8850 - get signal, but can't make a call...

[GeeZuZz]

I have a 8850 in my hands right now. The phone seems to work OK - signal is the strongest. But whenever i make a call, it just stops after about 3 seconds after i press "call". No contact is made.

I thought IMEI changing would fix this, but no. I even tried to flash it with a virgin eeprom, and new mcu+ppm, but it still don't want to call.

I tested to check call forwarding status, and that worked fine, it reported that it was not activated - indicating that the antenna or signal should not be the problem.

I've tried many different SIM-cards.

Have someone got a clue?

[fatihorhan]

Try with an other Eeprom. I will send you an Eeprom of my 8850. It doenst have any problems.

[THE FOX]

YOUR BETTER OFF USING A FULL FLASH...:cool:
DO A SEARCH OF THE SITE FOR VERSION 5.31.
OR EMAIL ME, AND ILL SEND IT TO YOU..
WORKS FINE ON MINE...
:grin: :grin:
;)

[GeeZuZz]

The flash is not the problem. The phone acted like that BEFORE it was flashed.

Is the antenna broken? if it's broken, why does it get signal?

[fatihorhan]

@Gezzuz

I had the same problem on a 6210...Than i have flashed an Eeprom from an another 6210 that works...After than it was ok...

I dont think that the problem is from the Antenna. Maybe an another hardware.... Whats about the Eeprom that i Attached?

[GeeZuZz]

Hey! that actually worked! I think.

Thanks!!

[TokeiLampin]

i change the antenna switch