PDA

View Full Version : Op Logo ???



coolhandluke
20-11-2002, 06:19 PM
Has anyone worked out yet how to change the operator logos on certain sims yet???

I have tried the copy way to the correct folders , e-filemanager and selecq1.21 and none have worked. Even changing the extension to *.mbm instead of *.bmp doesn't work.

It was fine on my Voda sim but the 02 sim won't have it.


WEIRD!!!


:confused:

fnvillafuerte
21-11-2002, 05:24 AM
Maybe you have to recheck the format of your operator logo file. The logo file has a very specific format to enable it to be recognize by 7650 as an operator logo. I have an example here using my local GSM network:

Bitmap size : 78x21 pixels
MCC (Mobile Country Code) : 515 (thats for Philippines)
MNC (Mobile Network Code) : 3 (for SmartCom)

Based on the above data, my operator logo should be named with the following syntax:

MCC_MNC_0.mbm

.mbm is the "symbian version" of .bmp. the value after MNC_ is always "0")

so my operator logo file will be:
515_3_0.mbm

In your case, you just substitute the MCC and MNC with your local GSM operator values. Use LogoManager to check your correct MCC, MNC values.

Save the file to your 7650 using any file handling progs, like HandyFiles in this 7650 diractory:

c:\system\apps\phone\oplogo\

Note that you can save only one operator logo file at a time, so everytime you change operator, you have to put in a new file, overwriting the previous one.

The last thing to do is reboot (off - on) your 7650 and if you did it right, the operator logo should be properly displayed. :)

kiddomarc
21-11-2002, 05:34 AM
very well said kabayan! :)

RNSMFD
21-11-2002, 10:18 AM
Hi,

I did exactly what you described, I copied the file 204_04_0.mbm to the directory you said, I then reboot my phone....

But no operator logo, only the text NL KPN which is my operator.

Does anyone have a idea why it doesn't work ?? :confused: :confused:

Raikee
21-11-2002, 10:39 AM
anybody has the Logo Manager ( full ) ?? cuz i seem to have the same problem!

fnvillafuerte
22-11-2002, 07:22 AM
Now I know why... you added extra zero in the MNC!!! Follow my example, do not add "0" to MNC field!!! :confused:

As I mentioned on my post, the operator logo follows a VERY specific syntax, one mistake on the filename syntax and it will not be recognized by the phone anymore.

Change your logo filename from 204_04_0.mbm to 204_4_0.mbm. It should work by now.

To Coolhandluke and Raikee, you also have to remove the "0" in your MNC field. Give it a try and post your result, please. :)

coolhandluke
22-11-2002, 05:31 PM
Still no change m8.

I am on 02 uk and i think they must protect the sim some how ???

Mine is 234_10_0.bmp

and i have tried

234_1_0.bmp and mbm

234_0_0.bmp and mbm

Seems no way around it ???

KodeX
22-11-2002, 07:08 PM
Funny...:D :D :D

My phone works with the XXX.XX.0 format... I'm using Smart and 515_03_0.mbm works fine with me. 515_3_0.mbm doesn't work for me.

ndalink
22-11-2002, 11:18 PM
How to check my MCC & MNC code? (Indonesia - IM3) Anyone can help me please....? :(

stanley3
23-11-2002, 06:19 AM
i cant make it still fnvillafuerte..btw, i used colored bitmap painted in ms paint and then i transferred the file to my phone and renamed it to 515_2_0.mbm, turned my phone off then on again but nothing happens....

KodeX
23-11-2002, 06:24 AM
Originally posted by stanley3
i cant make it still fnvillafuerte..btw, i used colored bitmap painted in ms paint and then i transferred the file to my phone and renamed it to 515_2_0.mbm, turned my phone off then on again but nothing happens....

Have you try the 515_02_0.mbm?

stanley3
23-11-2002, 06:45 AM
still no luck..nothing happens still.. the image is 78x21 colored..and renamed via handyfile..once i renamed it, i reboot my phone and no changes acquired....help is there anything i could do like set as operator logo or something? or is it a firmware problem?

DavidLanz
23-11-2002, 06:29 PM
Originally posted by stanley3
still no luck..nothing happens still.. the image is 78x21 colored..and renamed via handyfile..once i renamed it, i reboot my phone and no changes acquired....help is there anything i could do like set as operator logo or something? or is it a firmware problem?


Mine, either...

I guess it's SIM card's problem... and I still have any clue about this...

DavidLanz

DavidLanz
23-11-2002, 06:41 PM
Originally posted by DavidLanz



Mine, either...

I guess it's SIM card's problem... and I still have any clue about this...

DavidLanz

I got it ! I just changed the file name to 466_97_0.bmp
(NOT the .mbm) and send it to C:\System\Apps\Phone\Oplogo\

It Worked !!

BoyBastos
24-11-2002, 01:44 AM
here easiest way to do it use this program and install the upadte :)

BoyBastos
24-11-2002, 01:45 AM
then install this update

lolipop
24-11-2002, 01:53 AM
BE CAREFULL FRIENDS

The version posted by BoyBastos is the one that created so many problems and system crashes on other 7650's.

Be very carefull when instaling and unistaling, ful of bugs!!!!

Olivier

BoyBastos
24-11-2002, 01:55 AM
hmmm what problems i have installed it and it works :)

lolipop
24-11-2002, 01:57 AM
Many of us had crashes with this version, depending on our S/W, and not small crashes, ones that need a factory return and a flash.
I will not install it !!!


Olivier

BoyBastos
24-11-2002, 02:01 AM
well it works fine with me and so with my friends phones.... so try it just sharing it no problem here so far

mydonnay
24-11-2002, 05:01 AM
No problem with that file over here...
I just installed it to test. Installation run normally, running the program also works...

have u actually tried it lollipop? maybe you have few memories left that's why your phone crashes....

kiddomarc
24-11-2002, 08:47 AM
you just have the wrong file name.