Help Need to unlock my nokia 9500

[djblizz28]

Is there any possibilities I can unlock my nokia 9500.. Please badly need it.. thanks

[ninjana]

yes..:)

use asic5
and box serial 32835
use only 1st code
if works use the 7th code
you must remove your card and input the code without the card
download the nokia free 3.10
you will have to select
nokia
DCT4
ASIC 5
and input manualy box serial 32835
reply if succefull;)
download it here
http://unlock.nokiafree.org/NokiaFREE_v310_Nokia_unlock_codes_calculator.zip

[Cosmictej]

do these settings work?

wbr
Cosmictej

[ninjana]

i think yes.. had'nt test it yet..
it happens that in asic 5 codes, in newer phones the only code who works is the 1st:) others gave code error:)
like in nokia 6600
and others..

[djblizz28]

yes..:)

use asic5
and box serial 32835
use only 1st code
if works use the 7th code
you must remove your card and input the code without the card
download the nokia free 3.10
you will have to select
nokia
DCT4
ASIC 5
and input manualy box serial 32835
reply if succefull;)
download it here
http://unlock.nokiafree.org/NokiaFREE_v310_Nokia_unlock_codes_calculator.zip


it is not succesfull... :cry: do you have any other procedure?

[ninjana]

no sory.. that was the only one..
the asic its correct..
should be box serial
but i can not give you the sure of it
keep your attemps:)

[jcellgsm]

Is there any possibilities I can unlock my nokia 9500.. Please badly need it.. thanks
you can also use ufas or griffin it's supported already, hope it will help! :smile:

[seanwosere]

sorry to sound stupid but what is Griffin or Ufas?

Thanks

Sean

[petrosg]

The different code serials.

[djblizz28]

sorry to sound stupid but what is Griffin or Ufas?

Thanks

Sean


where can i get that.. or the ufas thing.. thanks

[seanwosere]

Ok....so there are lots of comments on here but does anyone know if any of them definitely work?

Unlocking all my old phones, even the 9210i was easy....Why is this one being such a pain?

All the best

Sean

[darx]

you can deffinatley use a ufs3 box to unlock you'r 9500 but to buy a ufs box will cost you about £150 as it's a flasher box. it would be cheaper to go to a nokia service centre, there are no codes or clips which will do this phone at the moment.

[mehta_satish2]

Hi...ninja...i too need to unlock my 9500...had tried the software u recommended...but the i didnt get through it fully.... u told to choose ASIC 5 option but whn i select nokia in the first box then , in the second box i choose dct 4 option and then i put in my IMEI no..and then the place and network....
after that there is no option available...so wht should i do after this ...
help me out
thnks..
satish ;-)

[EdgeCrusher]

lately some people is experimenting problems to change the box sn on the standalone version of nokiafree calc v 3.10. Try to use the online calculator.

Best regards
Edge

[Gieffel]

with the standalone calc go into "options" and select "expert mode" you will be allowed to change all what you want
but be carefull most of time default options are the best solution, but not always

BR

[EdgeCrusher]

Mr. Gieffel, thanks for the tip. I forgot that I set the calc for expert mode permanently, that was the problem that people was experimenting and I didn't know what to say. Now I know.

Thanks again
Best regards
Edge

[seanwosere]

Thanks Darx

I noticed a few companies on the net that say they can do a code unlock, but i reckon i will go into a nokia service center as you suggest...better safe than sorry!

[ebinder]

hi

i just unlocked mine :

hxxps://www.unlocks.co.uk

they offered 2 codes - the first worked !

ciao

[khideg]

can you extract and post serials No from this code

[ebinder]

hi

dont have them anymore as it worked and i did not need the keys :) :(

ciao

[andrewleonard]

use asic2
and box serial 32835
use only 1st code
if does not work use the 7th code
you must remove your card and input the code without the card
download the nokia free 3.10
you will have to select
nokia
9500
ASIC 2
and input custom box serial 32835

Works just fine !!

[ceaclimaco]

wow, andrewleonard... have you successfuly unlocked your 9500 using dct calc?

any other verification that andrewleonard codes will work?

[mosgeo]

any other verification that andrewleonard codes will work?

Yes, those settings just unlocked my Orange 9500 first time! I used DCT4 Code Calculator 5.4 by Hollowman, but entered info exactly as described by andrewleonard. And it was ASIC 2, not 5.

PS My first post here -- found this forum while looking to unlock my new 9500 without paying anyone. Great site, thanks! :cool:

[adeel786]

none of the above will unlock my 9500 locked to orange

[bugmenot]

none of the above will unlock my 9500 locked to orange
YES!!! ANDREWLEONARD'S METHOD WORKED FOR ME ON UK T-MOBILE.. THANKS FOO

[lotvx]

era el ultimo intento y lo probe y funciono, aqui les dejo la foto para que verifiquen

it was my last try and it did work, here i left the screenshot for you to verify

http://img234.imageshack.us/img234/7052/nokia9500vr7.th.jpg (http://img234.imageshack.us/my.php?image=nokia9500vr7.jpg)

[johntaylor]

get ur unlock code here http://www.mobileunlocksolutions.com/unlock-your-phone/rs1wp2/