EEPROM problems...

[westy]

Flash V 03.45.04-12-01.NPM-5.(c) NMP. scan results
------------------------------------------------------
MCU SW CHK test ............................ Ok.
LPCS [0x29002C..0x29025F]= 0xFC7219D6 ... Ok.
GSMC [0x290260..0x290413]= 0xB3D28FB5 ... Ok.
FONT [0x290414..0x293317]= 0xA7B0963E ... Ok.
TEXT [0x293318..0x2AEEDB]= 0x31DB5D82 ... Ok.
AORD [0x2AEEDC..0x2AF34B]= 0x97D57B10 ... Ok.
TONE [0x2AF34C..0x2B09DB]= 0x5A9F206B ... Ok.
PLMN [0x2B09DC..0x2B25F7]= 0x0B3EB332 ... Ok.
LDB [0x2B25F8..0x2B261B]= 0x4C444234 ... Ok.
DUMFILE [0x2B261C..0x2B263F] ............... skipped
Area after DUMFILE ......................... OK.(0xFF)
String "EEPROM" not found
String "EEPROM" not found
------------------------------------------------------
hi that is what the flsh prog says when i do a scan for errors i guess this is why it doesnt work properly when i flash how do i fix this i have the virgin eeproms but dont know how to add them
This only seems to happen after correcting the ppm in ppm manager
thanks (5510)

[latpol]

change the pchone.

[GeeZuZz]

That is what it shows when you are working with a mcu+ppm flash file. Are you sure you also have the eeprom in it?

What size is the file? (in bytes)

[laleas]

Like GeeZuZz said if in the fls you flashed there was no eeprom then that's what it should write at the end of flashing.
Don't worry, eeprom is still in your phone.

Cheers,
Nick.

[pipoy]

it is safer to work with mcu & ppm only

[westy]

well the thing is the phone has not once funtioend without no signal and turning off ever with an edited flash file yet i can put the back-up on without a problem and not even do the set quick faid in knok... :S