PDA

View Full Version : NEC e616v



pdor
11-10-2004, 02:02 AM
I have buy a Nec e616v but it's simlock
There was a method to unlock??? I need the code or a software for unlock this phonebecause i want change operator 3g... I'm italian and now there are 2 operator that use H3G: 3 and vodafon... my phone is locked on 3 and i want to use vodafone H3G

Thanks

sergo_zmeia
11-10-2004, 07:32 AM
Sorry no solution avaliable fo this model yet...
Regards!
Sergo_Zmeia

contiOK
28-10-2004, 08:05 PM
go here http://thermal.no.sapo.pt ,download "nec calculator" and...



NEC Code Calculator

Put 2g sim into phone

Input IMEI into calculator

Press calculate

Switch 2g phone on

Press down on phone until prompted for unlock code

Enter code after #4960*

Press ok

Then dial 112 followed by send then wait until prompted to change network press yes but before the call connects you must hang up otherwise you will be connected to emergency services.(NOT A GOOD IDEA)

When you hang up the call your phone will register to 2g network after 3-4 seconds.

Known Faults With NEC Calculator

You cannot access Messaging or Contacts menu using this method but I believe that there is a new version coming which rectifys this anomoly.

sergo_zmeia
28-10-2004, 11:07 PM
Sorry..no free solution..check this:
www.sws-redbox.com
or this:
www:furiousdongle.com
Regards!
Sergo_Zmeia

Saarakas
02-11-2004, 03:28 PM
undefinedundefinedundefinedSo no other solution than 2 go and pay 115£ to 3 :???:

Barney2004
11-11-2004, 06:16 PM
I've just bought a e616v today.
Holding the down button doesn't seem to do anything, it just displays 'Please insert correct USIM card', have they closed this method now on the new phones?

Barney

petrosg
14-11-2004, 07:04 PM
http://networkunlocking.com - They unlock your phone for £10 by putting the same code that 3 would give you if you paid them £115.
Hope it helps.

Regards!
Petros Giananros

mprs
17-11-2004, 12:59 AM
ive a brand new nec e616v handset but no sim can i go and buy a new 3g sim as you would any other phone,this phone is fresh from the box-minus sim

jamgambit
05-03-2005, 10:03 PM
go here http://thermal.no.sapo.pt ,download "nec calculator" and...



NEC Code Calculator

Put 2g sim into phone

Input IMEI into calculator

Press calculate

Switch 2g phone on

Press down on phone until prompted for unlock code

Enter code after #4960*

Press ok

Then dial 112 followed by send then wait until prompted to change network press yes but before the call connects you must hang up otherwise you will be connected to emergency services.(NOT A GOOD IDEA)

When you hang up the call your phone will register to 2g network after 3-4 seconds.

Known Faults With NEC Calculator

You cannot access Messaging or Contacts menu using this method but I believe that there is a new version coming which rectifys this anomoly.

Please can you give the direct line? I can't understand the language.

Forhike
05-03-2005, 11:07 PM
Please can you give the direct line? I can't understand the language.

if you need to unlock some nec 3g
download this http://www.gsmsweden.com/nec/nec3g01.rar

then post your hardware fingerprint here

do't use the sollution above after that perhaps you never can't unlock it real

rob_c2k5
17-03-2005, 08:50 PM
hi, could you give me the key for the software, the hardware key is 0EFF-2ED5

Forhike
17-03-2005, 09:19 PM
hi, could you give me the key for the software, the hardware key is 0EFF-2ED5

rob
84E2-35E3-9E87-5D6D-A14C-532F-6547-EA6F-1716-8B85-7479-0762-86FC-1E3D-55CB

paul99gibbs
30-03-2005, 10:45 PM
I used the unlock software on my NEC e616v phone and it has changed my emei code and the language is now in japanese symbols any idea how to get it back

Forhike
31-03-2005, 05:23 AM
I used the unlock software on my NEC e616v phone and it has changed my emei code and the language is now in japanese symbols any idea how to get it back

*00039# - Italy
*00044# - UK English
*00045# - Denmark
*00046# - Sweden
*00047# - Norway
*00048# - Poland
*00033# - France
*00049# - Germany
*00086# - China

