[gsc] spymode - now with auto call accept

[krisha]

hi,

i released my spymode extension, that allows to auto accept calls.
maybe some of you want it.

---
intro:
now it's time to release a new patch.
some of you already might have had an idea, that there's something like that - now it's public.

---
description:
auto accepts all calls, when mobile phone is in spymode. you only have to patch this script and activate spymode!

---
installing:
patch the normal gsc's for spymode, then add this patch.

---
thanks to:
g3gg0, nokdoc, nok5rev & my girlfriend

---
download:
at gsmfreeboard (http://www.gsmfreeboard.eu.org/forum/showthread.php?t=75932). pay attention to following posts there first :)

[mestrini]

Already tried it... man, what a great script :-D

But now, no matter how many refs to the other posts you place here, you'll see spyphones being sold everywhere :p

Just a few tips from me.
Pay attention to the instructions by krisha or you won't make it work



installing:
patch the normal gsc's for spymode, then add this patch.

This means: apply "shortkey.gsc", apply "spymode.gsc" and choose key (0-9) and then apply the mentioned script

Another thing: when downloading from the other site, clik on the link with right button and choose "save as". If you open a new page and select the text to copy it you won't make it work either. happened to me :lol:

Last tip:
After turning phone on, be sure that the keypad is locked and that lights are off. Just then you press the mentioned combination of keys - otherwise LCD would go blank but lights would still be on.
To get the phone to normal status just press same combination again but remember that it still accepts input so don't unlock the keypad berfore image is back or you could make unwanted calls . Another thing, it's normal that after the trick is used (receive call) lights don't come on again unless you unlock keypad and wait for it to automaticaly lock again. Only then lights go back to normal.

Hope it helped ( and remember to read the warnings from the creators ;) )

cheers

[mestrini]

@ krisha

please tell me if the situation below is possible:


I know what I am saying about the software sounds weird but this is what happened...
Phone was fine till I went to send a SMS. As soon as I went to write a message the phone went into an animated screen with all these zig zags with big letters saying the creators name and a copy write logo (can’t remember what the name was)

Then the phone locked up so I turned phone off then on once it powered up it was asking for security code so I tried the factory codes but no luck.

Then I used Nokia tools to do full reset and the phone was fine so that’s why my question. the phone's software must have the creators own script written into it because unless it was written into the flash file it is impossible to come up with a screen like the one I got :roll: :roll: :roll: WEIRD HAY.................



the guy has an original flash with the three scripts you made but so far nothing happened to my phone and no one else complained such thing

do you have some explanation? maybe the guy got bombed by someone (but that shouldn't come up animations and your name :-?

did you leave a time bomb inside the script :lol:

cheers

[GsmCyber]

it's a bug :p or a conflict between some scripts :p ...

time bomb? lololololol

[krisha]

no ... :)
he didn't only use the spymode scripts in an original firmware. there is nowhere the name of g3gg0 or me in these scripts (when they are patched). i think he also used the clock or netgraph.

but, hmm, we maybe should have insert such a bug :p

[mestrini]

I think he's using the flash i made just like i told: original plus your three scripts.

Maybe he got another and didn't mention :-?

i have to check it out

thanks

[ReaperXP]

Where do I specify which key combo to press?

[mestrini]

read my first post carefully and you'll find the answer ;)

[ReaperXP]

I read your post, but am I supposed to recieve a prompt to enter the number I want to use or do I have to insert the number somewhere into the script?

[mestrini]

Upon running script #2 your prompted to insert the number of your choice

[ReaperXP]

I'm running the scripts with g3n0lite 2, but i'm not getting any prompt :sad:

[mestrini]

Did that just now and the window popped-up :-?

Step 1: Run genolite and open a 3310 clean flash;
Step 2: click "Load" button and choose "shortkey_main.gsc". Then click "Run Script" button. Choose your type of phone and "ok".Wait for success message in text box;
Step 3: Click "Load" button and choose "fast_spymode.gsc". Then click "Run Script" button. Choose your type of phone again and "ok". Wait for window to pop-up and type desired key and "ok". wait for success message in text box;
Step 4: Click "Load" button and choose "spy_autoacceptcall.gsc". Then click "Run Script" button. . Choose your type of phone again and "ok". Wait for success message in text box;
Step 5: Fix all checks and save file
Step 6: Flash to phone


well, i think it's clear. hope you can do it m8 :D

cheers

[JUNT]

Step 3: Click "Load" button and choose "fast_spymode.gsc".
cheers

where can i find fast_spymode.gsc, please help. thanks

[bradysarlo]

http://krisha.dyndns.org/handy/spy_autoacceptcall.gsc

[JUNT]

Sir,

Whats the use of this fast_spymode.gsc and purpose.

sorry i cudnt find the forum for this so i ask it here.
thanks.

[mestrini]

fast_spymode is no more than a script that, when patched, allows the user to have a phone with LCD off and lights off upon an incoming call. Still, the phone needs to be handled in order to accept the call. :sad:

The upgrade is the spy_autoaccept that adds the auto-answer feature to the phone. This way one can have a true spy-phone and leave it anywhere to listen to others' conversations ;)

hope it's cleared m8
:smile:
cheers

edit:
don't know if you have the scripts you want so i leave here the three needed for this job ;)

[JUNT]

I tried this patch and it works, thanks,
but my space impact game has affected its not functioning. any idea

[migueslayer]

In which phnes does it work? Just over 3310?

