Let's change de ESN together !!!

English version below please.

Definitivamente la unica forma de hallar una forma efectiva de cambiar el ESN y que funcione correctamente es que trabajemos juntos y no cada uno por su lado.
Por eso les propongo que hagamos posts de las eeprom (.bin) sacadas con Nokiasoc de diferentes modelos y versiones de software para agilizar el proceso.
Esto nos permitirá hacer una base de datos de diferentes eeprom y permite a gente con experiencia en cracking (modestamente me incluyo) en hallar patrones en los archivos que permitan encontrar cuál es el dato que falta modificar en el archivo .bin para que de esta forma el nuevo ESN quede completamente funcional.

Los archivos .bin que se posteen deben ser de ESN que funcionene correctamente. Es decir la eeprom original del teléfono. No sirve de nada postear eeprom con ESN modificados porque ya sabemos que no funcionan.
Propongo que el nombre del archivo sea de la siguiente forma:
[modelo]_[version sw]_[esn en hexadecimal].bin
Ejemplo:
Nokia 5120 version 3.47 con esn FD9ECA1E el nombre del archivo seria -->
5120-NSC1_v3.47_FD9ECA1E.bin

Nokia 6120 version 3.02 con esn FD34FA23 el nombre del archivo seria --->
6120-NSC3_v3.02_FD34FA23.bin

Nokia 5120i version 5.0 con esn FDF43F6A el nombre del archivo seria --->
5120i-NSC1_v5.0_FDF43F6A.bin

RECUERDE COMPRIMIR EL ARCHIVO EN .ZIP ANTES DE POSTEARLO EL NOMBRE DEL ARCHIVO ES EL MISMO PERO CON EXTENSION .ZIP

Quienes no entiendan a lo que me refiero por favor documentense un poco mas para aprender a usar nokisoc y puedan tambien colaborar mandando sus .bin ORIGINALES

Al colocar sus mensajes tratemos en lo posible de hacerlo en ingles y español, o solamete en ingles. pero solamente en español no porque no esta permitido.

Estoy seguro que si tenemos bastantes .bin podremos descifrar el algoritmo de validación. Asi que manos a la obra y a postear .bin SOLO ORIGINALES, MODIFICADOS NO FUNCIONAN.

Para comenzar les posteo el .bin ORIGINAL de un 5120 que tengo .


********* ENGLISH VERSION ************

Definitively the only form of finding an effective form of changing the ESN and that it works correctly it is that we work together and not each one for their side.
For that reason I propose make posts of the eeprom (.bin) taken out with Nokiasoc of different models and software versions to speed up the process.
This will allow us to make a database of different eeprom and it allows to people with experience in cracking (modestly I include myself) in finding patterns in the files that allow to find which data need to be modified in the .bin file so the new ESN is totally functional.

The files.bin that you will post must be of working ESN, I mean, the original eeprom of the telephone. Don't post eeprom with modified ESN because we already know that they don't work.

I intend that the name of the file is in the following way:
[model]_[version sw]_[esn in hex].bin

Example:
Nokia 5120 version 3.47 with esn FD9ECA1E the filename would be -->
5120-NSC1_v3.47_FD9ECA1E.bin

Nokia 6120 version 3.02 with esn FD34FA23 the filename would be --->
6120-NSC3_v3.02_FD34FA23.bin

Nokia 5120i version 5.0 with esn FDF43F6A the filename would be--->
5120i-NSC1_v5.0_FDF43F6A.bin

REMEMBER PACK YOUR .BIN FILE IN ZIP FORMAT, THE FILENAME IS THE SAME BUT WITH .ZIP EXTENSION.ZIP

If you don't understand what I'm talking, please refer documents to learn how to use nokisoc and then you can also collaborate sending your ORIGINAL .bin files.

I am for sure if we have enough .bin files will be able to decrypt the validation algorithm. So let's go and post ORIGINAL .bin files. (MODIFIED .bin files doesn't WORK.)

To begin I post the ORIGINAL .bin of a 5120 that I have

:o Por favor alguien que explique porque no se pude entrar en las versiones8260v6.2 5125v7.0,etc. luego de dar reset con asoc2.;)


Please anybody who can explain why can't access program with*3001#12345# in 8260v6.20, 5125v7.0,etc.. after reset default with asoc??????;)

@guard

First do you have a way to Read and Write your eeprom??