Navin
31-03-2005, 08:00 AM
if you need to unlock some nec 3g
download this http://www.gsmsweden.com/nec/nec3g01.rar

then post your hardware fingerprint here

do't use the sollution above after that perhaps you never can't unlock it real

Hi

I've got a NEC E313 phone which is locked to "3" in UK

Hardware fingerprint is 5F5E-6385

Pls send the registration name and Key

thanks

Forhike
31-03-2005, 08:13 AM
Hi

I've got a NEC E313 phone which is locked to "3" in UK

Hardware fingerprint is 5F5E-6385

Pls send the registration name and Key

thanks

Hello!

i have stoped to give away free keys since all hwo have got free keys seem to want free support to? odd :eek:

but i can give you same versione with a loader that generates a key free for you, but then you have to set bios date and win clock to 2005-01-25
before running loader. or perhaps it works if you make a time.ini and place as same dir as app...

i'm gona upload it to my support area later you can get it here http://gsm.sunk.se/nec/

Forhike
01-04-2005, 08:08 AM
Nec Code reader v1.6
http://gsm.sunk.se/nec/Appz/Nec_3G_Code_Reader_v1.6.zip

Nec Direct unlocker v1.44
http://gsm.sunk.se/nec/Appz/Nec_3G_Direct_Unlocker_v1.44.zip

New nec code reader v1.2 same as the version eweryone is selling but loader included to make the key
http://gsm.sunk.se/nec/Appz/New%20Nec%203G%20Code%20Reader%20v1.2%20+%20Loader%20FREE.zip

Nec super tools free application that can unlock nec 3g phones using com cable
http://gsm.sunk.se/nec/Appz/Nec%20Super%20Tools/

dmu
11-04-2005, 12:35 PM
I Try To Use V1.6 Version Many Times.always Shows Time Out.finished.i Don't Know Why?

Forhike
11-04-2005, 02:35 PM
I Try To Use V1.6 Version Many Times.always Shows Time Out.finished.i Don't Know Why?


perhaps it's cable or driver error

__ivan__
12-04-2005, 12:04 AM
Hi, is nec codes reader 1.6 better than 1.2 does any of these work with XP, where can i buy USB cabel for nec that workes with nec code reader software? is there any better program for ulocking nec phones... this software can only onlock 4-5 types!

dmu
12-04-2005, 04:33 AM
perhaps it's cable or driver error

I use the usb cable.The usb cable is one of the nec e616v accessories.
Maybe isn't this cable?The other special usb cable?
The driver software was downloaded from your web.Setup is ok.

NEC Phile
13-04-2005, 01:36 PM
Hi Forhike,
I have tried using NEC3GR software with my now modded cable, but it will not unlock, I did the *#06# which confirms that the software is ver.22 Now I no that this software will not work with this ver.22 on the NEC e616V. It has been suggested that I downgrade the version to anything below this release. Also I tried your web links below and got blank pages, can you give the link to any other location or you could send to me by email, I have broadband so do not worry for size of file.
Thank for your help

NEC Phile


Nec Code reader v1.6
http://gsm.sunk.se/nec/Appz/Nec_3G_Code_Reader_v1.6.zip

Nec Direct unlocker v1.44
http://gsm.sunk.se/nec/Appz/Nec_3G_Direct_Unlocker_v1.44.zip

New nec code reader v1.2 same as the version eweryone is selling but loader included to make the key
http://gsm.sunk.se/nec/Appz/New%20Nec%203G%20Code%20Reader%20v1.2%20+%20Loader%20FREE.zip

Nec super tools free application that can unlock nec 3g phones using com cable
http://gsm.sunk.se/nec/Appz/Nec%20Super%20Tools/

jamgambit
17-04-2005, 08:58 PM
if you need to unlock some nec 3g
download this http://www.gsmsweden.com/nec/nec3g01.rar

then post your hardware fingerprint here

do't use the sollution above after that perhaps you never can't unlock it real

Link is Not working, I have the usb cable for the e616v. what next?

