Alinus
03-08-2004, 02:12 PM
New Universal VooDoo Box v1.0
In stock now !
It is a special device with 2 different interfaces inside + an electronic switch. Now you have All you need in one small package.
It works on USB and on COM ports. You can connect this Device in many ways. You can use it only on USB or only on COM
port or you can simultaneously connect it to both, USB and COM without interference. It contains an electronic switch to auto-select the
port that it is used. Even if you try to use both at same time you will not damage anything... No need to change cables (and damage them) anymore.
You can use them both, or only one at the time. It is your choice. You only have to change the COM port in the application you use.
You can Flash your phone on USB and in the same time you can olso unlock another phone(s) on different device.
http://downloads.nokiafree.org/d90/voodoobox
http://downloads.nokiafree.org/d89/univboxusb
This Device is the fastest USB device at this time. It supports speeds up to 1 Mbps.
Is it a new box or an old box ? NO, it's both in the same time!!! It contains the well known MAX 3232 IC and an special
designed USB UART asynchronous serial data transfer chip. This chip, comes with special built drivers for
following platforms: Windows 98, Windows 98SE, Windows 2000 / ME / XP, Windows CE,
MAC OS-8 / OS-9, MAC OS-X, Linux 2.40 and greater.
It comes with 52 or 84 cables for service / unlock / tune your phones. All phones cables came with RJ45
connectors so you'll be able to use third party universal cables on this device too. It is designed with 8 LED's to display
all the info you need to get from this device when working or changing modes. You can switch from F-BUS mode to M-BUS mode
simply by pressing shortly on a small switch. If you want to change it back you only have to push again on same switch.
Same way if you need external power for enabling flash mode on specific phone models...
If you want to use this interface only on COM port (RS232) you need to power the device.
You can use for this, the Nokia ACP 8 or ACP 12 chargers.
It works verry nice and it is extremely stable. No errors in connection or any loss in signal.
Price:
130 € (52 cables included in package)
Contact :
Tel : +40723.175.526 sau +40744.66.28.04
e-mail : [email protected]
msn: [email protected]
Yahoo Msg ID: gsm_romania2004
In stock now !
It is a special device with 2 different interfaces inside + an electronic switch. Now you have All you need in one small package.
It works on USB and on COM ports. You can connect this Device in many ways. You can use it only on USB or only on COM
port or you can simultaneously connect it to both, USB and COM without interference. It contains an electronic switch to auto-select the
port that it is used. Even if you try to use both at same time you will not damage anything... No need to change cables (and damage them) anymore.
You can use them both, or only one at the time. It is your choice. You only have to change the COM port in the application you use.
You can Flash your phone on USB and in the same time you can olso unlock another phone(s) on different device.
http://downloads.nokiafree.org/d90/voodoobox
http://downloads.nokiafree.org/d89/univboxusb
This Device is the fastest USB device at this time. It supports speeds up to 1 Mbps.
Is it a new box or an old box ? NO, it's both in the same time!!! It contains the well known MAX 3232 IC and an special
designed USB UART asynchronous serial data transfer chip. This chip, comes with special built drivers for
following platforms: Windows 98, Windows 98SE, Windows 2000 / ME / XP, Windows CE,
MAC OS-8 / OS-9, MAC OS-X, Linux 2.40 and greater.
It comes with 52 or 84 cables for service / unlock / tune your phones. All phones cables came with RJ45
connectors so you'll be able to use third party universal cables on this device too. It is designed with 8 LED's to display
all the info you need to get from this device when working or changing modes. You can switch from F-BUS mode to M-BUS mode
simply by pressing shortly on a small switch. If you want to change it back you only have to push again on same switch.
Same way if you need external power for enabling flash mode on specific phone models...
If you want to use this interface only on COM port (RS232) you need to power the device.
You can use for this, the Nokia ACP 8 or ACP 12 chargers.
It works verry nice and it is extremely stable. No errors in connection or any loss in signal.
Price:
130 € (52 cables included in package)
Contact :
Tel : +40723.175.526 sau +40744.66.28.04
e-mail : [email protected]
msn: [email protected]
Yahoo Msg ID: gsm_romania2004