCodeDCT3 : checksum is BB8F
FLS1_GeneralSendAlgoCodeDCT3 : algo code seems to be running
FLS1_Write : written block (4 bytes) starting from 00200034
FLS1_Read : read block (256 bytes) starting from 00200000
CMD_handlecommands : cannot analyze phone
anyway to make my 3310 work again
thanks 2 all & best regards
today whan i try to flash my 3310 from 4.** to 3310_virgin_eeprom_003D0000.fls it was ok the 3310 working good but whan i also try to flash it to 6.77full the 3310 not working any more & i got this message:
Flash erasing error
91 00 FF expected,but FF FF FF received.
seems,that loader can not erase whole flash
Check Vpp,Vbat voltage,phone type..
and also when i use newknok25b i got this message:
FLS1_ConfigurateBootstrapDCT3 : checksum is 4A8B
FLE5_DirectInitialiseBootstrapDCT3 : Press power on (if needed)
FLS1_GeneralSendBootstrapDCT3 : bootstrap seems to be running
FLS1_PreparePhone : invalid NMP returned in phone RAM
FLS1_PreparePhone : detected NMP is NHM-5
FLS1_GeneralSendAlgoCodeDCT3 : checksum is BB8F
FLS1_GeneralSendAlgoCodeDCT3 : algo code seems to be running
FLS1_Write : written block (4 bytes) starting from 00200034
FLS1_Read : read block (256 bytes) starting from 00200000
CMD_handlecommands : cannot analyze phone
anyway to make my 3310 work again
thanks 2 all & best regards