Forhike
17-04-2005, 09:01 PM
sorry i did change the folder on my site to same as my folders on my workstation for easier updates in the future

http://gsm.sunk.se/-=GSM%202005=-/NEC/Appz/

gulzar
21-04-2005, 05:46 AM
sorry i did change the folder on my site to same as my folders on my workstation for easier updates in the future

http://gsm.sunk.se/-=GSM%202005=-/NEC/Appz/

Is ti work with xp,
Hardware fingerprint: 3594-7D53
pleas give me the key

It will really helpful to me

Forhike
21-04-2005, 08:11 AM
Is ti work with xp,
Hardware fingerprint: 3594-7D53
pleas give me the key

It will really helpful to me

1.4 and 1.6 works on xp,

1.2 with keygen only works on win98 since the keygen is not compatible with xp.

and if you want me to calculate codes they cost 10$
but there are alot of free apps there you can use them

gulzar
21-04-2005, 11:51 AM
1.4 and 1.6 works on xp,

1.2 with keygen only works on win98 since the keygen is not compatible with xp.

and if you want me to calculate codes they cost 10$
but there are alot of free apps there you can use them

I tryied to find working apps since last 4 days. but not founding any. most of all need key.

found 1 but it say rx_error, dont know why.

1 thing more, Im not too rich to buy with 10$, but wish u to hav success ur sales with other.

hav a nice day.

Forhike
21-04-2005, 01:32 PM
check cable, drivers or try another unlocker, ex direct unlocker

corsair81
21-04-2005, 04:02 PM
Hi

Do you know a metod for repair the i*ei code ???

Thanks

olikicksass
22-04-2005, 06:46 PM
Hi,

Would anybody be interested in a full tutorial + software in a zip file to be posted. I have the time, its just its pointless if nobody wants it. It will include modding the cable, software, setting up for mms (maybe. just need to find setiings!) Tell me what you think!

Oliver

gulzar
22-04-2005, 07:19 PM
Hi,

Would anybody be interested in a full tutorial + software in a zip file to be posted. I have the time, its just its pointless if nobody wants it. It will include modding the cable, software, setting up for mms (maybe. just need to find setiings!) Tell me what you think!

Oliver

I try to unlock sim lock with direct unlocker 1.44, not unlock but changed the language in chinis. I can't restor it to english. please somebody help me.

Forhike
22-04-2005, 07:44 PM
Hi,

Would anybody be interested in a full tutorial + software in a zip file to be posted. I have the time, its just its pointless if nobody wants it. It will include modding the cable, software, setting up for mms (maybe. just need to find setiings!) Tell me what you think!

Oliver

already exsists

www.gsmsweden.com/sales/NEC3G.exe

not to be rude or anything, i just post files and simple info here, but for paying customers there is compleate info and real manuals for cable mod installation, unlocking and problem solving, but they are paying for this

olikicksass
22-04-2005, 08:28 PM
To change the language back to english, type *00044# at the home screen.

Hope it helps!

Oliver

olikicksass
22-04-2005, 09:47 PM
Here it is

olikicksass
22-04-2005, 09:54 PM
Yes it is available, but:

1) you have to contact them to get the key. on mine, you dont

2) you have to type in the codes onto the phone. On mine, you dont

3) Half the manuals are in swedish!! mine is english!

there you go.

Oliver

gulzar
25-04-2005, 05:07 AM
To change the language back to english, type *00044# at the home screen.

Hope it helps!

Oliver

Thanks Olikicksass.

I restor it. but can u help to unlock sim. I try with direct unlock after modifing the usb cable, but it unlock network but not sim. still my h-set lock with sim.

Please

Frepa
07-05-2005, 06:58 AM
Here you are giveing a lot of solutions for these brands.
God work sir!
Please can you tell me username and password to access your site.
Thankyou ,Best regards!

Best wishes!



Nec Code reader v1.6
http://gsm.sunk.se/nec/Appz/Nec_3G_Code_Reader_v1.6.zip

Nec Direct unlocker v1.44
http://gsm.sunk.se/nec/Appz/Nec_3G_Direct_Unlocker_v1.44.zip

New nec code reader v1.2 same as the version eweryone is selling but loader included to make the key
http://gsm.sunk.se/nec/Appz/New%20Nec%203G%20Code%20Reader%20v1.2%20+%20Loader%20FREE.zip

Nec super tools free application that can unlock nec 3g phones using com cable
http://gsm.sunk.se/nec/Appz/Nec%20Super%20Tools/

PleXo
09-05-2005, 06:44 PM
Here it is

how many phones have you unlocked with this? sorry.. how many phones have you ruined with this?

