could some one please explain the difference between the f bus cable, the m bus cable and a flash cable for nokia 3310 and what you can do with them. thanks in advance, baz.
could some one please explain the difference between the f bus cable, the m bus cable and a flash cable for nokia 3310 and what you can do with them. thanks in advance, baz.
mbus and fbus are two types of data cables, but most of the cables support both mbus and fbus.
mbus mode is slower, and half-duplex, used for unlocking, changing imei and updating faid.
fbus is faster, and full-duplex, used for connecting a computer through the phone (phone acts as a modem).
uploading ringtones logos and changing settings can be done in both modes.
now about flasher cables. flasher cables are used for flashing a software to the phone, for upgrading/downgrading versions, changing language packs, or for uploading a modified flash.
thanks for the info yotamz, i have read some posts which say that you need a flash cable not a data cable to unlock a nokia 3310. is this correct or could i unlock my 3310 with a data cable. if so where could i get info on how to do it. thanks baz
you only need a data cable, with mbus mode.
then download the program noktool by rolis (found here in the dct3 software section).
-open the program.
-click on the bug icon (auto setup)
-click "read phone info" (to check if the connection is ok)
-click on the "SP" button on the upper part of the screen.
-that's it, the phone is unlocked.![]()
if you are having problems connecting to the network after that, you may have to update the faid.
-repeat all the previous steps, but press "FAID" buton, instead of "SP".
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks