read a 3310 flash from phone

[or4zio]

Hi guys,
i have a problem. i have a 3310 and when i try to read the flash with rolis 4.79 whit a parallel cable it says :

preloader init error :
- phone RAM is bad
- you selected wrong phone type

(i've tried other 3310 and it works normally, the problem is only on this one)

i think it could be "locked"

anyone can help me? what can i do?

regards

[mestrini]

try rolis 4.78 and if result is same then hardware malfunction is problably the reason...

if so then the solution is replacing the ram chip

cheers

[or4zio]

the result is same with rolis 478
when i try to read the flash, it says

wait for boot counter accept(Phone TX=High) ...

and then in a window...

preloader init error :
- phone RAM is bad
- you selected wrong phone type

i don't think the problem is the cable because i read and write other flash whitout any problem. only with this 3310 i've this problem.
i know this cell was programmed by a guy whit a modded flash, so it seems to be such protected in reading.
any suggestion? is possible to protect a flash from reading?

regards

[mestrini]

did you read what i wrote?

and no, it's not possible to protect a flash from reading...

[or4zio]

yes.. i read what you wrote.
so the only solution is to replace the ram chip