lol
joking dude

unlocked my nec e616v to a point...

unlocked it first, would accept any phone but then, any time i tryed to use it (eg, call msg etc receive aswell) it came up "unable to connect at this time please try again later", this done this until about 9pm last night, then started working NOTE, this happened on 3 o2 genie simcards, orange simcard, vodafone simcard, then i toped up the simcard worked perfectly until about 5pm 2day, doing what it was doing last night, i duno what is wrong with this, has anyone successfully done this?

also i have a question when i was unlocking it it asked me for imei number, why? nothing about that comes up on the tutorial?, also to others, remember to right click my computer, goto devices, device manager,ports, look for nec obex port and use the port number that says or it wont work, i also noticed when i type *#06# for my imei number it has changed, how does this affect the phone? please reply asap as this is pissing me off, also one more thing, what does the repair button do on the program???
o 4got one thing, when i unlocked it it deleted all my contacts and restored all the settings is that supposed to happen?

thanks, im sure uve wasted about 5minutes reading this if u have the answer please tell me as i will be making a FULL complete tutorial available FREE!
the tutorial will have debug codes, how to SUCCESSFULLY unlock your nec, and more

PleXo
10-05-2005, 12:08 PM
sorry, the orange simcard seems to be working nicely, im going to top it up now and try out the trick to get free java games, i have so far 38games, not sure if they work or not though
i will be setting up a website that you people can all use to send your mobile games! :), wouldnt that be nice :)

ill post back when i get it working.

PleXo
10-05-2005, 04:42 PM
toped up my fone, workin nicely, except i cant get wap to work

wat is the apn address??
i kno i gotta type in *#2634# to unlock it

ive now unlocked my phone about 4times now lol tryign to get it to accept the o2 simcard

btw, can anyone help me with that repair button
when i type in my imei code it comes up sayig about error in emei code and then i get the blue screen of death saying it dumping memory

i know my imei code has changed ive tryed my orginal imei and the new one, also, by the sounds of my phone i think the cause is because the very first time i unlocked it i typed any old number in the imei box on the unlocker,

also, unlocker.exe is a direct unlocker, then why does the title bar of it on the taskbar say New Nec Code Reader ?

is there a program that i can get the restore my imei code
or a code/program i can use to completely wipe my fone out to default settings an relock it then i can start again? lol

would that flash program work maybe, da one they use the downgrade the phone?

if this all works ill be putting up a website soon, u can all enjoy all da info u need then in one place instead of being on 6 different forums lol

btw picked this up if anyone wants it:

ive tryed the o2, works but only get up the o2 website an only loads about half of it then comes up its too big lol

ENGLAND

*VodafoneUK*

Access point name: VodafoneUK
APN address: internet

*Orange*

Access point name: Orange
APN address: orangeinternet

*O2 UK*

Access point name: 02 Internet
APN address: payandgo.o2.co.uk

MMS Proxy: 193.113.200.195
MMS Centre: mmsc.mms.o2.co.uk:8080

*Virgin*

Access point name: VirginMobile
APN address: goto.virginmobile.uk

MMS Proxy: 193.030.166.001
MMS Centre: http://mms.virginmobile.co.uk:8002


SPAIN

*VodafoneES*

Access point name: VodafoneES
APN address: ac.vodafone.es

*Amena*

Access point name: Amena
APN address: internet

IRELAND

*VodafoneIE*

Access point name: VodafoneIE
APN address: isp.vodafone.ie or live.vodafone.com

*O2 IE*

Access point name: 02 Internet
APN address: internet


also i cant get the orange info to work, if anyone can give me the proper info or if any of the above is wrong please tell me as tht will be somethign tht will be onthe website.

this Nec e616V aint a simple unlock, its more like a project that takes ages lol

threepay really must of wanted people to stay on there network with those little weird alien things on the adverts :P

lol

ill leave my phone on with the o2 simcard in it again an see if tht helps.

