brinki
09-02-2004, 12:11 AM
I need solution for Motorola C200.
I unlocked phone with "Motorola C200 service software HACKGSM.NET".
Phone was unlocked O.K. I was trying activate language with the same software, but without changes.
I download from internet C200 RUS flash. I try activate language with "Service Dmtool 3.18[MC]".
I set:
phone: AS
database file: AS1122.bin
BOOT FILE: j_flash_007.mot
FLASH FILE: AS112240.apl
LP FILE: alp1214A_rus.mot
I check DOWNLOAD CODE and check DOWNLOAD LANGUAGE
When I clik to DOWNLOAD phone start flashing.
Flashing has been O.K., but I was given this message (you must read from bottom to up)
----
Warning!! Code(Ver[3]):0xO1150001 LP(Ver[3]):0x01160001
Language Pack Mot Converts OK! Size=402112
Enter to download language mode...
Wait For Target Ready..
Rs232 Download Start (LP)
Mot Converts OK! Size=1347792
----
After that try I am READ FLEX OPTIONS but I was given error. I try write flex, but still I give error.
Phone works O.K. but still without language, which I need. All (unlock and flash) I try at night.
At morning try I am switch on phone, but phone was DEAD. :sad:
When I connected charger, phone just LIGHT.
Please help me how revive phone.
I have question:
1. When I will use C200_repair solution, phone will be work or not.
(desolder flash from C200 - solder it to Nokia 3310 - flash phone - solder it to C200)
2. How desolder flash chip from 3310 phone - flash is filled with some epoxide.
3. How I check if flash ID is 002088CF?
4. How correctly read and write FLEX?
Thanks for any answers. Sorry for bad english.
BRINKI
No send me here..
I unlocked phone with "Motorola C200 service software HACKGSM.NET".
Phone was unlocked O.K. I was trying activate language with the same software, but without changes.
I download from internet C200 RUS flash. I try activate language with "Service Dmtool 3.18[MC]".
I set:
phone: AS
database file: AS1122.bin
BOOT FILE: j_flash_007.mot
FLASH FILE: AS112240.apl
LP FILE: alp1214A_rus.mot
I check DOWNLOAD CODE and check DOWNLOAD LANGUAGE
When I clik to DOWNLOAD phone start flashing.
Flashing has been O.K., but I was given this message (you must read from bottom to up)
----
Warning!! Code(Ver[3]):0xO1150001 LP(Ver[3]):0x01160001
Language Pack Mot Converts OK! Size=402112
Enter to download language mode...
Wait For Target Ready..
Rs232 Download Start (LP)
Mot Converts OK! Size=1347792
----
After that try I am READ FLEX OPTIONS but I was given error. I try write flex, but still I give error.
Phone works O.K. but still without language, which I need. All (unlock and flash) I try at night.
At morning try I am switch on phone, but phone was DEAD. :sad:
When I connected charger, phone just LIGHT.
Please help me how revive phone.
I have question:
1. When I will use C200_repair solution, phone will be work or not.
(desolder flash from C200 - solder it to Nokia 3310 - flash phone - solder it to C200)
2. How desolder flash chip from 3310 phone - flash is filled with some epoxide.
3. How I check if flash ID is 002088CF?
4. How correctly read and write FLEX?
Thanks for any answers. Sorry for bad english.
BRINKI
No send me here..