How to dismantle T610 ?

[mycomms]

I have a T610 red faceplate....i wanna change it myself anyone knows how to open the back antenne (black, with SE green logo) ? Pls advise.

[fredellioty]

hy m8

the hardest part is removing the antenna cover!

get a pair of tweezers , insert the right prong in between the case and antenna cover on the right side of the camera - push in to lift the clip , the do the same with the left prong to the far left side.

with both prong inserted under the antenna cover - push up the antenna cover to remove , allowing you to get access to the 2 other screws you need to get the front case of.

thanks

[msa]

hy m8

the hardest part is removing the antenna cover!

get a pair of tweezers , insert the right prong in between the case and antenna cover on the right side of the camera - push in to lift the clip , the do the same with the left prong to the far left side.

with both prong inserted under the antenna cover - push up the antenna cover to remove , allowing you to get access to the 2 other screws you need to get the front case of.

thanks


No need to lift corners, the antena cover just slides backwords.

msa

[smigs]

Check out this thread on Howard Forums:

http://www.howardforums.com/showthread.php?s=&threadid=173273

Good luck,
smigs