PDA

View Full Version : Phoenix install problem!!!



AntiFreeZe
05-11-2005, 10:30 AM
I'm need flashing my Nokia 6630 with DCU-2 without others flash Boxes.
I had install this soft:

Nokia DCU-2 Driver v1.00.150.6
WinTESLA v6.10
Crack WinTESLA v6.10
WINTESLA DESKEY DONGLE DRIVERS 32bit v4.63
Driver FLS-4 v2.05

I had choose the COM 3 port on "FLS Virtual Port" (my cable DCU-2 emulation on COM 3).

When I installing Phoenix Service SW 2005.20.7.98 then have a error message:

"Installation cannot continue without dongle.

Insert Nokia dongle and click Retry..."

If I will press "Cansel" then installation will be break.

I'm using win XP SP2.

I'm had not install the DLL's and modules for WinTesla... May be is necessary for flashing?

Help me, plz ;)


http://downloads.nokiafree.org/

electrophoretic
05-11-2005, 04:31 PM
try posting this in the Nokia DCT4 General section... you might get better responses from there!!!

G

mestrini
05-11-2005, 04:37 PM
Wintesla is for DCT3 and Phoenix is for DCT4

You must have Phoenix cracked as it happens to wintesla or own a Phoenix Black Box or even an original FLS box

Since i don't believe it exists a cracked version of Phoenix you're stuck

But if you have any other flashing device (such as Griffin) you can use phoenix original flash files (not phoenix sw) and flash your phones normaly

hope it helps

AntiFreeZe
05-11-2005, 07:53 PM
You must have Phoenix cracked
I'm have Phoenix Service SW 2005.20.7.98. Where find the crack for this or PKD-1 emulator?
In Nokia flahsing Service Manual written:
1. Install Phoenix Service SW 2004.39.7.70 or later
2. Install latest RM-1 data package
3. Attach DKU-2 Cable (code 0730238) to PC
4. Start Phoenix
5. Choose File -> Manage Connections
/////etc

That I may flashing my Nokia 6630 without boxes!

readme_EURO_5.050308.txt :

Requirements:

- Phoenix Service Software 2004.46.5.76 (or newer)
- Prommer (FPS-8) SW (Flash Update package RnD 03.18.000)
Or USB cable (DKU-2) for usb flashing

It is true???

thx :-)