If you do and did make a back up of your eeprom please attach in a post to us or the forum (like Loncho) suggested.

PHONEDUDES

see att file were you need to change on .bin to make it works

I think you need to recalculate FAID

WHIT NOKIASOC2

already have mine on my site along with rudimentary analysis. What you are forgetting is that faid in gsm includes the flash checksums so I asume that the TDMA one will require those as well. And is the thing hilighted in the image the full faid? I know its somewhere at the start of the eeprom and the esn follows it but I don't exactly know where it starts off.

The software you need to read and write eeprom is this:

paulo_mineiro:
Why do you know this part of bin file must be recalculated to esn works?

What or who tell you this info?

HEY GUYS, PLEASE CHEKOUT THIS SOFTWARE.
It calculates checksums for ESN but i don't know how edit the .bin file with this chekcsum.
Test it and post your results here.

That soft is written to calculate the checksum for the cdma phones. Ex. Samsung.


ismael_mj23

I supposed it. Thanks for confirmation

Hola soy de Venezuela, y tengo un problema con mi cable mbus/fbus, yo lo hice de una pagina web que encontre el sirve para tonos, logos y mariqueritas asi, me funciono tambien con wintesla, pero mal, osea mi tele no lo reconoce como conectado aunque funciona con logomanager y programitas asi que no se meten con la eeprom, sera que alguien me puede decir que hice mal? el chip que use es el equivalente al max232 el icl232cpe.

estoy muy interesado en compartir info con ustedes

*********english version by babelfish *********

Hello I am of Venezuela, and I have a problem with my cable mbus/fbus, I did it of a pagina Web that encontre is used for tones, logo and mariqueritas asi, I also work myself with wintesla, but badly, osea my tele does not recognize it as connected although it works with logomanager and programitas asi that does not put with eeprom, sera that somebody can say to me that I made bad? the chip that uses is equivalent to max232 icl232cpe. very I am interested in sharing info with you

Ahh se me olvidaba, alguien sabe como hacer para isertarles sonidos al nokia 6120? me imagino que hay que reprogamar la eeprom, si alguien tiene una reprogramada o sabe donde puedo conseguir una por favor diganmela, o denme una idea de como compilar una para que me funcione con mi telefono, tambien me dijeron que se le podian raprogramar los dibujitos que aparecen en los diferentes menus del telefono, si tiene alguna info en particular porfa diganmela, pronto publico un eeprom de un 5120 con su respectivo ESN para ayudar a Descifrar el codigo de los ESN




english Babel Fish Translation,

Ahh forgot, somebody knows to me like doing for isertar sounds to them to nokia 6120? I imagine that there is to reprogamar eeprom, if somebody has reprogramada or knows where I can obtain diganmela please, or denme an idea of like compiling one so that it works to me with my I telephone, also said to me that they are podian to him to raprogramar the small drawings that appear in different menus from I telephone, if info in individual has some porfa diganmela, soon I publish eeprom of 5120 with their respective ESN to help To decipher I cosay of the ESN

SOLOMON for sure these proving non compatible software with the telephone that tries to read.
if can read with logomanager the cable this good :cool:

El software es totalmente compatible, diseñado para TDMA, pero aun cuando algunos programas funcionan como logomanager, mi telefono no reconoce que el cable esta conectado a el. asi que para programas de flasheo (mi telefono) no responde bien, Aun con el logomanager el no lo reconoce, deberia decir cable de datos conectado y no dice nada!!!


************* English Version (I've Bad english)********


Software is totally compatible, designed for TDMA, but even though some programs work like logomanager, my telephone does not recognize that the cable this connected to him. that for flasheo programs (my I telephone) does not respond well, with logomanager does not even recognize, should to say data cable connected and it does not say anything!

what about the tones for my phone? 6120? who know any form to insert or convert rttl tones to Nokia Binary ringtone? *.RE

I know how to download from my phone, but I don't know how to convert my ours tones, please hel me

*****Español ******

Y quien sabe como introducir tonos al 6120? o alguien sabe como convertir sonidos rttl a el formato de repiques binario de la nokia?

