6250 eeprom

[SpritHansi]

Hi!
I tried to flash a 6250 eeprom to my 6210, but I don't think I have the right eeprom file. I use Rolis flasher. Can someone post a eeprom for 6250 where I can use Rolis flasher to flash it?
Thanks!

[HANDYCRACKER2k2]

try this one

(i don´t have tested it,hope they work)

eeprom 5A0000 - 600000 filesize is 384 kB, so rolis recognized it:-)

[SpritHansi]

When I used that eeprom, I get Contact Service. Ant good solution or another eeprom file anyone?

[HANDYCRACKER2k2]

you also must flash mcu and ppm, if U only flash eeprom, you always get contact service!!!



greetz, handycracker2k2

[SpritHansi]

Hi!
Yes, I did flash the PPM and MCU before the eeprom.

[HANDYCRACKER2k2]

you also must enter a IMEI!!!! and then clear SP LOCKS and update FAID!

(this eeproms have no IMEI,so u will get CS!!!

[SpritHansi]

I tried to change the IMEI, but I didn't get any contact with the phone.

[HANDYCRACKER2k2]

which tool do U use?i used nok tool 1.8 and an m-bus cable!works always 4 me!or u have flashed a damaged mcu and ppm????

i can upload u an FUBU! u only must change imei and faid.....

[SpritHansi]

Maybe that's my problem. If you'll be so kind, please upload it to me. :-)

[HANDYCRACKER2k2]

hi!i ´ve found this one in the net! don´t have tested it,but now GSM 1800 must also work!don´t know about imei, just try it!

(remove ZIP extension, then use newest WINACE for decompressing, otherwise u will get an CRC error!!)

greetz handycracker!

(have splitted it into 4 parts!)

[HANDYCRACKER2k2]

part 1

[HANDYCRACKER2k2]

part 2

[HANDYCRACKER2k2]

part 3

[HANDYCRACKER2k2]

and the last, part 4

[tempe]

Originally posted by HANDYCRACKER2k2
hi!i ´ve found this one in the net! don´t have tested it,but now GSM 1800 must also work!don´t know about imei, just try it!

(remove ZIP extension, then use newest WINACE for decompressing, otherwise u will get an CRC error!!)

greetz handycracker!

(have splitted it into 4 parts!)

I will try this... Thanks in advanced...

[SpritHansi]

Hi!
Thanks. But how do I get theese 4 files you posted to one?
And do I have to remove the SIM card before flashing?

[HANDYCRACKER2k2]

it´s not necessary to remove sim card!


use WINACE 2.2 www.winace.com


remove the -->>> .ZIP <<<-- extension from the files, then put it in the same folder,then doubleclick the first file! 6250.ace!!!

then winace found the other 3 and u can extract the complete file!!!

greetz handycracker2k2

[tempe]

Signal seems OK but caller group freezed...

[SpritHansi]

I just get "Contact Sevice" again. What do I do wrong?
In Rolis Flasher 4.78 I chose Flash and Write and chose the full flash which was posted here. Is this the wrong way to do it?