Results 1 to 8 of 8

Thread: is programming valid imsi sufficient get network?

  1. #1

    is programming valid imsi sufficient get network?

    Hello,
    is programming only a valid imsi is sufficient to get network, or i must have again a valid ki?
    thanks.

  2. #2
    Hi hall,

    Depends of the operator, but is factible. You don´t authenticate to make a call o change the LAC. (The ki only use when authenticate)

    Regards,
    Sir Graham.

  3. #3
    Join Date
    Jul 2003
    Location
    The Netherlands
    Posts
    254
    GSM is authenticated with both the IMSI as the Ki. The first is like your username, the second the secret password.
    So, no, you can't gain access with only the IMSI.

  4. #4
    Hi,

    I am not explaint correct.

    I say That " If you only use the IMSI, the phone have coverture". When you makes a call they make a authenticate. If you put only the IMSI the phone conects to the network but can´t make calls...

    Regards,
    Sir Graham.

  5. #5
    Join Date
    Jul 2003
    Location
    The Netherlands
    Posts
    254
    So, assuming you are right, you can *receive* calls and messages without authenticating?
    Or is authenticating forced on accepting calls too?
    Last edited by wumpus; 07-07-2003 at 01:19 PM.

  6. #6
    Sirgraham is right, i have tested it with valid imsi we can get network(signal), but we can call.

  7. #7
    Join Date
    Jul 2003
    Location
    The Netherlands
    Posts
    254
    Can you still get network with an invalid IMSI? I've heard you can still make calls to 112 and 911 even without a SIM card..

  8. #8
    Hi wumpus,

    With invalid "Ki", not IMSI.

    you have coverture with Invalid KI. But if you don´t authenticate
    you can get the new TMSI.

    I suppose you use the TMSI keep in the SIM (with the LAC). I don´t know what happend if someboy calls to this terminal in this situation.

    It´s a good try.... If someboy makes this try: please, post the result....

    Regards,
    Sir Graham.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •