dead a36

[wildgato]

hi!

I have a siemens a36, that after a failed unlock is completely dead. After that, I tried every program I could find, which can be the cause to the problem too.

The phone responds to unlock/repair/read programs, but does not connect. Not even a "wrong sw" message, which it did after the failed unlocking.

Is there any hope for this phone? What combination of flash versions and flasher software?

Thanks in advance for any help,
pedro

[KodeX]

Use All34 2.0.5 cracked by XzZ and create map.

You can download the sw here (http://www.spspart.sk/Zaloha/Siemens/Siemens_All34_cracked_by_XzZ.zip) and the flx file here (http://www.spspart.sk/Zaloha/Siemens/a3x-23_02.flx) .

[wildgato]

thanks for your help.

I used the software you posted, wrote the flash and the correct imei but it still doesn't work.

although it works better: now when I press "power on" the lights light up and then go out as if nothing has happened. before it wouldn't even turn on the lights.

You said about creating a map, but this software does not do such thing. I used "siemens map writer v3.0" to create a log, but I don't have anything where to calculate the map from the log. On program I found always gives me on error about a ocx/dll file, even if it is installed. But I don't even know if I have to write a map file into the phone.

Well, if you could help me a bit more, please do so.

Thanks,
pedro

[JacekPoland]

try this soft to calculate log to map I use this software and it help my A36

[wildgato]

Hi!

JacekPoland and KodeX, thank you very much.

My friend's A36 is now working, after 4 or 5 months in "coma".

Once again, thanks...

Regards,
pedro

[JacekPoland]

no problem it's plesure to help You Best regards