PleXo
10-05-2005, 08:33 PM
woaw!!!!
best webstie ive saw now!

http://www.gsmegypt.org/support/
http://www.gsmegypt.org/support/
http://www.gsmegypt.org/support/
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


gotta sign up but its free has loads of software an stuff

check it out

btw illkickass or wat ever (cant remember your name lol) im only 14so were nearly da same age lol

PleXo
13-05-2005, 12:39 PM
ok found a way to repair your imei


program called Crazzy 3G tool v5

all simcards now work on my nec e616v perfectly

ill post the program and tutorial soon

mafarrico
31-05-2005, 01:54 AM
Hi!
I've been reading all related to nec 616v, but i cant seem to find an answer to my problem.
I have a serial cable to unlock the phone, but when i try to install the nec drivers to the com ports, always says "windows cannot load the necessary drivers..."

The problem might be that i have WinXp Sp2?
How can i unlock my phone?

Tia,
Mafarrico :???:

Tanuki
06-06-2005, 11:09 AM
*00039# - Italy
*00044# - UK English
*00045# - Denmark
*00046# - Sweden
*00047# - Norway
*00048# - Poland
*00033# - France
*00049# - Germany
*00086# - China

what would be the Number for Japanese? how would I change the language to Japanese?

Thanks

chils41
06-06-2005, 10:34 PM
THIS IS HOW TO UNLOCK PERMANTLY :lol: , I UNLOCKED MY NEC616V LIKE THIS TOO.

I HAVE UPLOADED THE UNLOCK FILE on to angelfire for you asses. :lol: :lol:

http://www.angelfire.com/un/nec0/nec.tt

you will need to rename the file to .exe

as angelfire doesnt host exe files.

ok step 1.

on your phone type *#06# then write the number you get.

once you have changed the file name of the file to .exe

double click the file and enter the number you wrote down and click calculate.

then get your nec 616v,c313,c616,e313,e606,e608 with the 3g sim card inside your phone turn the phone on, then take out the 3g sim card then insert your, 02,orange, t-mobile voadaphone sim card into the phone, then switch the phone off, then back on, it will ask you for a security code, then enter the code that the program generated for your phone.

then boom youll hear a message then your screen will change to what ever sim card u put it.

thats how i unlocked my nec616v everyone have a nice day.

slinky_kid
08-06-2005, 07:33 PM
i just got my NEC e616v unlocked only to discover i cannot dial in or out to it! any ideas? :-(

Forhike
08-06-2005, 07:37 PM
i just got my NEC e616v unlocked only to discover i cannot dial in or out to it! any ideas? :-(

hmm perhaps your imei did change after unlock try nexus or what it's called it's cracked and free, just search the web

salim_khalid1
18-07-2005, 04:35 AM
hi!

i have got an NEC E616V. il be really thankfull i tou send me the details and software. and do tell me that can i unlock my NEC without USB cable ..that is remote login . and does the phone works fine after this ..contacts ..messages..

thanks

darkchild410
24-07-2005, 12:52 AM
I've just bought a e616v today.
Holding the down button doesn't seem to do anything, it just displays 'Please insert correct USIM card', have they closed this method now on the new phones?

Barney
Just wondering if you've rectified your problem? I get the same reaction on my e616. Mine is locked to 3 Australia.

Kpakute
26-07-2005, 02:58 PM
PleXo...........can u tell me where to get this program and please post ur tutorial cos I'm stuck.......cheers


ok found a way to repair your imei


program called Crazzy 3G tool v5

all simcards now work on my nec e616v perfectly

ill post the program and tutorial soon

mickbluekk
20-08-2005, 05:52 PM
Can someone please help me unlock my 616v... ive tryed the method chris said up there ^^. I have a data cable, but i think i need the software. Got my IMEI code and stuff. Any help appreciated.. will pay $10 by paypal to that guy if he can unlock this for me :)

Forhike
20-08-2005, 09:12 PM
Can someone please help me unlock my 616v... ive tryed the method chris said up there ^^. I have a data cable, but i think i need the software. Got my IMEI code and stuff. Any help appreciated.. will pay $10 by paypal to that guy if he can unlock this for me :)

what cable do you have com or usb i have?
if you have com use nexus cracked
if you have usb use new nec3g

mickbluekk
21-08-2005, 05:13 AM
what cable do you have com or usb i have?
if you have com use nexus cracked
if you have usb use new nec3g

Hey man i have USB, i was looking for "NEC3G" but couldnt find it on google and any file sharing progs.. can you point me in direction of it?