PDA

View Full Version : full reset to original nokia spec



trini_tdma
21-11-2002, 08:18 AM
hi i have some nokia 8260's for at&t i will like to do a full reset on the phones *#7370# dont work...
i will like to know what software i can use to do this reset and also enable the *#7370# reset feature...
as well as unlock all menus and reset life timer (optional)
thanks in advance

fguimet
21-11-2002, 07:02 PM
you need wintesla, to do that
regards from lima
felix

trini_tdma
22-11-2002, 01:34 AM
i have wintesla and i tried it but didn't seem to reactivate the *#7370# i already cleared the irdb and other stuff....

phonedudes
22-11-2002, 08:50 AM
Use the Set default values submenu from the software heading
in Wintesla and you can reset the default values.

DO NOT use FULL FACTORY reset.

telecaster
23-11-2002, 12:58 AM
Originally posted by phonedudes
Use the Set default values submenu from the software heading
in Wintesla and you can reset the default values.

DO NOT use FULL FACTORY reset.

I have a 5165 and the programming is locked on it.I have tryed reseting to factory with wintesla with no luck.What could i try??

BTW why do you say "Do not use Full Factory Reset"?

Thanks

phonedudes
23-11-2002, 05:19 AM
Wintesla was not designed to unlock phones, so other than clearing the irdb tables or setting the band search order,you need to use other methods for that. You can use NOK SOC but be certain the commandclass file is correct for that SW and Model.

The reason we say do NOT use full factory reset is because if you didnt already you will have wiped out the TUNING data for that specific unit. Meaning it will just tune generically to default values which will result in loss of signal or NO SIGNAL. So unless you have a SCOPE/RF Generator/Pwr Meter etc... to retune it you dont want to wipe out the tuning values stored in the phone

PHONEDUDES :) :grin: :)

Mobile Lab
26-11-2002, 05:10 PM
use nokia soc 2 to resat defult settings...

dont use full factroy..

same probalam with me i use nokia soc 2 and its works.

thanks and regards

trini_tdma
26-11-2002, 07:26 PM
still no *#7370#

shadowdancer
12-12-2002, 07:18 PM
Does anyone know what SW unlocks 8260 v6.20 and 5125 v7.00 these are the latest ver. And how:confused:


P.S. I'm currently using nokiasoc2