Blinking Msg

**bc77** · 30-07-2003, 03:22 PM

is there any software for creating blinking sms from 9210i

**sektor_1** · 30-07-2003, 03:26 PM

Yes. eMessaging

**sektor_1** · 30-07-2003, 03:27 PM

And here is the crack

**bc77** · 30-07-2003, 03:54 PM

could you please write down the right way oof installing the emessaging please
thankx in advance

**sektor_1** · 30-07-2003, 03:58 PM

Install emessaging, you can either install it on drive c or drive d, its up to you

Then install the crack in the same place where you installed emmessaging. Load up emessaging, goto register put in your name and no serial number, it should register

Then reboot the fone

**denmas** · 31-07-2003, 12:55 AM

Do not forget this:

When eMessaging is running, go to About, then About again.
Scroll down the window and you can find your personal activation code number. Write it down and someday when you reinstall eMessaging (eg. after reformatting the device) you do not need its cracked file again. Just use your activation code under your name. It will work well on updated eMessaging program too.

Regard,

**satria** · 31-07-2003, 02:50 AM

thanks denmas for the tip...

Is it the same for other psiloc apps also?

and how could u know something like that ?

Maybe I have to try all the apps I got ...

**denmas** · 31-07-2003, 03:24 AM

Not all cracked programs can automatically generate personal activation codes.
As I know, cracked programs posted by Band9210i (his threads have been deleted), especially PsilocCracked files, generate the codes.
You can check it on your running programs if you want to know.

**SENSEI8209** · 01-08-2003, 06:59 AM

THANX!
I'VE BEEN LOOKING FOR THIS KINDA SOFTWARE FOR A LONG TIME.
SAFE.
SALAM.

**shriansh** · 01-08-2003, 01:45 PM

i've observed that when i send a flash or blinking sms by emessaging to multiple users ( by writing theier names in the TO: field), the messages are sent as normal messages...

however, when i send the blinking or flash sms to one user only, the message is sent in its proper format (i.e blinking or flash).

is this a prob with my communicator; the software; or the service provider...
??

please help

--shriansh

**sektor_1** · 01-08-2003, 01:49 PM

do they all have the same model of fone, only some nokia's support flashing sms

are all the names seperated by commas in the to field?

The same user that cant get it when they are in a number of reciepients can that user get it when they are the only receipient?

**shriansh** · 01-08-2003, 02:11 PM

yes..
the phones are all fine;
i've sent flash and blinking messages to these people individually, and they have received it.
but only when i seperate usernames by ';' in the to: field,
and then send the flash, blinking sms in bulk, they receive the sms as a normal sms...

is the fact that the messages are stored in outbox until they are sent causing the flash and blink sms's to lose the flash/blink code and get converted into normal?

that could be the only reason i could think of..

the software could also be in fault/ or the service provider...

any ideas? should i re-install e-messaging, or is it just a fault which lies in e-messaging?

can u try out the same in ur phone and find out if u experience the same prob?

**sektor_1** · 01-08-2003, 02:46 PM

ok, will try it out on my fone, but I think that you might have the answer. the fact that they get stored in outbox probably means they lose the extra coding for flashing.

Anyway will let you know

**bc77** · 02-08-2003, 05:46 PM

it seems my bliking msg has stopeed blinking and i dont know what thereason is there any setting i should be knowing before sending a msg
plzzzz help!!

**SENSEI8209** · 03-08-2003, 03:19 AM

I TRIED TO SEND BLINKING MESSAGES TO A 3510 AND A 3310 AND THE MESSAGES DON'T BLINK.
IS THERE SOMETHING THAT I NEED TO SET UP FIRST BEFORE IT STARTS BLINKING.
OR AM I NOT SENDING THE MESSAGES CORRECTLY.
SAFE.
SALAM.

**sektor_1** · 03-08-2003, 11:28 AM

First of all, turn of caps lock.

Secondly only certain fones accept flashing/blinking sms msg if I send one to my 7110 v5.00 it doesnt work but if I send it to my 8210 v5.46 it works. It just a case that some fones accept it and some doent.

**denmas** · 04-08-2003, 02:25 AM

It is stated on the right column in the eMessaging window that this function is supported only by few GSM phones. No further explanation for the 'few GSM phones' words.

Should you ask the receiver for his/her phone type before sending your blinking SMS? Or, Should you ask him/her if your blinking SMS was blinking on his/her phone after sending the message? No way...

The program creator should know these weaknesses and hope it will be updated someday in the future.