Dead Nokia 5130

[bluex_scf]

I have a dead Nokia 5130. The flashing process has been aborted dans now the phone is dead. :cry:
How can i reflash it .. even by reprogramming its memories (Intel F + Atmel 24C64) ...
any method to reflash it by soft ?

[Thanh]

Hi there :)
First, you posted in the wrong section... there is a "51xx/61xx" section where this thread should be located :)
About 5130, you can't kill it by flashing. I have just flashed mine 5130 last sat, it was my very first flash and a great success, as it happened on a home build flasher... also a success :)
I used the program "Knok95" to actually flash the phone. You need to download a flash file (try Indicdican's modded file, i use it, it's nice.... look in the "51xx/61xx" section to download it), connec the flasher cable to the phone, start Knok95 and select "write to phone", then select the .fls file and click "Open". After prompt, shortly press the "power" button. JUST VERY SHORT, do NOT power on the phone! The flashing process starts.
After finish (have a cigarette... Knok is quite slow) start Nokia Tools 1.9 and connect your phone to the data cable (M-Bus). Power on the phone, press "Read" in Nokia Tools and select "Phone info". Wait for it to finish, then press "FAID". Your phone will reboot.... and it should be done :)
Should you get "Contact Service", open the flashfile with G3nolite program and click "Correct checksums", save, and repeat the flashing procedure. That happened to me after the first try, and after the second it was just perfect!
Good luck.....
Thanh