Dead 8210

[noledud]

I have flashed my 8210 ver 5.28 with a full flash for a 8210 ver 5.29 Doh!
The phone now wont switch on!
could somone please tell me step by step how to get my phone working again
i have no back-up of my original data so i need to change my imei no as well.
I have nokia flash tool do i need more software ? and where can i find it !

[Finn]

First of all if u want english language then download from my site mcu and ppm for 8210 5.31.
flash it to your phone.Then go to kickme.to/gsmschwantz and download virgin eeprom fro 8210.Flash it to 00340000.
Switch on phone and run Knok 22(in my site also).Connect phone to mbus cable.Look in the menu and press Set IMEI.Set desired IMEi.Restart phone.Look for sp locks and press Clear sp locks.Restart phone and look for Quick set FAID.Press it and now u have a new brand phone

[corwin]

>> Finn:
you made a small mistake : the eeprom must be flashed at address 003D0000 and not 00340000 (that's where the PPM starts).

Regards.

[Finn]

you re right corwin

[noledud]

that worked fine but i stil cant sort one of them. It gets no signal i have reflashed with 5.31 and virgin eprom then used knock for imie change and sp unlock. then set FAID as far a i know the phone should work fine ?

[deajam]

i have the same problem but cannot turn on so it wont accept flash. wat can i do, please help.