6110 to 6150...if possible, how???

[submasta]

Hey m8s!
I read a post here some time ago, where some people said that you can flash a 6110 to a 6150 and have animated menues, sim-atk, t9 etc.
as i have already flashed my 6150 to v p5.23 and do like the new functions, i´d like to do this with my 6110 too, if possible.


So please help me, if you can!


Greetz, SuBmAsta

[gdeber]

sorry, but 6150 flash is 2mb.
6110 flash size is only 1mb

you can update 6110 only if you cut some function from 6150 mcu (or change flash ic)

[submasta]

I knew that the flash sizes are different, AND THIS IS WHY I AM POSTING THIS QUESTION!!!!
How to cut those functions from mcu to make it fit into 6110 flash ram??

[gdeber]

sorry...

at this moment it's so hard to cut the function you don't want from the firmware:

1) toggle useless ppm chunks
2) toggle useless func from mcu
3) adjust original pointer to new addresses
4) ...

i hope i've understand your question now

sorry for my poor english!!

[ZNOD]

You have 2 choices:

First:
If you want to spend more time, then do what gdeber said, you can also ask the help of a nokia flash file guru (specializing in flash toning), you just have to be patient because most of the time, the flashfile is damaged and is caused by simple mod errors.

Second:
Make it easier by changing the the 6110's flash IC to 6150 flash IC then flashing a 6150 flashfile to the phone. (Works 99.99% - NOT to mention 100%) and most of this cases, the phone was successfully upgraded.

NOTE: 6150 is a dualband and 6110 is a single band

[submasta]

Did I get it right that when ure talking bout changing the 6110´s IC to a 6150´s IC, you mean soldering another flash ram into the phone or what?
Cause I dont think i am able to do that
But anyways, thank you for your propositions and your help.

With greetz from good ol´ germany!

SuBMaSta