easy for you, crazy for me 3310

[baraka42]

Hello Merry Christmas and Happy New Year to all,

i have flashing problem with 3310 as below. allreddy change two flash.
change delay index. no result. other 3310 flash ok.
rolis give flash erasing error 91 00 FF expected but FF FF FF Received.
knock can erase but can't write.

Geocadin give this message

Reading Error
Waiting for phone to respond .
(please POWER ON phone if necessary).
*******************************************************************
V 05.13 11-01-02 NHM-5 (c) NMP.
00200090:ST M28W160T, ALIAS_ID=00898890:Intel 28F160B3-T, size 16Mb
*******************************************************************

Initializing Flash Loader for FlashID:00898890...
Flash Loader is ready.

Initiating read flash to file routines....
Reading flash in progress...
Error: Read flash failed - TX0

Writing Error
Waiting for phone to respond .
(please POWER ON phone if necessary).
*******************************************************************
V 05.13 11-01-02 NHM-5 (c) NMP.
00200090:ST M28W160T, ALIAS_ID=00898890:Intel 28F160B3-T, size 16Mb
*******************************************************************

Initializing Flash Loader for FlashID:00898890...
Flash Loader is ready.

Initiating write file to flash routines.
Erasing flash in progress...
Error: Write block command failed.

thanks in advance.

W.B.R.

[sanjeev_in]

same with me man i am also going mad

[BOEBOE]

Use NokiaFlasher by Rolis

And connect charger while flashing when program asks for power on...

And if you use Windows XP, use userport and set flasher to compatibilyty mode Windows 98

[laroshoceana]

Check voltage supply Vpp, and Vbat. If u flash a phone and there is a deficit in the voltage supply, it will defintely not respond and give t/x low prompt. Check ur ccont output, there lies the problem. U don't have to change the flash ic's, coz based on ur description, its good.