Flash 3210 possible with 4 pin cable?

[The Wiep]

Hi,

I searched a bit but only found one topic with info about this.
Is it possible to do everything needed with a 4 pin cable?
If so, what is the difference between 4 and 6 pin?
If not, same question :)

thanks in advance.

[sergo_zmeia]

Check this...www.nokiafree.org/foruums/t34842/s.html
You need all 6 pins.../check the attachment in the replay/
Regards!
Sergo_Zmeia

[The Wiep]

thanks for the reply but the link links to the general discussion.

[sergo_zmeia]

Sorry...this is the wright place: http://nokiafree.org/forums/t34842/s.html
Regards!
Sergo_Zmeia

[bobl]

@sergo_zmeia

Mate, I ain't seen a 3210, so I am a little confused. I have a flash and data cable with PS/2 ends, with four sets of connecters. One of them is a 3210.

Now, that one has four pins on it, I guess that is what this topic is about, does that mean it will not function at all with the flasher cable?

I looked at the pin outs pic (Ty), so I guess for flashing you need the BTEMP and VPP ...I.E. You require a 6 pin PS/2 Head (If one exists)...

That's right? But why do you need those to flash a 3210, when the 33xx series with four pins flashes fine? :(

What a shame, I wanted to flash a friend's 3210 :(

Cheers

Bob

[NokDoc]

Hi,

4 pins is enough.

Flashing, mbus/fbus.

NokDoc

[chunkhead]

Then why were we given 6?

[bobl]

Ty NokDoc, I thought so.

Chunkhead, you said you recieved the same kit as me? I only got a four pin connector.

I can't see any use for a six pin connector, the sockets it connects to are a bit useless :).

(Take a look at sergio's 2nd attachment)

Cheers

Bob

[sergo_zmeia]

Sorryy my mistake..4 pins are enough I really have no idea what are btemp and vpp for...appology for the mitake..
Regards!
Sergo_Zmeia

[The Wiep]

Thanks for all the help,

chunkhead: so I can safely order the cable set from m-99 without wondering if it's a 4 or 6 pin?

will do that this weekend then.

still wondering what the other 2 cables are used for though
I have a datacable for the 3210 which has 6 pins...
bizarre :)

[BOEBOE]

BTemp and VPP are used for auto-powering on the 3210.

I have a 6 heads flasher cable and when I flash the 3210, rolis says, power on shortly, the mobile powers on by itself.

Pretty stupid feature, sometimes, it powers up when I contact the cable with the 3210 or when I start my computer.

[bobl]

@The Wiep

The M99 set is four pin, since I have it :), M99 were no probs for me :)

Cheers

Bob

[sergo_zmeia]

Thanks BOE!
Regards!
Sergo_Zmeia