PDA

View Full Version : 7210 Intrested to know how others got rid of Operator logo


dazbenz
10-08-2003, 11:41 AM
I made a small dot in paint shop pro and uploaded it to
operator logo space and you can't even see it


how have others done it ??


Dot (http://homepage.ntlworld.com/darren.bensley/dot.jpg)


Thanks
marasim
10-08-2003, 12:22 PM
well that dot might still be visible somewhere or ther other im sure, but what u can do is download the transparent gif image as ur operator logo
charme
10-08-2003, 02:12 PM
the tranparent logo cuts of a small part of the battery row so the last and second last dot are same size... look closely and you'll see what I mean
wayneg
10-08-2003, 08:04 PM
what i did was used nokia suite andsent myself a blank logo by sms. didn't use a dot or anything. just opened up the application, clicked send to phone and typed in my own number and 20 seconds later i recieved a logo and saved it. no dot
dazbenz
10-08-2003, 08:10 PM
nobody likes a smart arse Wayne:p


Only joking thats a good one

Cheers
wayneg
10-08-2003, 08:16 PM
sorry me bad
jamin
20-08-2003, 02:14 PM
in case you don't have a cable to load a transparent gif to your phone

use your phone wap to go to:

http://wap.grafiklerim.com/logosil.op

save the transparent logo!

enjoy
mR_CaESaR
20-08-2003, 02:56 PM
If you have a data cable, just put the trasparent gif attached on the phone, and use mobimb and set it as operator logo.

Thats how i did it and it worked.
Thanh
21-08-2003, 09:21 AM
Hi there :)
you can also connect any phone to the PC via data cable, run logo manager, and generate a blank logo (nothing on the screen), save that with your network codes, and send to the 7210 via SMS...... works 100%, no dot, no smaller battery bar.... tested!
Kind regards...
Thanh
Bomans
21-08-2003, 03:09 PM
I got a 7210.

but when I try to send a blank logo like wayneg did I get a white spot instead of a transparant one. (check picture)

The link to the wap site doesn't work with me.

tryed different sites to send a logo, but always the same result.

What am I doing wrong here???

PS: sorry for the bad picture, but my webcam s*cks.
But you will see what I mean
Bomans
22-08-2003, 01:30 AM
bump
dumbcomputers
22-08-2003, 08:04 PM
On my 6200, the blank logo will clear the "AT&T Wireless" for a while but it eventually comes back when I get a strong signal. Do you guys with 7210 have this problem?