Flash erasing error - received :FF FF FF

[The Wiep]

Hi,

I just got my flashercables so I thought I'd give it a try.
I first made a backup of my phone using rollis (chunkhead's guide)
then I flashed en new mmc, ppm and eeprom to my phone
then I tried using knok but when I connected my phone and fired up knok I got the message "Phone not connected".
I tried using NokTool 1.8 and tried autosetup, this gave me the errormessages, COM2, 3, 4 are busy and then Phone not connected (or can't find phone)
So no luck using the mbus cable.
As I had no luck so far I thought it would be a good idea to flash my backup back to the phone but...
after approx. 80% I get this message:

Flash erasing error;
Must receive 91 00 FF,but received :FF FF FF
Check Vpp,Vbat voltage,phone type ...

I'm afraid my lovely phone is dead :(
I really hope someone can help me here...

I also tried to flash my 3210 and also here I had problem using NokTool and mbus
The reflash of the backup file went good here.

My OS is a fresh installed 98SE (especially for flashing :) )

thanks in advance.

[The Wiep]

hmmmmm, this is weird
I now succeeded in flashing the projects flash to my phone and after that I managed to reflash the backup with success
the problem of not beïng able to use the mbus stays.
Before I did any flashing the mbus cable worked ok because I was able to see that I had rom5 ( :( ) with noktool
I really want to put in new soft because I'm experiencing some probs (see other thread)

thanks so much in advance

[sergo_zmeia]

First when You upgrading or downgrading Your phone You dont need to flash the eeprom area.../keep that in mind strongly!/ about Your data cable is it only Mbus cable or there is a manual switch on it?
Regards!
Sergo_Zmeia

[chunkhead]

Does the Mbus cable work on another machine? Also try changing Com ports on the back of your PC!?;)

[The Wiep]

I'm ashamed... ;)
I changed ports and now it works, the only bizarre thing is that I've connected it to com2 and NokTool finds a phone on com1:rolleyes: :confused:
A small question then, which is best, flash mcu and ppm or a whole flash (fubu) ?
In which cases should I use the mbuscable to update something (since I had some trouble when flashing mcu and ppm).

Thanks for solving the mbus already :)

[chunkhead]

Fubu's are much easier! I keep fubu's of all versions in folders! They are all clean and kept safe! I also modify them as Fubu's! I just make a copy and edit it! The trick is to ALWAYS have the clean ones safe!;)

[The Wiep]

OK then, will get me them fubu's for safe keeping.

Thanks a lot for all the help here.

cya.