Another question, the spymode can be programed just for workin with just a phone number and not all the incoming calls???
Sorry for bad english.

Thanx

[kraze1984]

I tried this patch and it works, thanks,
but my space impact game has affected its not functioning. any idea

Same bug, Space impact doesn't react on keypresses.
Btw, it also reacts on invert screen patch, but it was already mentioned on the forum.

[jucks]

OK, could someone please tell me, exactly everything i need,
for example, F-Bus or M-bus cables?? which software?? obviously a nokia 3310 is needed, i would apreciate a complete list of software and hardware needed. thanks, Jucks. :)

[mestrini]

You need:
genolite 2.0
flasher cable and Mbus cable
3310
fast_spymode.gsc and autoanswer.gsc scripts
read the procedures list in my post from 22-05-2004 (without step #2)

to learn more about genolite or flashing use the forum (lots of info out there)

cheers

[jucks]

thanks mate, 1 more thing, where can i download genolite 2.0, iv searched but cant find much, most are dead links, Jucks.

[mestrini]

right here in forum download section :grin:

check the link in the bar on top of the page ("Downloads") and then choose DCT3 section ;)

cheers

[jucks]

It seems, whenever i patch the flash, it all goes good, but when i have flashed it, and i test with a sim card in the phone, i can get the screen to go off ect. by pressing *+5 but when i ring it, it just rings like a normal mobile, with the blank screen, Could someone help me, i dont think im apply'ing the autoacceptcall script, is there anything inperticular that i have to do? :-?

[krisha]

@jucks: can you post the g3n0lite output after patching spy_autocallaccept ?

[Sarah1979]

I really need to get this spypone thing sorted
I though I could use it this weekend ...but alas ..I have only just encoutered all this knowledge from you lot !

I have my... 3310

I have 3 files...

fast spymode
spy_autoacceptcall
shortkey_main

I think i just need the right cables or cables ?!?
and the right version of "genolite"

I have got advice from other boards but they are telling me this won't work and I need to short some pins out and i need 2 cables to flash my phone and stuff :( ...Is any of this true ?

Or can i just buy one cable and use genolite to "upload" all these 3 files in order and Bingo !

It seems there is moreof you guys on here that know what you are talking about


Can u help me

[Lexike]

Help me!

Nokia 6610 auto accepted call
:???: :???: :???:

[bradysarlo]

You didn't make it very clear what your question was...
But this thread is about a patch for DCT3 phones.
Please read Forum FAQ.

[Sarah1979]

hi again guys dvirus666 has been a big help !

and i have everything i need - including 3 3310 phones now - i borrowed everyones :)

they are all different firmware ...maybe i need virgin flash ...hmmm don't know
anyway - i have tried various methods using rollis 1.18 and knok95. aqnd i am having no end of problems - i am sure its not barrys file
i clear the full erase using knok and then write his new file BETA from his site
and then ...it looks ok ..i get the new menu and font and stuff. but the screen isin negative ?!? - but no signal - as soon as i go to rolis 1.8 and update faid - bang the security code locks me out - no matter what i do !!

something i s wrong here !!!

same dealon 3 phone s??


so i thought i would try using the krishna scripts and patching a raw FLS

thing is ...i have no idea how to add the patched and what to do ....do u do it in the dump screen ? - what input file do i use and the output file never changes size. have i done it ? - if i have it doesnt work :(

all th cables are fine and the programs are working great - cant help but feel that this should be easier ...maybe i am using the wrong files or ..(more likely - do not have a bloody clue what i am doing )


your kind help would be nmega, mega, mega appreciated


Sarah

[mestrini]

the problem with security code happens when a modded flash is written for the first time to a phone. The solution is to apply the SFR( Factory values) and the problem with locked phone will disappear ;) but also all the info in eeprom (names, tones)

About the inverted screen that is due to a patching of the flash. Just go to the place wher u got it and find out which menu or key sequence can toggle the INVERT ;)

cheers and good luck :-D

[bry82]

can anyone tell me which cable/es I need?
I have a lpt and a com cable.

also step by step detailed instructions would help a lot.
thanks

[bradysarlo]

can anyone tell me which cable/es I need?
I have a lpt and a com cable.

also step by step detailed instructions would help a lot.
thanks


Forum FAQ will answer all your questions...

[nagdarp]

right here in forum download section :grin:

check the link in the bar on top of the page ("Downloads") and then choose DCT3 section ;)

cheers
pls can u mail me the 3310 spy flash file at {EMAIL REMOVED}
thanks in advance.


EDIT: No Send-Me's

[bayleaf]

been trying to add the auto answer 3 scripts to a 3390/b it seems to just come come with errors using (new flash 33xx) is g3nolite 2.0 compatable with 3390 ??,
im desperate to get auto answer on a 3390 flash

[bayleaf]

can anyone confirm this works on 3390 please?

[mestrini]

i did a mod for an american friend and he said it didn't work :-(

[_locker]

OK first post any help apreciated.

Have got usb cable with f bus and mbus facility.

Have nokia 3310

Do i need any other cables?

g3nolite asks for 3310 old or new version, to what is this referring, firmware?

How do i tell which version a 3310 is?

Thank you