se como extraerlos pero no como convertir los que hago, alguien ayudeme

SOLOMON IF THESE SPEAKING OF SOFTWARE FOR FLASHEAR NEEDS ANOTHER TYPE OF NON SERIAL CABLE, YOU NEED PARALLEL

NO man, these software say: set (or configure) the comunications port, and it give me this options: com1, com2 com3, com4, and i connect the cable in the serial port, but the problem is not in the conection, the problem is the cable, i made/make it, i want to know that: may be the IC that i used? in the plane said MAX232 and I used the ICL232CPE (the Equivalent)

5125-nsc1_6.03_7AF81A92

Logomanager and ringtone stuff never worked for me on tdma phones. If nokiasoc doesnt work and its set to the right comport then you have a problem. If the chip is truly equivalent then you have no problem.

friend solomon, the telephone never says that this connected one to the cable of data, the activity of transfer of data by means of mbus or fbus is not shown on screen by the telephone neither anything resemblance

converter's type for communication rs 232 don't have anything to see all they complete their alone objective that they are made by different companies, cipex, maxin, atmel etc...

------------------------------------------------------------------------------------

amigo solomon, el telefono nunca dice que esta conectado al cable de datos , la actividad de transferencia de datos por medio de mbus o fbus no es mostrada por el telefono en pantalla ni nada parecido ¡¡¡¡

el tipo de conversor para comunicacion rs 232 no tiene nada que ver todos cumplen su objetivo solo que son hechos por diferentes compañias , cipex , maxin , atmel etc...:-D :grin: :D :eek: :) :p :o :) ;) :rolleyes:

Salomon:
I think you don't have installed the right libraries in order to wintesla recognize your phone.

******** ESPAÑOL ********

Para mi que no tienes correctamente instaladas las librerias en el wintesla para que te reconozca correctamente tu teléfono

Saludos

Que pasó que solo dos personas hemos posteados .bin??? Y los demas que??

LONCHO

gracias por sus comentarios pero se que se porque se que tengo instalados los modulos de eintesla, es mas con el wintesla he hecho modificaciones a los nams de mi telefono y funciono, pero lo que me preocupa es el echo de que no aparece en la pantalla cable de datos conectado, cuando un amigo se compro un cable y a el si le aparece en su tele que esta conectado, es un telefono TDMA 6120

******English Version********
Thanks for your comments. I know that wintesla is correctly installed, i have my support modules, i wrote in The NAM special characteres from other languages, but the problem is that my phone dont display data cable connected when in my friend's phone it is displayed (whit another cable)

saludos Salomon,
Creo que debes limpiar los contactos del cable, o los del telefono,si aun no funciona cambia el cable, lo puedes conseguir en ucables.com.

Hi, Salomo.
I think you need to clean the phone contact, or cable contact, if still don't work, change the cable, you con find in ucables.com
Bye. Franky

green gerbil wrote :
Logomanager and ringtone stuff never worked for me on tdma phones. If nokiasoc doesnt work and its set to the right comport then you have a problem. If the chip is truly equivalent then you have no problem.


logomanager version1.28 and 1.29 works perfectly with most tdma models i personally tested with (5120i,5125,6120,6160,6161,8260,and 3320/3360) logomager works with mbus and works also with infrared adapter ..i tested with both and all works perfectly , i just recibed some bugs like this :
i can upload logos to all phones but i just can upload ringtones to 3320/3360

Saludos:
Aun sigo sin solucion para mi problema, nesecito flashear las v7.00 5125, v6.20 8260 v7.01 5165, tienen bloqueado el acceso al NAM . tengo asoc2, pero no funciona

Hi:
I still unknow a solution for my problem, I need to flash v7.00 5125, v6.20 8260, v7.01 5165, have locked the access to the Nam. I have asoc2 but don't work.
\
\please help!!!!!!!!!!!!!!:confused: :confused: :eek:

@guard
We posted in other thread about access to Nam programming.. Post or send us your Eeprom dump.

@REALTHOMAS
You mentioned personally trying several TDMA phones w/LogoManager. Curious on the 33xx series did you try both Mbus and IR or just IR . So both the graphics and ringtones worked?

I read all posted messages, and can't find any solution to this problem, as I mentioned before, for example: the phone is activated in Verizon, I want to activate the same phone in Cingular, all I need is change the IRDB setting, and Access the NAM, the problem is the access to NAM that is lock with a subsidy lock code, without that code I can't access to NAM, or program area. In other cases the phone has access to NAM, and when I reset the IRDB, the access to the NAM automatically lock. Please any people with a solution to this problem reply.....Franky :eek:

Why don't go back to the esn stuff, it was getting interesting.

