PDA

View Full Version : 8210 - Worth Fixing???



bradysarlo
05-12-2003, 05:02 PM
I have a 8210 that doesn't get reception (i have updated FAID) and it doesn't ring, it only vibrates. :sad:

I don't have any special equipment - i am guessing that it is a hardware problem.... RIGHT???

Is it worth fixing..... or is it a DUD!! :lol:


THANKS IN ADVANCE
:D



PLEASE SOMEONE FIX THE SMILIES...... PLEASE....... ANYONE??????

bradysarlo
17-12-2003, 08:44 AM
Anyone???........

Alex2003
17-12-2003, 07:26 PM
Try reflash it and reset all setting tu defult

sergo_zmeia
17-12-2003, 07:48 PM
Firs about buzzer..measure it..it must be around 20 ohms....
for no network run a test with Eeprom tools 3.1 and 4.0...post results..
Regards!
Sergo_Zmeia

doradora
18-12-2003, 02:48 AM
i am with Alex, try flashing the phone first.

sergo_zmeia
18-12-2003, 12:35 PM
Mr. doradora....a pice of advice....always run a test first..this will give U a point where to start...to repair elektronics we need eyes which are test progies and hardware equipment...
Regards!
Sergo_Zmeia

marky752000
31-12-2003, 02:12 AM
>>Firs about buzzer..measure it..it must be around 20 ohms....

If the buzzer is ok, then check the continuity between pin 5 of chip N500 and the buzzer as it could also be a broken track.

As for the no reception, because you have already updated the FAID, there is no need to reflash.
Test it with Eeprom tools.

Best Regards

Mark

dugi
14-01-2004, 06:43 PM
could you send me virgin eeprom for n 8210??
my e-mail: [email protected]
thanks a lot!

best regards
dugi
p.s.
i'm from polish