3510i unlocking problem

[fat_bubba]

Hey all,

I'm trying to unlock a Nokia 3510i on T-Mobile, Mix-It tariff. I'm using the NokiaFree calc v.3.10 and have used the following settings:

3510i (RH-9)
United Kingdom
T-Mobile-One 2 One
MCC+MNC: 23430000
Asic2
T-Mobile
32802

Tried 1st & 7th codes - Both failed.

Could anyone suggest what settings are incorrect....?

[RichT]

[QUOTE=fat_bubba]Hey all,

Use free nokia unlock calculator on this site set to V2 codes and enter the 7th code.

[91mg11]

FREE UNLOCKING WEBSITE (http://www.trycktill.com/eng/unlock_swe.asp)

Aswell as the Nokia Free Calc, i use that site, its pretty good, click the english flag at the bottom to translate to english

[browntoa]

FREE UNLOCKING WEBSITE (http://www.trycktill.com/eng/unlock_swe.asp)

Aswell as the Nokia Free Calc, i use that site, its pretty good, click the english flag at the bottom to translate to english

don't post links to other forums..we have a fully working one here !!

[Barny007]

Use free nokia unlock calculator on this site set to V2 codes and enter the 7th code.

Hay.
I'm new and I do'nt know where on this site I can download Free nokia unlock calculator. In Downloads section I can not find him.

Thanks

P.S Sorry. My english it's not very good.

[mestrini]

Hay.
I'm new and I do'nt know where on this site I can download Free nokia unlock calculator. In Downloads section I can not find him.

Thanks

P.S Sorry. My english it's not very good.

try here: http://unlock.nokiafree.org/download.php

but don't use V2 codes has they don't work nowadays.

use expert settings and serials as ONE, Original, ASIC6

good luck

[Barny007]

try here: http://unlock.nokiafree.org/download.php

but don't use V2 codes has they don't work nowadays.

use expert settings and serials as ONE, Original, ASIC6

good luck

Thanks.
It's 3.10 the latest version.

[mestrini]

no, 3.10 isn't the latest version but any version will do as long as you know all variables:

ASIC: 2
MODEL: DCT4
SERIAL: Original, ONE
MCC+MNC: (network code)

cheers

[Barny007]

no, 3.10 isn't the latest version but any version will do as long as you know all variables:

ASIC: 2
MODEL: DCT4
SERIAL: Original, ONE
MCC+MNC: (network code)

cheers

This is the problem. Program not choose correct SERIAL (Asic and Model it's not problem). It's anyway possible to find out, what must I choose in section SERIAL (V2, Original, GAY'S).

Thanks.

[EdgeCrusher]

Go to Options and set the calc to Expert Mode. Once that is done you will be able to enter custom settings.

Select GEN Original (32779) as Mr. Mestrini said. In case you receive code error, try with GEN ONE (32836)

I hope this helps!

Best regards
Edge

[mestrini]

This is the problem. Program not choose correct SERIAL (Asic and Model it's not problem). It's anyway possible to find out, what must I choose in section SERIAL (V2, Original, GAY'S).

Thanks.


two posts (2) where i say which serials are safe to use :eek:

please read answers more carefully

cheers

[Barny007]

two posts (2) where i say which serials are safe to use :eek:

please read answers more carefully

cheers

Sorry for misunderstanding. I think on other models like 2600, 3100, 3200, 6230,... It's possible to find out settings for serials on one place. So that I not ask for each model separately.

Thanks.

[EdgeCrusher]

there are two stickies on this forum, "GEN explained" and "serials study" than are very instructive towards this matter.

It's just a matter of reading the stickies titles.

Best regards
Edge

[mestrini]

@barny007

couldn't understand your post. please be more clear :-P

[Barny007]

Sorry again.

So I say on first. My english it's not very good. I will read these two stickies.

[EdgeCrusher]

No problem at all, anything you may want to know, just ask again and we will be glad to help you!

Best regards
Edge