Results 1 to 11 of 11

Thread: unlocking 8390

  1. #1

    unlocking 8390

    model: nokia 8390
    service: rogers at&t
    want to switch to: fido
    IMEI010093393752847
    IF ANYONE KNOW HOW TO UNLOCK THIS PHONE PLZ REPLY THNX

  2. #2
    Join Date
    Oct 2003
    Location
    USA
    Posts
    269
    [QUOTE=nakata]model: nokia 8390
    service: rogers at&t
    want to switch to: fido
    IMEI010093393752847
    IF ANYONE KNOW HOW TO UNLOCK THIS PHONE PLZ REPLY THNX[/QUOTE]

    IMEI is '010093393752847'
    Type 2
    Provider is '30272' (Rogers, Cdn)

    #pw+789940614771644+7#

    Verify the “IMEI” number is the same as the fifteen digit number at the very top of this post by dialling *#06#.

    Power down phone, wait 15 seconds, remove battery, remove SIM. Replace battery and power up – “Insert SIM Card” displayed.

    Type the following as instructed:

    a. #
    b. * three times for “p”
    c. * four times for “w”
    d. * two times for “+”
    e. Type the 15 digit code (Carefully!)
    f. * two times for “+”
    g. The number “1, 5 or 7” (Whatever corresponds to the last digit in unlock code)
    h. #
    Message such as "Phone Restriction Off" displayed if correct code entered. Code is unique to only this IMEI number/phone. You have 5 attempts to get code right.
    Please respond with results.

  3. #3

    hey

    hey buddy it didnt not work for some reason

  4. #4

    Hey Again

    the AMEI is 010093303752847
    sorry it was wrong before

  5. #5
    Join Date
    Oct 2003
    Location
    USA
    Posts
    269
    [QUOTE=nakata]the AMEI is 010093303752847
    sorry it was wrong before[/QUOTE]

    IMEI is '010093303752847'
    Type 2
    Provider is '30272' (Rogers, Cdn)

    Only use codes once.

    #pw+717100144523502+7#

    Verify the “IMEI” number is the same as the fifteen digit number at the very top of this post by dialling *#06#.

    Power down phone, wait 15 seconds, remove battery, remove SIM. Replace battery and power up – “Insert SIM Card” displayed.

    Type the following as instructed:

    a. #
    b. * three times for “p”
    c. * four times for “w”
    d. * two times for “+”
    e. Type the 15 digit code (Carefully!)
    f. * two times for “+”
    g. The number “1, 5 or 7” (Whatever corresponds to the last digit in unlock code)
    h. #
    Message such as "Phone Restriction Off" displayed if correct code entered. Code is unique to only this IMEI number/phone. You have 5 attempts to get code right.
    Please respond with results.

  6. #6

    hey

    hey it didnt work
    the AMEI code is correct but it didnt work

  7. #7
    Join Date
    Oct 2003
    Location
    USA
    Posts
    269
    [QUOTE=nakata]hey it didnt work
    the AMEI code is correct but it didnt work[/QUOTE

    How many codes have you entered into the phone? You only have five tries. Did it say "Code Error" or "Cannot Undo Restriction"???

  8. #8
    [QUOTE=nakata]the AMEI is 010093303752847
    sorry it was wrong before[/QUOTE]

    Code posted by Protocol
    are not correct

    #pw+717100144523502+7#
    post reply

    Sorry about this
    My mistake the codes of Protocol
    are correct
    did not read other posts
    Last edited by crashynot; 22-11-2003 at 09:51 PM.

  9. #9

    hey

    it says cannot undo restriction

  10. #10
    Sorry to many Wrong codes
    you will have to use the cable and sofware method
    you only have 5 trys to unlock your fone by code
    sorry i cant help you more

  11. #11
    Join Date
    Oct 2003
    Location
    USA
    Posts
    269
    [QUOTE=crashynot]Code posted by Protocol
    are not correct

    #pw+717100144523502+7#
    post reply[/QUOTE]

    Is that a fact crashy?? what code did I enter in post No. 5 then??

    How about this one:
    <<<<<IMEI is '010093303752847'
    Type 2
    Provider is '30272' (Rogers, Cdn)

    Only use codes once.

    #pw+717100144523502+7#>>>>>>>

    Read post five, and then tell me that I generated the wrong code.

    The code generated for his first IMEI (as he posted it) is also correct.
    Last edited by Protocol; 22-11-2003 at 09:27 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •