PDA

View Full Version : 8250 contuct service


masud58
04-10-2002, 07:19 PM
please help me to clear contuct service. i am flashing with Dejan 104,
but problem still show.


pleeeeeeeeas

mas:confused:
Finn
04-10-2002, 09:05 PM
first of all connect you phone with mbus cable and run EEprom tools 3.1( u can find it in my site www.geocities.com/finn2k1 ).Then check Test and the programm will tell you the reason of contact service.
Swoop
09-10-2002, 02:30 AM
after flashing, my 8250 went contact service... i used eeprom tools and it tells me that there is a PPM error and that the phone must be repaired.

When I try to flash my backup, it says pre loader boot error!!!!

heellllpppppp!!!!!!!!!!!!!!!

what should I do!
wklau
09-10-2002, 05:01 AM
I think something to do with you flashing cable. Maybe loose contact or try to increase the delay time. Consider using rolis 4.78 or 5.xx.
Hope this will help.
Swoop
09-10-2002, 05:38 AM
i'm using the rolis 4.7x version, you mentioned about the 5.xx version... where can i get it?

please provide link.
NokiaPhreak
09-10-2002, 07:45 AM
I think you need to full flash your phone with a working flash file, I meet this problem before, i full flash it with other phone working flash file, and the contact service gone, i don't know what cause the problem.
Swoop
09-10-2002, 08:02 AM
thank for the advice, but the problem is when i try to use knok, it says "cannot prepare phone"...

hay, i'm really lost with this one

help please...
Lapu-Lapu
09-10-2002, 08:52 AM
Originally posted by Swoop
thank for the advice, but the problem is when i try to use knok, it says "cannot prepare phone"...

hay, i'm really lost with this one

help please...

try setting the contacts properly...
Swoop
09-10-2002, 09:08 AM
i think it is properly inserted. i'm holding it firmly pa nga e.
NokiaPhreak
09-10-2002, 03:06 PM
What error when flash with rolis??

Did the cable work with other phone??
kid_rock
09-10-2002, 04:42 PM
if the error is phone RAM is bad, try to replaced....

txt high- check you cable connection or battery....

hope your help this...
Swoop
10-10-2002, 01:20 AM
dear all,

the cable work fine for other models... i just finished 2 units of 3310 for upgrade and it did work fine.

I'm really having a hardtime using this cable with the 82xx. I don't know why.

anyway, thanks for the posts you guys made. I think i'll just put this 8210 in the shelves for a while until I have a new idea on how to deal with it.

thanks again! see u all soon!