SGH 600 Power can not on.
When i test between the (-) and (+) at the battery pin connector, it's shorted.
But when i use a D/C supply voltage regulator, it power ON, but consume alot of current (More than 0.5A).
Then Try to detached the PA (PF01411B) to see / confirm whether it's shorted, and the answer is no. PA is in good condition, eventhough without the PA, it still consume alot of current.
And now when i connect the D/C supply i found that there's a 8 leg IC at the back top center area (TEA1204) hot (shorted).
What is this IC for?
After removal of this (TEA1204) i found that the power consume is back to normal back (less than 0.2 A)
Please advice
Bookmarks