My recomendations to all friends in the forum, like I once read in other forum READ, READ and READ and when you think you have read enough, KEEP READING.


A thousand times have been said that some options within nokiasoc damages cellphones, if you just read previous post you should know that.


Just my toughts, not to harm anybody.

ismael_mj23

:mad: If you know any solution, why you don't say anything. I know many people with the same problem, in the same versions,
this are newest versions in TDMA, but few people stop to learn,or don't want other to know, to take advantage. Please I need to find a solution to this problem, like others members. Bye Franky.

green gerbil i tested 3320/3360 only with infrared , i have the mbus cable and i dont tested with that ...ill do it soon ;) but 4 me its more easy do it with infrared...all wireless and works great ;)

alguien me puede decir que otra cosa le puedo hacer a mi celular 6120?
graficos lenguajes, lo que sea.

ahhhh i que es la FAID de mi telefono?

**********ENG**************

somebody can say to me that another thing I can do to my cellular 6120?

graphics, languages, etc

what is the phone's FAID?

cual es la diferencia entre los archivos *.bin y los *.FLS? alguien me puede explicar?

****************Eng******************



as is the difference between the archives * bin and * FLS? somebody can explain to me?

Is that the way you want help, by saying "Give it to me" instead of "Please"


I've been in this forum for a while and this is the first time I see a member do this.



But like we all down here say: Hay de todo en la viña del Señor.


Keep Working


ismael_mj23

.bin files are usually eeprom data. The eeprom has the esn, sometimes the phone book, etc. The fls files are usually flash data which is the phones programming instructions and data like ringtones and graphics. FAID is flash authority id, this is computed from flash checksums and things in the eeprom including the esn. If the faid is incorrect, the phone will not ever find signal.

You can ask other members about me helping them, ....


Its easy to come here and want that everything is given to you instead of searching. That topic has been discussed a thousand times in this great forum. JUST SEARCH AND QUIT BUGGIN


Go and tell the prick that sold you that stupid tool to solve your problem instead of coming here and wanting everyone to solve your problems in the way you are doing it.

Dear friends, always here for help in everything that I could.

ismael_mj23

By the way guard, I don't have to give any explanations

PEACE. jijiji

Hi, guys.
To Ismael:
Hey man I don't undestand why or how others members help you. Your posittion here is because others helped you, man; I don't want start an issue here, and don't want a harm anybody, so if you don't want help me okay, no problem with that, but stop posting stupid message, if you don't have to say any in benefics of all members please, please ,please,please, stop posting stupid messages!!!!Bye, your always friend of the life, and future, guard. Puerto Rico

p.s. I'm a puertorican like you. I speak spanish like you. I live in the same island, you know my phone number, call me. I want a drink with you, and meet you in person on sunday in Platano Loco, Aguada. Franky


Peace.:D :D :rolleyes:

Hi guys again,
all I have to say is which I readed all bulletin messages posted, and some members ask the same, but never write anything that solve this. All the members that try to help, only touch the theme. I Know that ASOC2 work, I have the lastest version, and work,also I find a version of ASOC with the capacity of read the eepprom, and lock status,ASOC don't damage the phone, only block the access to NAM programig when is a newest version like 5125v7.00. I would try to post the bin file of any v7.00 phone.:) :) Bye.

To All Member
Hi Guys,:
Finally I find an answer to my question, thanks to all the member that would try to help me. Bye...

P.S. to ismael: thanks for nothing!!!!Gracias por nada!!!!jijiji
:D :) :) :D :grin: :-D :rolleyes: :D

The main topic has lost
Please posts your .bin here !!!



Que paso que la conversacion se fue por otro lado? Este hilo se creo para postear dumps de eeprom hechas con nokia soc, y solo hay 3 archivos.
Vmos muchachos a trabajar!. Yo por ahora no tengo mas porque mis otros telefonos no son nokia

Now you will stop buggin everyone.


I'm proud of you and I know everybody is.

You're all grown up. jijiji.


Beware of the feds. jijijij


ismael_mj23


Besides, WHAT THE HELL is ASOC, I have heard of NokiaSoc, but ASOC.

PEACE