Results 1 to 2 of 2

Thread: 8210 loosing signal, calls are OK. HW or FW bug?

  1. #1
    Join Date
    Aug 2003
    Location
    Prague,Czech Republic,Europe,Earth
    Posts
    6

    8210 loosing signal, calls are OK. HW or FW bug?

    I found 8210 phone in england. Phone was working all right. I used my friends charger for 6100, which gives twice current (700mA) and twice voltage (6V) than original charger for 8210. After 3 days phone started loosing signal and after 5 days gets useless. Weird thing is that if it has signal and I make a call, I can call for 1 hour without a signal drop, it newer lost signal during call. After call it usually loose signal again. What is wrong with my phone? It has 5.27 FW with services menu enabled. Could it be FW problem? Thanks for any ideas

  2. #2
    Join Date
    Aug 2003
    Location
    Purok 7, Brgy. Dontogan, B.C
    Posts
    257

    Losing Signal

    Try Re-flashing a 5.27 clean firmware flash, also check your batteries if they are still ok (power is a factor when talking about signals) also try using other batteries if you experience the same problem

    8210 users in our place usually experiences that problem and tried to re-flash it using a clean firmware version, and it worked, the other solution is that, you change the battery without flashing the phone. it also works. (avoid using different chargers on a single battery)
    Last edited by ZNOD; 07-09-2003 at 07:54 PM.
    ZNOD EX

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •