PDA

View Full Version : Flash programms???


winner
10-09-2002, 10:00 PM
I changed language(ppm) for nokia 3210 and 8250 and i need one flash program to send it in my phone...which one is the best...write me a link to download it...
please

best regards

winner
Shidoshi
11-09-2002, 11:11 PM
Hmm...

Nokia DCT3 Flasher by Rolis v4.77

Perform a search on the forum, click the 'search' button on the top-right ;)

Regards,
-Dave
winner
13-09-2002, 11:01 PM
ok...
but when i installed this program my virus scanner found the virus on it...(is this possible or my virus scanner is stupid:)...
kid_rock
14-09-2002, 06:27 AM
backup your phone and use rolis 4.77 to flash....

rolis 4.77 you can download here
winner
15-09-2002, 08:32 PM
ı connect flash cable in my phone and i use a rolis v4.77 to flash but i cant load my file in rolis it says that is something wrong with adresses and characters...

help me shidoshi
my angel
cyahus18
16-09-2002, 12:43 AM
open ur flash use drop down menu select ur phone then press the write button then ok..
hope this help....:cool:
Shidoshi
16-09-2002, 01:36 PM
Hmm...


Originally posted by cyahus18
open ur flash use drop down menu select ur phone then press the write button then ok..
hope this help....:cool:

Sure, what cyahus18 said ;)
The upload address is 0x200000, but the program by default should give you the right address (in case you are using a full backup: EEPROM+MCU+PPM), unless you are using a partial flash, then the address will not be the same as the full flash address ;)

Regards,
-Dave
winner
17-09-2002, 10:03 PM
look !!! im using PPM editv1.0 ...so after editing my file i save it at one directory after that i tried to open with my flash programm ...is this partial flashing,(PPM-MCU)or what??
if it is not -how can i did it ?so full flash...

best regards
Shidoshi
18-09-2002, 01:31 AM
Hmm...

Depends on the file size? A full 3310 flash file is 2048Kb so I don't think there would be too much difference to a 3210/8250 though I could be wrong, if the file seems too small then you most probably have the PPM seperated from the MCU, hence you would need to flash the PPM to a different address, being it just the language pack ;)

The MCU begins at 0x200000, the PPM does not ;)
This all depends on the size of the file you have. I do beleive that PPM Edit can read/write from a full flash just the same as it can from just a PPM file ;) If I'm wrong sue me, but it does seem that you have only the PPM ;)

Cheers,
-Dave